Koncocoo

Best Powersports Clutches

Ram Mount Motorcycle Brake/Clutch Reservoir Base with 1-Inch Ball
To see if the RAM-B-309-1U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit.
Reviews
"Bought this to mount my iPhone 6+ in a SlipGrip RAM holder made for my Otterbox Defender Case on my 2012 Goldwing."
"However, if you try to torque it to 9 ft-lb (as per the Forza manual), you will destroy the plastic spacers included with the RAM Mount."
"I almost wish I got the one that had 2 balls on it since I already have a Kuryaken cup holder on the left/clutch that doesn't work with the Ram Mount where I want to put my phone that I got this mount for. I would consider getting a new cup holder if I got the one with 2 balls. Maybe I'll switch it to the other side and have the cup holder on the right."
"The huge variety of different devices and mounting options mean you're really only limited by your imagination as to what they can be used for."
"The only remaining issue is that the brake&mirror part which faces the Ram Mount has a portion of metal surface now is exposed (shown in pink arrow) in the photo."
"I already have a Ram handlebar mount on one side of my bike for my phone/GPS and bought this to mount my GoPro camera and/or GoPro remote."
"I've used RAM for 2 years now and have never had my phone or GPS fall off. 5 Stars No complaints. I would recommend the center triple tree mount as that has the best viewing and cosmetic appearance however this mount allows it easier to see the phone plus it is much cheaper."
"Bought this for a 2015 Concours 14, which this part is compatible for with according to the manufacturers website."
Find Best Price at Amazon
Polaris 2870506 Clutch Puller Tool All Models 1985-2011 | PP3078 | 15-878 | MTC 30260
One (1) Year Warranty Fits ALL Primary Clutches in Polaris Model Years 1985-2011, WILL NOT Fit 550 Sportsman XP 4x4 09-11, 550 Sportsman (all models) ,800 RZR 4x4 08-11, 800 RZRS 4x4 09-11, 850 Sportsman XP 4x4 09-10, 850 Sportsman (all models). OEM Numbers: 2870506 / 15-878 / PP3078.
Reviews
"I guess those other guys who stripped their s^%* shouldnt be working with there hands."
"Cinch it down, then tighten another 1/4 turn."
"Once the bolt holding the clutch pulley is removed, this tool is inserted and screwed-in until it stops."
"Watched videos on how to pull clutch without this and realized this is the part to go with if you don't want to ruin anything important."
"Normally I try to avoid being too harsh on a product for a misapplication, but I'm marking this down because the product description is completely inaccurate for snowmobiles."
"Only went in a few threads and when I tried to tighten up on it stripped the threads off the tool and damaged the threads in the clutch."
"the product does not fit polaris 2008 700 rmk primary clutch, the threads are wrong."
"Product is very strong but it doesnt fit my polaris sportsman 1000 due to the length of the actual tool its to long the belt housing on mine os faceing backwards and the axle is perfectly in the way of the hole for the primary clutch."
Find Best Price at Amazon
CENTRIFUGAL CLUTCH 3/4" BORE #35 CHAIN 12T FOR GO KART MINI BIKE ENGINE 3/4 BAR
This is a high quality, centrifugal clutch that is suitable for numerous applications. Enter your model number to make sure this fits.
Reviews
"I imagine I can remedy this issue by filing it down a bit, but as of writing this review, the 1/8th of an inch it's sitting forward on the crank isn't adversely affecting the performance of my mini-bike, so I haven't bothered yet."
"The clutch looked to be new and in nicely built, but alas, I ordered the wrong bore size."
"My 10 year old and I are working on a Rat Rod go kart."
"Just the right part for our gocart you won't be disappointed."
"works great on our go kart...great acceleration and good top end speed."
"Good light/medium duty go kart clutch installed on my daughters Predator 212 from HF."
"Looks heavy duty but takes more RPM to get it rolling."
Find Best Price at Amazon

Best Powersports Engine Parts

66/80cc Flying Horse Silver Angle Fire Bicycle Engine Kit - 2 Stroke
All of the Flying Horse bike engines feature the latest upgrades, including Japanese crank bearings and clutch components. Power: 5-6 HP (horse power) stock Top Speed: 35-38 MPH (miles per hour) stock Fuel Economy: 100-150 miles per gallon The engine chain does not interfere with your current drive chain and peddling because it rides on the opposite side of the bike sprocket. We make certain that all of our manufactures abide by strict quality control assurance measures and use the highest quality material so that we can make certain that all of our customers get only the best. The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation).
Reviews
"Took a lot of YouTube to assemble for someone who has no mechanical skills but in the end it turned out near perfect ."
"bought two 66/80cc on here@ almost same price, flying horse brand is definitely better. good = upgraded exhaust is a nice touch, beefier clutch pull & rear sprocket, brackets and bolts are slightly better, this company's customer service is top notch, cooler sticker, haha. bad = both came with crappy spark plug, can't think of many bad.. they seem to have addressed most of the problems from my 1st kit.. good luck."
"The clutch lever, Exhaust, The finish (paint) on the motor and a few other things were noticeably higher quality than my first kit- (Ebay 140$ generic kit). From this point on, ALL my future bike projects will be getting this kit."
"This engine is working great."
"Very good kit came with no instructions but i figured it out."
"Great product."
"The kit contained all the parts but I am having to make modafications to the drive area and muffler to make it fit."
"Only half of the rest sprocket clamp assembly was sent."
Find Best Price at Amazon

