Best Powersorts Forks & Accessories
The Titan clamp-on pallet forks feature a simple design which slides over the cutting edge of your bucket and clamps down, locking the unit in place.
Reviews
Find Best Price at Amazon"I would certainly recommend these forks to anyone needing to lift pallets or other items that fit on them. I would have preferred that they were tapered like in the photo to help avoid stabbing product on the pallet (with the pointed part LOWER instead of higher)."
"the forks are boxed and heavy steel."
"I realize that maybe the shipping cost is cheaper by boxing them together and of course they always arrive at the same time.....just a thought!"
"My one and only problem, which isn't a problem with the forks, and having used fork lifts, is it's much more difficult to see where the forks are on a tractor bucket."
"My husband has been using these for over a year now for mainly for moving whole logs with his tractor."
"They are pretty solid."
"Very well made."
"I have a JD 2210 compact tractor it does not have the power able to use these forks."
Extracts dirt and debris trapped between fork seal and tube.
Reviews
Find Best Price at Amazon"High price for a thin piece of plastic, but compared to the number of hours and money I'd waste replacing good seals on a full fairing bike, totally worth it."
"There was quite a bit of friction and little to no leverage to slide the seal mate around the seal."
"I wanted to see if they would be a quick fix and saw that this item could be used to clean them and get small bits of sand and road grime out of them by slipping this tool up into the fork and cleaning out the seals unfortunately it didn't stop the leak but they are not leaking as bad as they were before using this tool."
"I had an FZ8 with weeping seals."
"The negative reviews complaining about the price don't understand you are paying for a solution, not a cheap piece of plastic."
"Considering the cost of having new fork seals installed, I figured this thing for less than $10 was worth the experiment."
"I have an old Honda that was leaking fork oil like mad, and after a few treatments with this, the leak completely disappeared."
"I was going to pay $300 plus to get this fixed so this little piece of plastic saved my big bucks."
The brackets were designed with anti-slip teeth and rubber mats,so the led light bar can be firmly fixed without scratching the car. Package Including: 2 x stainless steel brackets (No Including Lamp). 2 x hex Allen wrench. Package Includes：2 x stainless steel brackets (No Including Lamp), 2 x hex Allen wrench.
Reviews
Find Best Price at Amazon"I bought a cheapo set of auxbeam 15watt lights to use as reverse lights on my truck."
"Mine came very well packaged and protected, but it had a large scratch on the surface paint."
"For no fault of the product its a bit flimsy on my vehicle based on the pre-drilled license plate holes. Quality seems reasonable - i suppose you could hit it with some matte black spray paint if you needed to - but its fine."
"Works great, used this on a custom camper trailer to hold the license plate and act as a step bumper if needed."
"these are awsome if your have a plastic bumper and want to mount some lights or a light bar like i did, i would recommend these."
"its really heavy for the application use on the bumper but i suppose it need to be to withstand the cars bumping against it."
"I used this on my Ridgeline to mount an led light at."
"if you're buying this for a Chevy 1500 and want to mount 9 inch LED round lights (heavy), then you might want to order the bull bar."
Best Powersports Fork Brackets
Features: The brackets are made of 304 stainless steel. Package Including: 2 x stainless steel brackets (No Including Lamp). 2 x hex Allen wrench. 1 x little adjustable flat wrench. 3 x screw. Package Includes：2 x stainless steel brackets (No Including Lamp), 2 x hex Allen wrench,1 x little adjustable flat wrench,3 x screw.
Reviews
Find Best Price at Amazon"Mine came very well packaged and protected, but it had a large scratch on the surface paint."
"For no fault of the product its a bit flimsy on my vehicle based on the pre-drilled license plate holes. Quality seems reasonable - i suppose you could hit it with some matte black spray paint if you needed to - but its fine."
"Works great, used this on a custom camper trailer to hold the license plate and act as a step bumper if needed."
"yesterday as a last resort "left my tow chain at home" I pushed my wifes van to the gas station."
"these are awsome if your have a plastic bumper and want to mount some lights or a light bar like i did, i would recommend these."
"its really heavy for the application use on the bumper but i suppose it need to be to withstand the cars bumping against it."
"I used this on my Ridgeline to mount an led light at."
"if you're buying this for a Chevy 1500 and want to mount 9 inch LED round lights (heavy), then you might want to order the bull bar."
Best Powersports Fork Sliders
Sparco Slider Seat Track Set is a universal double locking seat track set. It will bolt directly to all Sparco bottom mount seats.
Reviews
Find Best Price at Amazon"bar/tube in half and inserted a solid rod the ID of the tubing - works fine."
"work ok not the smoothest action and have to buy mounting hardware separate but it is what it is a seat bracket."
"Works very well."
"Slider is great I just don't understand why the holes in the bottom and top are not the same spacing apart."
"Fairly simple, they work and do their job."
"worked excellent in my dad's 65 impala."
"Slider works but tracks are very loose and has wobbly side to side movement."
Best Powersports Fork Tubes
The Titan clamp-on pallet forks feature a simple design which slides over the cutting edge of your bucket and clamps down, locking the unit in place.
Reviews
Find Best Price at Amazon"I would certainly recommend these forks to anyone needing to lift pallets or other items that fit on them. I would have preferred that they were tapered like in the photo to help avoid stabbing product on the pallet (with the pointed part LOWER instead of higher)."
