Koncocoo

Best Automotive Performance Hoses

Allstar Performance ALL18300 3/16" Rubber Cushioned Aluminum Line Clamp, (Pack of 10)
Size: 3/16in |. Style: 10 Pack. Enter your model number to make sure this fits.
Reviews
"I've got some that have lived under off road vehicles and horse trailers for years in mud, water, ozone, desert air etc. Cheaper quality clamps sometimes won't fit anything larger than about a #8 self tapping screw and even then the tab is so short the screw head won't fit well."
"I used these to run new brake lines, wiring, and fuel lines on my old Studebaker Lark."
"I bought a cheap windshield that came with plastic clamps..."
"Keeps the brake lines away from frame so dirt and stuff doesn't collect and cause problems down the road."
"I used these to attach copper-nickel brake line to the bottom of my Mazda 626 since the old attahment points were too rusty to be useful."
"I used these to "over-secure" brake line in a old vehicle that i replaced the rear brake lines in."
"I would recommend these for hard line installation only as the bands do tend to pinch pretty hard."
"Perfect for holding air lines brake lines and wires to the shell of the car just make sure you know the size of what you wanna hold down cause some of these sizes are smaller than I thought."
Find Best Price at Amazon
Derale 13017 Transmission/Engine Oil Hose
Derale's high temperature, high pressure OE-spec transmission or engine oil hose has an inside diameter of 3/8 inch and comes in pre-cut length of 25 feet. Enter your model number to make sure this fits.
Reviews
"I used this hose to add a Magnefine transmission fluid filter and a B&M oil cooler on my vehicle."
"Perfect hose for oil transfer!"
"Working great so far for a pre-oiling system."
"Great hose very high quality and useability."
"I have bought other brands and they were very thin wall and not up to the quality of this hose."
"I bought the 3/8 hose."
"Goodyear hose in the box, will buy again!!"
Find Best Price at Amazon
HPS (SSTC-57-65) 57mm - 65mm Stainless Steel T-Bolt Hose Clamp
HPS stainless steel t-bolt band clamps are the perfect choice for medium and heavy-duty applications.
Reviews
"It's a well made clamp."
"These clamp things, so they get 5 stars."
"Broke the stock clamp the connects the intake hose to the EGR valve."
"Nice clamp - needed for silicon hose for turbo."
"I don't have any doubt this will keep a tight seal on my turbo piping for a long time."
"The smallest radiator hose this will work on is 2.5 inch."
Find Best Price at Amazon

Best Automotive Performance Air Cleaner Intake Hoses

Airaid 510-934 M.I.T. Modular Intake Tube
AirAid Modular Intake Tubes provide a smooth, unrestricted path which increases airflow up to 400 CFM. Enter your model number to make sure this fits.
Reviews
"Well once you get it on it seems to work good."
"Super easy installation."
"Definitely more intake roar."
"I was tinkering with idea of a full cold air intake, but after reading several reviews, I went with this."
"Makes my engine looks a lot nicer and sound is much improved."
"I purchased this Airaid tube to replace my cracked OEM intake tube on my 1999 Toyota Tacoma Prerunner V6."
"It definitely cleans up the engine bay and has a throaty acceleration sound."
"Cleared up some room in my engine bay and gave the motor a good sound, not to loud like i was worried about."
Find Best Price at Amazon

Best Automotive Performance Braided Hoses & Covers

Earl's 310010 Auto-Flex HTE Stainless Steel Braid Protected -10AN by 10' Synthetic Rubber Hose
The hose is finished with a full coverage stainless steel braid which is bonded to the reinforced HTE liner. Inner liner is constructed from Temprel synthetic rubber tube that provides a clean, fast and constant flow.
Find Best Price at Amazon

Best Automotive Performance Bypass Hoses

Dorman Help! 56390 Coolant Bypass Seal
Motormite Engine Coolant Water Bypass Gasket 56390. Enter your model number to make sure this fits.
Reviews
"Seam to be good quality but they cam in the Fel-Pro head gasket kit so I did not use."
"Fit good and did the trick."
"Served the purpose."
"Like the oem bypass seals."
Find Best Price at Amazon

