Koncocoo

Best Automotive Replacement Anti-Lock Brake Sensors

Motorcraft SW6350 Brake Repair Kit
Motorcraft repair kit for speed sensor. Fit to the master cylinder for repair of recalled sensor.
Reviews
"Then Google said to look at the brake pressure switch on the brake master cylinder and check for the presence of brake fluid in the electrical connector. I used some electrical contact cleaner spray in the electrical connector to get rid of any residual brake fluid in there."
"Can confirm this is the correct part for 2002-2005 Ford Explorer XLT (not sure about the other editions and versions."
"(1995–2001) I was having a hard time figuring out why my cruise control would flash on and off and after reading around and checking the recall list (GET THIS REPLACED IMMEDIATELY) I decided to go for it and buy it."
"It is recommended that you fill the sensor while upside-down with brake fluid to remove air in the sensor, then remove the old sensor. Since I had the new sensor I put it in, but the old sensor may have been good - unsure. As an a side note, The cable that I did not use had the correct connector that I needed to repair a 98 explorer windshield washer. Spliced one connector from this kit into the 98 wiring harness and now my windshield washer works on the 98."
"Replacement for the switch on a 2001 Ford Ranger..."
"My F150 -1998 vehicle was recalled years go and the cruise control brake harness was replaced. Recently I noticed smoke billowing from the driver side wheel well and discovered brake fluid had dripped from the master cylinder cruise sending switch onto the disc brake rotor."
"After reading online forums where others had experienced similar problems, the consensus solution seemed to be replacing the brake pressure switch/sensor."
"I also realized that the horn is part of the same plug as the cruise control, so when that was unplugged, the horn was unplugged too."
Find Best Price at Amazon
Dorman 970-024 ABS Sensor
Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. Enter your model number to make sure this fits.
Reviews
"Like the factor part, this part also comes with a stamp metal shielding to protect the sensor while some other brands don't."
"Perfect no issues, it was easy to replace, thanks to "jimthecarguy" in you tube who made a video named "How to diagnose and replace a rear abs sensor on a Dodge", the man gives an easy and complete explanation and walkthrough on the troubleshooting and installation of this sensor."
"It fixed my speedometer problem."
"This would be one of the easiest project I've had to do on my truck as in taking and replacing a part."
"Slightly different than OEM for a 98 Dodge Ram 1500 Quad cab but it resolved the problem of the ABS and BRAKE light staying on and the speedometer not working."
"great sensor from a reputable aftermarket dealer.Had to redo the axle in my 01 dodge ,duen to explodeing the spider gears.looked around and found this sensor at a decent price.could not be happier.lights are out and is a decent quiliy.that is cheaper then parts houses."
"It fit but has the orientation of the plug 180 Degrees out for my 1998 dodge."
"These sensors fail regularly and are expensive at the parts store."
Find Best Price at Amazon
ACDelco FW293 GM Original Equipment Front Wheel Hub and Bearing Assembly with Wheel Speed Sensor and Wheel Studs
High quality materials ensure long service life.
Reviews
"Bearing was noisy and ABS signal was weak and I had problems with it for 2 years."
"The original hubs looked very worn out and each side had that low hum when turning the wheel slightly to either side."
"Symptoms of a bad transducer : - ABS warning light on constantly. - brake warning light on constantly. - low tire pressure light on. - when first starting to fail, you can feel abs braking activating even if going 1 mph in normal dry conditions with no reason for it to activate."
"It took my mechanic an hour to install this hub which included checking the sensor wiring and removal, cleanup of the hub mounting area."
"Also came with ABS sensor and ABS sensor retaining clip (glad for that because old clip was broken)."
"I ordered this name wheel bearing after seeing good reviews on Impala forums and a great price."
"After approximately 8-9 months and maybe 10,000 miles (could have been sooner, I don't always drive the car), the hub started making a whining/whirring noise around 15 mph."
"I didn't however because honestly I figured I would just have to pay for the shipping back & it would end up costing more $ for parts I didn't want & honestly I needed wheel bearings that badly. (yelling @ you Amazon!...update this listings description) I will never order car parts here again because obviously it's too much to ask that I get what I ordered from here.😤 In the picture I submitted the hub on the left is what I received & the hub on the right is the original hub that came with my car (i.e. AC Delco), these are very obviously not the same part."
Find Best Price at Amazon

