Koncocoo

Best Automotive Performance Electric Assist Choke Controls

Edelbrock 9906 Performer 600 CFM Vacuum Secondary Electric Choke Remanufactured Carburetor
The Edelbrock Performer 600 CFM Vacuum Secondary Electric Choke Remanufactured Carburetors are completely disassembled, inspected and thoroughly cleaned before reassembly for maximum fuel economy. Enter your model number to make sure this fits.
Reviews
"I ended up buying an AEM Wideband A/F guage and tuned the carb to Idle at 14.7, Cruise at 14-15, and WOT 12.5-13.5."
"did not have dvd that comes with carb."
"it was missing parts gaskets electric choke wiring carb plugs I am not happy."
"Had no problems."
"I only had 50 miles on the carb before it stopped being safe to drive."
"Replaced carb with another Edelbrock 600 CFM that was on another running vehicle and the fuel pressure regulator works fine."
"I was getting gas to the carb but not thru the carb. I did not run truck long enough to have it look like this and the gas I am using I bought that day and checked to see from leftover in the can and it is clean good gas... At this point I am very disapointed..."
"As soon as I got it the electric choke went out, its a pain in the butt to keep tuned, runs too rich or too lean and hard to find a happy spot I can leave it for even a week but I have to keep changing it almost daily."
Find Best Price at Amazon
Holley 45-224S Shiny Finish Electric Choke Conversion Kit
The Holley electric choke conversion kit comes with an external vacuum source for top performance. Kit includes necessary hardware for installation.
Reviews
"Worked perfect and fits the Holley 0-4412S Model 2300 500 CFM 2-Barrel I bought along with it."
"I bought this electric choke because I needed a replacement."
"I WOULD ADVISE ANYONE WHO PURCHASE'S A HOLLEY CARB TO GET ONE!"
Find Best Price at Amazon
Edelbrock 9907 Reman. 750CFM Carburetor - Manual Choke
The Edelbrock 9907 Remanufactured Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. Enter your model number to make sure this fits.
Reviews
"This carb has not worked right from day one."
Find Best Price at Amazon

Best Automotive Replacement Electric Assist Choke Controls

Edelbrock 9906 Performer 600 CFM Vacuum Secondary Electric Choke Remanufactured Carburetor
The Edelbrock Performer 600 CFM Vacuum Secondary Electric Choke Remanufactured Carburetors are completely disassembled, inspected and thoroughly cleaned before reassembly for maximum fuel economy. Enter your model number to make sure this fits.
Reviews
"I ended up buying an AEM Wideband A/F guage and tuned the carb to Idle at 14.7, Cruise at 14-15, and WOT 12.5-13.5."
"did not have dvd that comes with carb."
"it was missing parts gaskets electric choke wiring carb plugs I am not happy."
"Had no problems."
"I only had 50 miles on the carb before it stopped being safe to drive."
"Replaced carb with another Edelbrock 600 CFM that was on another running vehicle and the fuel pressure regulator works fine."
"I was getting gas to the carb but not thru the carb. I did not run truck long enough to have it look like this and the gas I am using I bought that day and checked to see from leftover in the can and it is clean good gas... At this point I am very disapointed..."
"As soon as I got it the electric choke went out, its a pain in the butt to keep tuned, runs too rich or too lean and hard to find a happy spot I can leave it for even a week but I have to keep changing it almost daily."
Find Best Price at Amazon

Best Automotive Performance Electric Choke Conversion Kits

Edelbrock 1413 EPS 800 Square-Bore Electric Choke
The Edelbrock Carburetor EPS 800 CFM Electric Choke is designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Comes with 113 primary metering jets, 101 secondary metering jets and 0.071 x 0.047 metering rods.
Reviews
"Slapped this big dog on my RV 454 and got instant performance out of the box."
"Since I had to take the old carb off and I have been wanting to see if a larger carb would help my 454 pull a new trailer, I stepped up from a 600 to and 800."
"Matches my intake, bigger than the 1407 I had on it, it's brand new, hasn't been rebuilt 10 times, came w/video to explain some stuff."
"Just as described, worked very well right out of the box."
Find Best Price at Amazon