"the forks are boxed and heavy steel."
"I realize that maybe the shipping cost is cheaper by boxing them together and of course they always arrive at the same time.....just a thought!"
"My one and only problem, which isn't a problem with the forks, and having used fork lifts, is it's much more difficult to see where the forks are on a tractor bucket."
"My husband has been using these for over a year now for mainly for moving whole logs with his tractor."
"They are pretty solid."
"Very well made."
"I have a JD 2210 compact tractor it does not have the power able to use these forks."
Best Powersports Front Forks
Entire kit set up to go from box to bike in under an hour with basic tools. In fact, the entire Slammer kit is set up to go from box to bike in under an hour on most models with just basic tools.
Reviews
Find Best Price at Amazon"very easily installed, puts it at a perfect height."
"Love the springs!"
"shocks took 20min."
Best Powersports Springer Front Ends
Kuryakyn 2275 2-Piece Fork Mounts 54mm-58mm Fits: Inverted forks Note: Not compatible with H-D. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I used them tomount my wind shield on my 58 mm forks works great on my 93 dynawg look great."
Best Powersports Frame Forks
The Titan clamp-on pallet forks feature a simple design which slides over the cutting edge of your bucket and clamps down, locking the unit in place.
Reviews
Find Best Price at Amazon"I would certainly recommend these forks to anyone needing to lift pallets or other items that fit on them. I would have preferred that they were tapered like in the photo to help avoid stabbing product on the pallet (with the pointed part LOWER instead of higher)."
"the forks are boxed and heavy steel."
"I realize that maybe the shipping cost is cheaper by boxing them together and of course they always arrive at the same time.....just a thought!"
"My one and only problem, which isn't a problem with the forks, and having used fork lifts, is it's much more difficult to see where the forks are on a tractor bucket."
"My husband has been using these for over a year now for mainly for moving whole logs with his tractor."
"They are pretty solid."
"Very well made."
"I have a JD 2210 compact tractor it does not have the power able to use these forks."
Best Powersports Chassis
Heavy duty tie rod ends Complete tie rod assembly Stock length replacement Available in swaged design TERMS OF WARRANTY SuperATV offers the premium product on the market and extends the industry’s best warranty to go with it. Each set of SuperATV tie rods come with a LIFETIME WARRANTY. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I've beat the snot out of them and they haven't broke broke like the stock Tie Rods did after a couple rides."
"Very strong ...heavy duty."
Best Powersports Shocks
PUMP FOX 150 PSI. Makes spring rate adjustments on the air sleeve a simple task.
Reviews
Find Best Price at Amazon"It is small, do not let the size fool you, it is solid and tucks away in any handlebar or swing arm bag."
"The only reason for 4 stars is that I do not like the large gaps in labeled increments on the gauge."
"Works very well."
"I use this for my Harley touring air suspension - it’s WAY higher quality than the HD branded stuff, looks pretty bulletproof, and is spot on accurate - compared it to several good digital gauges, it’s +/- 1 psi."
"Just like the branded Victory pump."
"I've been searching for a pump for my new Street Glide Air shocks."
"I never had a bike that I had to use a shock pump on previously but this summer I bought a Raleigh."
"Finally replacing my previous pump from 2000."
Best Powersports Springs
The Front & Rear Spring Assist (Load Carrier) by Gabriel combine shock and spring technology to reduce the loss of ride height in ongoing loaded conditions. And like all Gabriel shocks and struts, Front & Rear Spring Assist feature a super-finished chromed piston rod for superior corrosion resistance and a leak-proof piston seal which extends product life. The Front and Rear Spring Assist (Load Carrier) by Gabriel combines shock and spring technology to reduce the loss of ride height in ongoing loaded conditions. Combines shock and spring technology Constant-rate front coil springs can help improve stability and restore or maintain ride height Variable-rate rear coil springs provide 500 lbs. Combines shock and spring technology, economical solution for heavier duty use.
Reviews
Find Best Price at Amazon"Gabriel 43162 Rear Spring Assist Load Carrier Shocks - 2 Pack. So far so good, My Sonoma rides nice on this ones, I usually install shocks myself but this one are not for the do "yourself-er" , they come fully extended, and they are hard to press down to be installed, even my mechanic said they were harder to install."
"They are a little difficult to install but if you're handy with a basic set of tools it shouldn't be a problem."
"Definitely stiffened up my truck."
"Easy install."
"I don't think you'll find a better shock at this price point."
"They don't appear to be as well made as I expected but they'll do the job."
"Work great truck rides much better."
Best Powersports Lowering Links
VMS Harley Touring Lowering Kits are Manufactured of High Quality A50 Grade Steel. These are the Best quality and Nicest Harley Touring Rear lowering kits sold on the Internet, period! SUPERIOR WELDS - Manufactured of High Quality A50 Grade Steel.
Reviews
Find Best Price at Amazon"Probably should have made a video of the installation , because my friends could not believe how easy this kit was to install."
"Perfect product."
"Perfect for lowering!"
"Bike looks good I did th 2 inch."
"Good product for the price."
"If you don't mind a rigid style ride go ahead."
"good heavy duty lowering kit."
"It didn't come with picture install directions."