Best Automotive Performance Hose Clamps & Sleeving

Allstar Performance ALL18300 3/16" Rubber Cushioned Aluminum Line Clamp, (Pack of 10)
Size: 3/16in |. Style: 10 Pack. Enter your model number to make sure this fits.
Reviews
"I've got some that have lived under off road vehicles and horse trailers for years in mud, water, ozone, desert air etc. Cheaper quality clamps sometimes won't fit anything larger than about a #8 self tapping screw and even then the tab is so short the screw head won't fit well."
"I used these to run new brake lines, wiring, and fuel lines on my old Studebaker Lark."
"I bought a cheap windshield that came with plastic clamps..."
"Keeps the brake lines away from frame so dirt and stuff doesn't collect and cause problems down the road."
"I used these to attach copper-nickel brake line to the bottom of my Mazda 626 since the old attahment points were too rusty to be useful."
"I used these to "over-secure" brake line in a old vehicle that i replaced the rear brake lines in."
"I would recommend these for hard line installation only as the bands do tend to pinch pretty hard."
"Perfect for holding air lines brake lines and wires to the shell of the car just make sure you know the size of what you wanna hold down cause some of these sizes are smaller than I thought."
Find Best Price at Amazon

Best Automotive Performance Connector Hoses

Mishimoto MMCP-2530BK Black 2.5" to 3" Transition Coupler
Length: 3” Thickness: 4mm ID: 2.5” OD: 3.0” ID: 2.8” OD: 3.4”.
Reviews
"For some reason, the surface is a little sticky, which means that even when I put them on the desk, dust and dirt particles clung on and wouldn't remove easily."
"This is a single-ply coupler suitable for normal boost street turbo intercooler applications."
"Great product , fast shipping."
"AWSOME!!!"
"Works as described on my Evo X intercooler piping."
"Great product, fast shipping."
"The part seems to be good quality but I received a 2.25" to 2.5" coupler."
Find Best Price at Amazon

Best Automotive Performance Hose Fittings & Adapters

Vibrant 10289 1/8" NPT Oil Restrictor Fitting
Vibrant Performance oil system products are designed and manufactured to the utmost standard in quality and reliability and have earned the trust of industry professionals throughout the world. Enter your model number to make sure this fits.
Reviews
"Made a bypass filter system for the truck and it was nice to have the option of .030 or .035 size holes."
"Turbo was getting way too much oil, this is perfect to fine tune the oil pressure through the feed line."
"Fixed my oil consumption issue."
"Very cool but no orifice size info…not so cool."
"Had too much oil pressure going into my turbo causing oil to pass through the seals at WOT."
Find Best Price at Amazon

Best Automotive Performance Flex Hoses

Russell 632060 ProFlex -6AN Stainless Steel Braided Hose - 6 Feet
The Edelbrock/Russell 6 Feet Pro-Flex Pre-Packaged Stainless Steel Braided Hose is constructed with a stainless steel outer braid that resists abrasion and corrosion. 308 stainless wire braid outside construction provides durability and resists heat.
Reviews
"just what I was looking for."
"just as advertised with quick delivery."
"This hose can stop BULLETS!!!"
"It is an excellent product."
"excellent product and quality."
"This product was very easy to install and works well with the russell fittings."
Find Best Price at Amazon

Best Automotive Performance Fresh Air Duct Hoses

Mishimoto MMHOSE-D3 3" x 12' Heat Resistant Silicone Ducting
Mishimoto has developed a line of heat resistant silicone ducting, available in four sizes to fit a variety of vehicles and uses. Cool vital locations such as the brakes, air intake, or even the driving compartment of race vehicles.
Reviews
"Used it for intercooler shroud."
Find Best Price at Amazon