Best Automotive Performance Carburetor Choke Pull Offs

Genuine Mopar P4452033 Valve Spring Retainer
Available in two levels of performance: Chrome Moly for restoration and heavy-duty applications and Titanium for top-level race performance. Enter your model number to make sure this fits.
Find Best Price at Amazon

Best Automotive Performance Carburetor Choke Thermostats

Holley 45-267 Electro-Dyn Heat Sensor
This heat sensor is designed to allow the choke mechanism to automatically speed up or slow down its operation by sensing intake manifold and engine block heat. Senses intake manifold and engine block heat.
Reviews
"It seemed like my Holley choke was always either staying on too long or dropping out to soon."
"This little marvel made a silk purse out of a sow's ear of a smogger-Holley carb'ed 1981 Chev truck with an RV cam (thus requiring just a skosh richer mixture here and there)."
"This keeps the choke from burning off too quickly causing the engine to back fire through the carb killing cold start drivability, possibly causing carb damage or a engine fire."
Find Best Price at Amazon

Best Automotive Performance Carburetors

Edelbrock 1406 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke Carburetor
The Edelbrock Performer Square Bore Air Valve Secondary Electric Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. Primary venturi booster is a bottom feed design for smoother acceleration and better drivability.
Reviews
"Runs like a horse, would recommend."
"Car started right up after fuel reached the component."
"My boat weighs 5000lb empty but with all my diving gear it'll do 47 mph with 4 divers and 2000 lb of diving gear...very pleased, i would recommend and if needed i would buy another."
"KSearched High N Low did some investigation and this product is the best for the price."
"This kit did the trick."
"replaced quadrajet on 82 chevy 350 k30 farm truck, worked great, adjusted idle air screws and and lowered idle speed when at full choke, all worked and fit great."
"Carb came ready to go."
Find Best Price at Amazon

Best Automotive Performance Carburetor Service Tools

Edelbrock 4025 Uni-Syn Carburetor Balancing Instrument
The Edelbrock Uni-Syn Carburetor Balancing Instrument is a precision instrument that provides a visual method of balancing multiple carburetor setups with a high degree of accuracy. Enter your model number to make sure this fits.
Reviews
"It folds down nicely for storing back in it's cheap paper box and bubble wrap."
"The reason I am giving it 4 stars is that it does not say Edelbrock anywhere on the device and the instructions look like a photo copy of an old instruction."
"Unfortunately, I lost my original uni-syn tool that was made in England and I was expecting this Taiwanese part to be made from some ridiculously cheap casting."
"Awesome tool, when you don't have vacuum ports to sync."
"a must when u have to calibrate a carb."
"Used it to sync the carbs on my MG. Now it runs a lot better!"
"Not quite what I had in mind, but I'm sure it will do the job nicely, my friend has one which is slightly larger in diameter and I thought they were all the same."
"The top segment of the indicator arm which connects the vacuum passage to the glass indicator tube, has a seal to the glass but nothing to the passage. Having de-burred and lapped the swivel joint and installed a soft gasket at the top of the indicator tube, the indicator will now just rise at about 1100rpm but not at tickover - 800rpm."
Find Best Price at Amazon

Best Automotive Performance Carburetor Jets

Holley 36-181 Jet Assortment Kit
The jets are made of brass and contained in a plastic case that is designed to keep them separated and easily accessible. Enter your model number to make sure this fits.
Reviews
"It was was what I wanted."
"Great assortment for anyone with a holley carb."
"Excellent if you are looking for an assortment of jets for your Holley or Demon carb like I am using these in."
"Has just about any jet size you need!"
"Nice kit to fine tune your Holley."
Find Best Price at Amazon

