Best Automotive Performance Electrical System Switches
Designed using the latest computer modeling software, Daystar Dash Panels have a precise fit and a texture that matches the OE dash components. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Since this information should have been included in the description or in the pictures, I have decided to do the leg work for Daystar and post a picture of the box you will receive."
"2 scenarios: if I left the bottom clip out of its retainer 'cradle/bar', the top clips lined up, but it wasn’t 'in' 100%, and it would 'unclip' at the top after about 2 minutes of driving. if I clipped in the bottom part, the top male clips wouldn't line up vertically with the female slots, and it wouldn’t install ‘in’ all the way. I compared the factory piece to this unit side by side and the bottom clip is off ever so slightly, just enough to not let the top clips line up. Solution: I took a hacksaw blade (no handle) and carved out a few mm from the bottom clip, and it lowered it just enough to get the top clips to line up and then the top clips went in SNUGLY (even though I haven't driven it after that to see if it stayed in)."
"The original panel that was taken out had four clips."
"I have not taken it off-road since install, so I am not sure if this panel is going to drop down."
"I have this installed on a 2013 JKU with a Switch-Pros switch panel mounted to it."
"fit is a bit better than some others say, but not perfect, do need to add some clearance on the bottom cleats."
"Make sure you review which JK models it's recommended for and make sure you keep the clips from the stock (it's very difficult to find replacements...I found that out the hard way when I threw the clips away with the stock panel)."
"4 switches and a USB charge insert, carefully cut Ouicksell, filed, custom built wire harnesses, (Former Avionics Tech) painted and then installed.... fit couldn't be worse!"
Daystar 20 Amp Red Light Rocker Switch Kits are designed to connect and disconnect an electrical circuit at will. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The plastic "holders" on the back have shim grooves on them so it grabs like a hook yet it is still easy to remove from the panel."
"tactile button, but does not fit honda cr-v 2008. also only lights up when it is turned on."
"Nice switch, fits perfectly in the spot on my rtv-x900."
"I use the switches to run led lights bars, winches, and sprayers."
"I used this to replace the junky switch in the KAWELL® 2 Leg Wiring Harness Include Switch Kit Support 180W LED Light Wiring Harness and Switch."
"I used this as the switch for my KC Highliters, easy to install and very sturdy."
"Item worked flawless for about a year then the cover broke off the switch."
"Second, the light uses the same power terminal as the controlled circuit meaning you can't use it to break the ground wire."
Battery DisconnectBig SwitchRotary SwitchPanel Mount250 ampAluminum Extension/Bracket12-24VKit. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"However, I setup the switch to be a master push off for the power to some 12DV equipment inside a trailer enclosure."
"If you are installing this then you most likely have or have access to tools to cut the rod and tap new threads if you shortened it."
Best Automotive Performance Electrical System Relays
12 volt 20/40 amperes SPDT relay with bracket. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"This relay is the best one I have ever used... Do yourself a favor and get the wiring harness that will totally seal the connection... Be careful when using the wiring harness... look at the size of wiring that will connect to the relay from what you are controlling ... the stock wiring configuration from the factory may need changed.. ex: the blue wiring used for control may need to be changed to a different pin... No big deal pop the wire out and snap it into the correct one... you may need to swap a couple ones... Buy this system you wont be sorry !!!"
"I would highly recommend some anti-seize on the gasket as separating the relay from the housing painful to say the least."
"Had to modify the installation clip to attach it to the engine."
"Great relays."
"It turned out that one of the relays were bad and they BOTH need to be good in order for your tilt and trim to work properly."
"If you don't need the weatherproof option save some $ and go for the cheaper Hella version, but if you do need waterproof this is the one and pair it with part# H84709001 for a perfect match, as you don't want to use this one on it's own."
"I bought this item because on the listed picture it shows made in USA and also there's a question answered saying they are."