Best Automotive Replacement Anti-Lock Brake Speed Sensors

Motorcraft SW6350 Brake Repair Kit
Motorcraft repair kit for speed sensor. Fit to the master cylinder for repair of recalled sensor.
Reviews
"Then Google said to look at the brake pressure switch on the brake master cylinder and check for the presence of brake fluid in the electrical connector. I used some electrical contact cleaner spray in the electrical connector to get rid of any residual brake fluid in there."
"Can confirm this is the correct part for 2002-2005 Ford Explorer XLT (not sure about the other editions and versions."
"(1995–2001) I was having a hard time figuring out why my cruise control would flash on and off and after reading around and checking the recall list (GET THIS REPLACED IMMEDIATELY) I decided to go for it and buy it."
"It is recommended that you fill the sensor while upside-down with brake fluid to remove air in the sensor, then remove the old sensor. Since I had the new sensor I put it in, but the old sensor may have been good - unsure. As an a side note, The cable that I did not use had the correct connector that I needed to repair a 98 explorer windshield washer. Spliced one connector from this kit into the 98 wiring harness and now my windshield washer works on the 98."
"Replacement for the switch on a 2001 Ford Ranger..."
"My F150 -1998 vehicle was recalled years go and the cruise control brake harness was replaced. Recently I noticed smoke billowing from the driver side wheel well and discovered brake fluid had dripped from the master cylinder cruise sending switch onto the disc brake rotor."
"After reading online forums where others had experienced similar problems, the consensus solution seemed to be replacing the brake pressure switch/sensor."
"I also realized that the horn is part of the same plug as the cruise control, so when that was unplugged, the horn was unplugged too."
Find Best Price at Amazon

Best Automotive Replacement Anti-Lock Brake Return Hoses

25 Ft. Roll / Coil of 3/16" Copper Nickel Brake Line Tubing
This Brake Line Tubing is the best on the market for extremely easy bending and flaring. Many local parts stores rent out flaring tools free.
Reviews
"Bought this to make some replacement brake lines for my daughter's 2005 Cavalier, which had rusted out and started leaking."
"On advice from a friend, I tried this brake tube."
"I used this brake line to replace a rusted brake line on my 2003 Dodge Dakota."
"This product is amazing having never done brake lines before."
"If your new to making brake lines this stuff is very forgiving to the novice."
"I hate replacing brake lines because it's such a pain to run them and maintain the O.E."
"Will be buying some more to replace more lines in the future, thanks to living in a state that salts thier roads a lot in the winter."
"The first step in the process is to use a piece of twine to measure the length needed, then flare, then bend, then "tweak", then install, and final "tweak"."
Find Best Price at Amazon

Best Automotive Replacement Anti-Lock Brake Pressure Hoses

ACDelco 25698848 GM Original Equipment Purple Brake Pressure Modulator Valve Front Hydraulic Pipe Assembly
ACDelco GM Original Equipment Brake Hydraulic Lines are quality reinforced lines that carry fluid within the brake system, and are GM-recommended replacements for your vehicle's original components. Manufactured with GM Original Equipment specification for fit, form, and function.
Reviews
"Very good quality, fit was perfect."
"worked great..perfect fit, great price!"
"This part fit my vehicle as described."
"Exact fit for our 2000 Buick Le sabre."
Find Best Price at Amazon

Best Automotive Replacement Anti-Lock Brake Control Modules

Dorman 599-712 ABS Control Module
Dorman 599-712 Abs Cntrl Module - Remanufactured. Enter your model number to make sure this fits.
Reviews
"Be sure to watch the you tube video "How to remove and replace a Kelsey Hayes 325 ABS module" especially in order to release the GM connectors."
Find Best Price at Amazon

Best Automotive Replacement Anti-Lock Brake Modulator Valves

ACDelco 19122463 GM Original Equipment ABS Pressure Modulator Valve
ACDelco GM Original Equipment ABS Modulator Valve controls the flow of brake fluid into your brakes, providing the critical anti-lock feature. GM-recommended replacement part for your GM vehicle’s original factory component.
Reviews
"Excellent price and works as desired."
"Replacement was just as expected."
"Thank you. Was the rihgt part thanks."
"came on time exactly as discribed."
"Functions as well as the original and saved me money and time trying to find this part for my non Denali GMC Yukon."
"fits and worked perfectly."
Find Best Price at Amazon

Best Automotive Replacement Anti-Lock Brake Actuator Assemblies

ACDelco 15-72971 GM Original Equipment Temperature Mode Valve Actuator Assembly
ACDelco GM Original Equipment A/C Vacuum Actuators are a pneumatic servo mounted on the HVAC housing that actuate or move the HVAC doors or valves. Restore HVAC functions caused by leaking vacuum actuator.
Reviews
"Fixed the climate control in my Corvette so I could have AC in the summer."
"This fixed the "hot air" problem on my 2004 Suburban, and its GM Original!!"
"worked like a champ in my 2004 Tahoe."
"part works and restored my ac/heat function."
"2004 Escalade would cool great then the drivers side would begin to blow heat,passengers side stayed cool."
"Worked perfect."
"Product works great so far, weighed less then the original and didnt say ac delco anywhere on it or the sticker so I'm not sure who really made it, packaging was terrible, it was just loose thrown into an envelope."
Find Best Price at Amazon

Best Automotive Replacement Anti-Lock Brake Pump & Motor Assemblies

ACDelco 15743820 GM Original Equipment Parking Brake Pump with Motor
ACDelco GM Original Equipment Parking Brake Pump Motor is the GM recommended replacement for your vehicle’s original components. GM-recommended replacement part for your GM vehicle’s original factory component.
Reviews
"Allways a great deal at Amazon."
Find Best Price at Amazon