Best Automotive Performance Carburetor Gaskets

Holley 37-935 Carburetor Renew Kit
It includes all the necessary gaskets, O-rings, pump diaphragms, needles and seats, and power valves. Comes with gaskets, O-rings, pump diaphragms, needles and seats, and power valves.
Reviews
"Kit has everything you need except instructions."
"Directions sucked, the exploded view was printed way too small and not even for the model I ordered."
"Kit is pretty good but I wish it came with new site windows for the fuel bowls."
"I had 2 bad leaks at the small pump in both primary and secondary bowls from car sitting too long."
"Quality Holley made parts."
"The diagram included in the kit is a joke; find yourself a big clean table and start disassembling while paying particular attention to how you're pulling it apart."
"More gaskets than you may need but better to have more than not enough."
"Had everything I needed (and more) the re build my carb."
Find Best Price at Amazon

Best Automotive Performance Carburetor Caps

Allstar ALL26044 5-1/8" Mounting Diameter 2.5" Tall Machined Deluxe Model Aluminum Carburetor Hat with Sealing O-Ring
Allstar 5-1/8 inch Mounting Diameter 2.5 inch Tall Machined Deluxe Model Aluminum Carburetor Hat with Sealing O-Ring is a deluxe model with a 5-1/8 inch mounting diameter. Carburetor hat is a deluxe model with a 5-1/8 inch mounting diameter.
Reviews
"I bought it to weld on tubing to make a blow through hat, it welded but was some of the worse aluminum i have welded."
"Fits well, looks good, does the job, would be nice if it came with a stud but can't have everything."
"Highly recommend this for those that have a carbureted car."
"Fit is great."
"Fits tight and works as advertised!"
"Great looking and durable.Gets the job done."
"Worked as advertised will last a lifetime."
Find Best Price at Amazon

Best Automotive Performance Carburetor Floats

Holley 116-3 Center Hung Float
The float arm is attached to the float center and is hung or pivoted from the center of the float bowl. Enter your model number to make sure this fits.
Reviews
"Worked great to replace a leaking brass float in a 750 DP."
"the quality of the holey center hung float was excellent and worked flawlessly."
Find Best Price at Amazon

Best Automotive Performance Carburetor Solenoids

Competition Engineering C2047 Lower Coil-Over Shock Mount Kit
The Competition Engineering Lower Coil-Over Shock Mount Kit is designed to be used either by itself or in conjunction with C2048 Upper Coil-Over Shock Mount Kit. Features 1/4 inch housing brackets and 3/16 inch shock brackets.
Reviews
"Quality brackets from a quality company."
"great product for the price."
Find Best Price at Amazon

Best Automotive Performance Carburetor Linkages

Fast 304147 EZ-EFI Cable Mount Kit
The new Fast EZ-EFI cable mount kit is designed to work with the specific needs of the FAST 4150 throttle body found in EZ-EFI systems. Proper tension double spring ensures proper throttle closing and maximizes EZ-EFI performance.
Reviews
"Great product, adjustments and accessories were great!"
"I have the Edelbrock e-street EFI system on this truck and had modified a bracket previously to run the truck."
"still not a great cam marriage to cam linkage part throttle body and part fast bracket."
"Yes I received it and it works perfect."
"made my EZ EFI install that much easier!"
"This bracket just clears with only minor modifixation, I had to file just a touch at the forward carb mounting hole."
Find Best Price at Amazon

Best Automotive Performance Carburetor Hot Idle Compensators

Demon 1950 Street Demon Idle Solenoid Kit
It offers enthusiasts a straight-forward carburetor designed to deliver a stable idle, amazingly crisp throttle response and smooth performance. Enter your model number to make sure this fits.
Reviews
"I wired it to kick on when AC Compressor comes on."
"Prefect fit and works great."
Find Best Price at Amazon

Best Automotive Performance Carburetor Bowl Cover Gaskets

Holley 108832 Blue Fuel Bowl Gasket - Pack of 2
These fuel bowl gaskets are designed to replace worn-out gaskets that may cause a leak and allows fuel line plumbing from either side of the bowl. Enter your model number to make sure this fits.
Reviews
"Worked good, not sure if there made by holley because they werent in the original packing."
"Awesome product, would buy again if needed."
"The gasket works well and fits good.,does not leak and does not stick to the bowl what can I say but you can not go wrong with this Item."
"Works great, fit my Holley 0-4791 carb perfectly."
Find Best Price at Amazon

