Best Automotive Replacement Fuel Tank Filler Necks
Ford Ranger 1990 - 1997 (except Flareside, Stepside, and Splash models). Mazda B4000 1994 - 1997. Mazda B3000 1994 - 1996. Mazda B2300 1994 - 1997. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Installation was very easy and strait forward once the truck bed is removed. Removing the truck bed is pretty much required to install this and it can be a huge pain in the butt."
"The screw holes did not line up for the new hose to all of the existing holes on the truck bed side and we ended up with the filler neck installed at a twisted angle (meaning you have to hold the filler nozzle sideways when gassing up --kinda like a thug holding a 9mm sideways in a movie)."
"It's not the best thing when you start to pump gas and hear it splashing upon the ground underneath the car. I managed it without removing the bed but I would suggest connecting it to the gas tank first before the body."
"Biggest tip is make sure you have the right bed size selected. Also it's worth your time if you pull the bed to change the O ring/Gasket on the fuel tank that this connects to for Evap."
"The product itself fits and works well."
"Perfect , OEM quality part the whole inchalada .Thank you for this quality part I saved hundreds of dollars."
"It fit fine without having to modify or force anything."
"It also was very helpful to take the bed loose and slide it back a few feet to get the hose attached to the gas tank."
Brand New Fuel Gas Tank Filler Neck Tube Pipe. Does Not Fit Flareside (Splash) Models. Fits 1990-1997 Ford Ranger (Except Splash). Fits 1994-1997 Mazda B2300 (Except Splash). Fits 1994-1996 Mazda B3000 (Except Splash). Fits 1994-1997 Mazda B4000 (Except Splash). Replaces Ford F47Z9034P, AL5Z9034A, AL5Z9034C, F47Z9034, ZZM042210C. Black Powder Coated Steel To Prevent Future Rust.
Reviews
Find Best Price at Amazon"Bought it used a couple of months ago and the previous owner warned me about filling up the truck all the way, that the nozzle would not shut off, Tried to do it anyway and lo and behold, nozzle did turn off but only after a lot of gasoline spewed on the ground.....what a knucklehead eh? Recommendations, there was a APDTY sticker on the small hose that goes down into the tank.....take it off so it is not clogging up your fuel filter. You can buy just the big hose part that normally goes bad, but you might as well get the whole assembly, fits perfectly."
"The overflow wasn't fuel rated hose material however the inner fill hose still looks new."
"The gas tank filler hose on my 97 XLT Ranger had a crack in it by the neck on the tank."
"This fit perfectly on my 1997 Mazda B4000."
"As advertised."
"Great deal for the price and fast delivery."
"Installed 3 months ago still holding, I'm happy."
"Just as advertised."
Aftermarket Replacement for Ford Part Number: 4L3Z9927936BA, his Is the fuel filler neck housing it includes the hinge. Made to fit and replace your old OEM part, actual testing done for your vehicle fitment to ensure perfect fit.
Reviews
Find Best Price at Amazon"The company called me once in march and said they would send a new part, and that was the last I heard from them until a few days ago. The fuel door is still not tight against the fender, but its neutral point is touching the body, so it at least looks correct. Reinstall can be tricky, its a tight fit so be sure to reach under the wheel well and MOVE THE FUEL FILLER SPOUT out of the way or you wont ever get it inserted back into the fender."
"Original equipment on my 05 Ford 4WD detonated, door fell off, spring dropped out of gear."
"Also watch when you remove the old and insert the new; they're very difficult to get in at the right angle, and if you don't pay attention, you'll end up scratching your finish as you rotate it this way and that."
"Although a bit tricky to install, just watch one of the many youtube videos and it will go on without incident."
"Fast deliver and as defined."
"It can be a little tricky to remove the broken one and install the new one but a little patience and watching the howto videos is really all you need."
"But after it scored it everything fit back great."
Best Automotive Replacement Fuel Tanks
For use when tuning a motorcycle with the gas tank removed. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Filled this tank to about where it reaches it's full diameter, put the cap on it as tight as I could (while trying to tighten it down it would click/pop and loosen up repeatedly), laid it on it's side and fuel went everywhere as I was expecting."
"The size does not restrict the flow of fuel as the bike will not use more then it can deliver at idle or around idle anyway, but will not fit the bikes fuel line and probably leak."
"I'm a motorcycle machanic, when I need to make the carburetors work together,(Carburetor synchronization), I have to remove the gas tank. to get a better stand point on the operation."
"Works great for diagnosing tank related issues or adjusting carbs that need the tank removed."
"This is advertised as a "Motorcycle Shop Auxiliary Gas Fuel Tank Tool" but I don't know of any modern motorcycles that use an 1/8" fuel line!! Otherwise you should advertise it as a "chainsaw Shop Auxiliary Gas Fuel Tank Tool", because that is about the only thing I know of that uses a 1/8" fuel line."
"What am I supposed to do with a 1/8" fuel line?"
"This will not work with many QD fuel lines on modern bikes."
"I was sdissapointed, that for the money spent, I had to buy a new 1/4in to 1/4in barbed ball valve to make it what the description says it is."
Best Automotive Replacement Fuel Tank Selector Valves
FUEL VALVE 6 PORT6 PORT FUEL VALVESix-port fuel valves are used where 2 tanks supply a single engine, and a return to each supply tank is required. Anything after 4:00 will ship the following business day. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Good quality fast shipping."
"The valve is tight and right and the quality is very good."
Best Automotive Replacement Fuel Tank Lock Rings & Seals
Channel design on body allows the legs to adjust to fit a wide range of applications and keeps the drive centered. Works on the new smaller GM serrated rings and traditional rings.
Reviews
Find Best Price at Amazon"Getting the ring back on was also more difficult than I thought it would be since the fuel module on my tank is spring-loaded and the nylon threads can flex without fully engaging."
"I was hoping to avoid buying the $180 Nissan Murano fuel tank cap tool by getting this instead."
"I purchased this over other cheaper designs because it allows removal of rings that are mounted deeper below the floor level (reading reviews of the cheaper designs with a fixed top bar, a common complaint was the arms weren't long enough to reach the rings)."
"With that in mind, this tool made the job easier but the price still seems a bit steep."
"Also, this tool did not mar the ridges on the locking ring, whereas the pliers most definitely did."
"I wasn't sure about the hex drive compared to a 3/8" square drive but after using the tool I find the hex drive design works great."
"I spent over an hour trying to get my lock ring back on, and cut my hands up in the process."
"Worked great on my 7th gen Honda Civic."