Best Automotive Performance Fuel Hoses

Edelbrock 8126 Chrome Fuel Line
The Edelbrock Fuel Line is specifically designed for Edelbrock square-bore carburetors. Does not work with OEM (Original Equipment Manufacturer) fuel pumps.
Reviews
"I was able to bend the tube slightly before the barb fitting to make it fit but it was disappointing that it didn't fit outright."
"This solved my fuel line hook up problem for the rebuild I just did on the boat I just purchased."
"this part is a definate need when installing a edelbrock air cleaner on the carb it allows the fuel line to be down out of the way of botth of the air cleaner and gives a much cleaner looking install."
"The fittings are a bit lightweight so I could see how it is easy to over tighten."
"Solved clearance issues with air cleaner and it looks right."
"Edelbrock should of made these years ago."
"I had this on my 63 chev since December , it worked and looked fine until 3 weeks ago , I developed a gas leak and assumed the carb was flooding ."
Find Best Price at Amazon

Best Automotive Performance Fuel Filler Hoses

Crown Automotive 5463803ST Fuel Filler Neck
Fuel Neck Protector. Enter your model number to make sure this fits.
Reviews
"Soils and sturdy."
Find Best Price at Amazon

Best Automotive Performance Heater Hoses

HPS 57-1338-RED XJ Silicone Radiator and Heater Hose Kit Coolant
HPS silicone Radiator + Heater hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Ideal replacement or performance upgrade for the OEM rubber hoses; Race proven design ensure the long lasting quality over the stock rubber hoses.
Reviews
"This comes with only one size of heater hose even though the Cherokee requires 2 different sizes took a while and hot water soak to get it to push on and really stretched out the hose."
Find Best Price at Amazon

Best Automotive Performance Pre-Heater Hoses

Spectre Performance 3008B Magna-Braid Heater Hose
Spectre’s hose sleeving fits hoses from 3/4 to 1-1/4 inches in outside diameter, and is made from #304 grade braided stainless steel. Enter your model number to make sure this fits.
Reviews
"It may be application specific, but in my case, there's no way the Magna-Clamp hose end was going to allow enough expansion to reattach the heater hose to its fitting with that tape on there."
"If you want to spend 8 hours tracing tiny wires, maybe you could pull it in like a snagged sweater. I wasn't covering a hose though, I was using it as a mesh strainer for a home brew kettle."
"Well no more, I used the stainless braided hose cover to cover the propane grill hose (the high pressure variety, no regulator) and this hose cover will slide over the smaller end and the steel braid is apparently enough to keep the tree rats from destroying yet another one."
"just what I needed going to work prefect."
"As others have stated the appearance of this product isn't all that great but I didn't care."
"This product looks great and it's easy to install."
Find Best Price at Amazon

Best Automotive Performance Radiator Hoses

Mishimoto MMHOSE-WRX-01BL Blue Silicone Hose Kit
Constructed with high grade silicone and heat-resistant embedded fibers. Maximum Temperature: 330 F. Inner Diameter: Hose 1: 1.5", Hose 2: 1.5".
Reviews
"When under heat, the hose expanded JUUUUUST enough to start getting clipped by the radiator fan blade."
"I would recommend an additional Water Temperature Sensor to monitor the engine coolant while the car is off and cooling down."
"Hoses just needed to be trimmed a bit to fit."
"The hoses are great the only thing is I ordered blue and got black but I needed them to get to work so I didn't send them back."
"Installed new hoses with mishimoto radiator."
"This hose mixed with the Mishimoto MMRAD-WRX-01 in my 05 STI, the hose is really close to alternator, but it doesn't touch."
"I did not have to trim any part to fit at all."
Find Best Price at Amazon

Best Automotive Performance Vacuum Hoses

HPS HTSVH6-BLKx5 Black 5' Length High Temperature Silicone Vacuum Tubing Hose (60 psi Maxium Pressure, 1/4" ID)
Heavy wall design gives it the ability to handle extreme pressure. Ultra flexible & Excellent tensile strength.. Key Features: Made of Premium grade Silicone. Heavy wall design gives it the ability to handle extreme pressure. Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
Reviews
"Exact sizing as advertised."
"Perfect - I fitted it as a additional boost pipe for a boost guage along with a brass T - http://a.co/aLoaEec."
"Item came as described."
"Exactly as represented."
"Works well, snug fit."
"Worked great with our wooden pellet stove."
Find Best Price at Amazon