Best Automotive Performance Power Valves & Gaskets

Holley 125-25 Single-Stage Standard Flow Power Valve
This single-stage standard flow power valve boosts your vehicle's power when pulling heavy loads or at fast speeds. Enter your model number to make sure this fits.
Reviews
"Works as advertised in Holley marine carb."
"Exact part I needed."
"this power valve solved all my issues."
Find Best Price at Amazon

Best Automotive Performance Carburetor Metering Parts

Holley 36-181 Jet Assortment Kit
The jets are made of brass and contained in a plastic case that is designed to keep them separated and easily accessible. Enter your model number to make sure this fits.
Reviews
"It was was what I wanted."
"Great assortment for anyone with a holley carb."
"Excellent if you are looking for an assortment of jets for your Holley or Demon carb like I am using these in."
"Has just about any jet size you need!"
"Nice kit to fine tune your Holley."
Find Best Price at Amazon

Best Automotive Performance Carburetor Rebuild Kits

Holley 37-119 Carburetor Renew Kit
This carburetor renew kit brings marine carburetors back to original specs and like-new condition. Includes O-rings, pump diaphragm, needle and seat, and power valve.
Reviews
"Ordered this rebuild kit a while back."
"Note this is for 4160 series carbs if you have a 4150 series ( a visible metering block between the carb."
"The "step by step" instructions consist of and exploded view that "may not be completely accurate for your carburetor" and instructions to disassemble in general in numerical sequence."
"My step dad is a mechanic.."
"Comes with blue gaskets so you don't have to fight with stupid cork when you do jet changes or power valve later on."
"Ton of parts for every thing under the sun -worked find but boy talk about everything for every carb..."
"Has everything you need with plenty of extra gaskets to rebuild any carb made by holley."
"call Holley before buying this - this absolutely does NOT work with ALL 4160 carbs ... came in a nice box though."
Find Best Price at Amazon

Best Automotive Performance Carburetor Throttle Ball Joints

Holley 20-2 Throttle Ball Assortment
This throttle ball assortment helps to replace worn throttle studs and includes 4 throttle balls with various threads to allow linkage finishing. Enter your model number to make sure this fits.
Reviews
"Great kit."
"I needed a ball for one of my old Holley 94 carburetors."
"But the one I needed was in there and no one else was selling just the one I needed at this set's price point."
"Great works on that carbarator."
"Nice but should be included with a new carb purchase."
Find Best Price at Amazon

Best Automotive Performance Carburetor Return Springs

Lokar SG-6007 Chromed Steel Gas Pedal
It's matching steel brake pads mount with a 1/2 - 20 stud built into the back of the pad. Enter your model number to make sure this fits.
Reviews
"Pedal fit just as it should, easy to install and adjust!"
Find Best Price at Amazon

Best Automotive Performance Carburetor Accelerator Pumps

Holley 0-4412S Model 2300 500 CFM 2-Barrel Manual Choke New Carburetor
It features a manual choke, center hung float bowl, universal throttle lever, all-metal parts, and replaceable jets. Power valve blow-out protection adds trouble free operation.
Reviews
"Was not the right part however easy return so I will recommend these guys."
"Put it on started right up."
"Had to rebuild because it was leaking gas at the base of the carb."
Find Best Price at Amazon

Best Automotive Performance Carburetor Spacers & Adapters

Edelbrock 2696 Four-Hole Square-Bore to Spread-Bore Carburetor Adapter
The Edelbrock Four-Hole Square-Bore to Spread-Bore Carburetor Adapter allows proper installation of carburetor to manifold. Mounts Edelbrock square-bore carburetors to stock Quadrajet and Thermo-Quad manifolds.
Reviews
"Bought this because another website said you can also use this to mount a spread bore (Quadrajet) to a square bore intake."
"The gaskets sealed well, but if you're planning to install this exactly as I did, you'll want to pair it up with the ICT Billet heat riser choke blockoff plate, and possibly an EGR delete blockoff plate."
"The product was fine, but the thread holes were drilled a bit "crooked.""
"As it was, I used the vacuum port on the back of the Edelbrock carb to hook my power brakes up, just like the original QuadraJet."
"I bought this adapter to fit the reverse from its intention - a spread-bore carburetor onto a square-bore intake."
"Edelbrock is a very good name and the quality is good even though it's made in China."
"Works perfectly as an adapter from square bore carb/throttle body to spread bore intake."
"Didn't work for my application, but looked to be excellent Edelbrock quality."
Find Best Price at Amazon

Best Automotive Performance Carburetor Needle & Seat Assemblies

Edelbrock 1465 Carburetor Needle and Seat - Pair
The weight is approximately 0.03 pounds and it is not adjustable and spring loaded. Includes a pair of spring loaded needles and seats.
Reviews
"No matter how I set the floats it always starved the carb for fuel."
"this really helped to stop my jeep from flooding."
"The (2) long mixture needles need to go into the base with a little jiggling so they must be loosened at the top first."
"all parts were there..seemed to go in just fine, Thanks."
"I bought this kit to try to keep my Edelbrock carb from stalling around corners."
"Don't know if it was the spring loaded needles or just resetting the floats correctly, but my 37-year-old plow truck has stopped stalling while going forward up steep inclines."
"Why the heck didnt edelbrock just install these from the factory on all their carbs?"
"I put these in all my truck carbs."
Find Best Price at Amazon

Best Automotive Performance Carburetor Governor Diaphragms

Holley 20-85 Cover-Diaphragm Housing
The Holley cover diaphragm housing is designed to balance secondary operations on a 1x4 barrel application. Enter your model number to make sure this fits.
Find Best Price at Amazon

Best Automotive Performance Carburetor Self-Tapping Screws

Edelbrock 8016 Ball End Throttle Level Stud
The Edelbrock Ball End Throttle Level Studs are designed to hook cables up to your carburetor. Available in variety of styles for throttle cables, cruise control cables and transmission kick-down cables.
Reviews
"Does what it's supposed to!"
"Arrived on time and as expected."
Find Best Price at Amazon

Best Automotive Performance Carburetor Air Bleed Valve O-Rings

Demon 200082 10/32" Carburetor Air Bleed - 10 Piece
Air bleeds affect carburetor fuel delivery throughout the rpm range. Enter your model number to make sure this fits.
Find Best Price at Amazon

Best Automotive Performance Carburetor Decel Valve Diaphragms

Holley 135-9 GFLT Accelerator Pump Diaphragm
This accelerator pump diaphragm has a GFLT style and is used to replace the existing worn-out part that is usually underneath the front of the carburetor. Enter your model number to make sure this fits.
Reviews
"works great with oxygenated fuels a must have for fuels at the pump today."
"Great replacement for Holley 4224 660 cfm Center squirter."
"Just what I needed to fix my Holley carb."
Find Best Price at Amazon

Best Automotive Performance Fuel Inlet Repair Fittings & Gaskets

Edelbrock 8089 Carburetor Inlet Fitting
The Edelbrock Carburetor Inlet Fittings are accessories which are used to install and tune Edelbrock carburetors. Fitting can be rotated 360 degrees and allows to aim your fuel inlet towards the front or rear of the carburetor.
Reviews
"This 8089 inlet fitting for my Edelbrock Performer 500cfm 4bbl carburetor along with the 2" high Edelbrock 1218 air filter element gave me the hood clearance I needed after installing the Performer intake manifold (which is a higher rise than the stock manifold)."
"The pickup runs well with the new carburetor without any of the problems the old carburetor was giving."
"This fitting seems to be of high quality and works great with my drop air cleaner base."
"Perfect solution to clearance issues caused by my addition of a 'Dropped' Base Air Cleaner on a 600CFM Edelbrock 4-Barrel Carb."
"Edelbrock should of made this item, 8126, years ago."
"Moved my fuel out of the way.....great fit!"
"Just what I needed for air cleaner clearance."
Find Best Price at Amazon