Best Powersports Drive Train Parts

Between The Lines Designs Dura Flex Ice Scratchers
zinc plated, wire rope for increase down pressure. Knurled mounting surface eliminates spinning and loosening on the sliderail. Comes standard with carbide tips Ultimate engine cooling and slider lube Unmatched performance and weight Works with all reverse and non-reverse gear equipped snowmobiles Pre-assembled for one bolt mounting Virtually indestructible zinc-plated wire rope for increased down pressure and no coating to crack or peel Improved crimps for greater hold.
Reviews
"Got a hot running sled??"
"I have a Yamaha 2006 RS Venture with the 144 inch x15 inch x 1.5 inch track with 23,700 miles. On my Venture there is no part of the rail that is two inched above the track so I had to set them on a slight angle instead of straight down as the manufacture recommends."
"Great design for scratchers since they don't get destroyed if you back up with them down like some other designs."
"I bought these ice scratchers as replacements for the stock ones that came on my sled."
"I ride in the mountains so they are only used when I'm on the trails but they do the job of keeping snow in my track and tunnel."
"Good set of scratchers, I had to drill my skid to install and spent quite a bit of time deciding the perfect place (but that's just me)."
"If you mess up and forget they are down and you go in reverse..... no worry."
"I haven't gotten to use them, but installation required drilling a larger hole."
Find Best Price at Amazon

Best Powersports Valve Parts

Hot Cams HCSHIM01 Shim Kit
7.48mm Complete shim kit 1.20-3.50mm in .05mm increments with 3 shims in each size. Enter your model number to make sure this fits.
Reviews
"If you do not plan on adjusting a lot of valves, hot shims sales refill packs if you know what it is needed."
"I received a used kit that had used shims in it."
"My only issue is the kit could provide more of the shims that are likely to be actually used."
"Not a big deal for me but if you need the exact 3.00mm to make your clearance perfect you may have trouble."
"Any bike I own in the future I will buy a Hot Cams shim kit for without question."
"Basically, it saves you the trouble of opening up your bike, THEN running out to Honda and HOPING they have the shim(s) you need. If you're gonna do shims, you'll need a micrometer like this one; http://www.amazon.com/General-Tools-001-Inch-Graduation-Micrometer/dp/B00004T7UD/ref=sr_1_2?ie=UTF8&qid=1356827905&sr=8-2&keywords=micrometer. I believe this is the one I have."
"The shims will hold up just fine in your ZX6R as they hold up well in many street bike applications."
"It's a nice kit."
Find Best Price at Amazon

Best Powersports Cylinder Heads

Athena Big Bore Cylinder Kit (70cc Bolt On) - 47.66mm Bore 070200
Use stock reeds for Yamaha VinoThis item fits the following models: 2002-2004 Yamaha YJ50 Vino2002-2005 Yamaha YJ50RA Vino Classic2002-2005 Yamaha YW50 Zuma2008-2011 Yamaha YW50 Zuma. Kits include aluminum cylinder with nickel-carbide coating designed with larger water jackets.
Reviews
"Installation took a very reasonable amount of time, and because it's a 2-stroke, there's not much that one can mess up. **Update** I've put over 1500 miles on this cylinder kit (longer than the original Yamaha) with zero issues."
"nice kit put about a 1000 miles on it sofar alot more power have to watch top speed now, installed with 90 main jet with stock carb, needle 1 clip position richer, 2002 yamaha zuma runs great."
"installed on my 2009 zuma and works great without mod."
"Very pleased."
"Parts fits perfect."
"This is a top-notch kid guaranteed more horsepower and low-end torque highly recommended."
"Works great."
"Failure of piston rings very common problem buyer beware."
Find Best Price at Amazon

Best Powersports Engine Kits

66/80cc Flying Horse Silver Angle Fire Bicycle Engine Kit - 2 Stroke
All of the Flying Horse bike engines feature the latest upgrades, including Japanese crank bearings and clutch components. Power: 5-6 HP (horse power) stock Top Speed: 35-38 MPH (miles per hour) stock Fuel Economy: 100-150 miles per gallon The engine chain does not interfere with your current drive chain and peddling because it rides on the opposite side of the bike sprocket. We make certain that all of our manufactures abide by strict quality control assurance measures and use the highest quality material so that we can make certain that all of our customers get only the best. The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation).
Reviews
"Took a lot of YouTube to assemble for someone who has no mechanical skills but in the end it turned out near perfect ."
"The clutch lever, Exhaust, The finish (paint) on the motor and a few other things were noticeably higher quality than my first kit- (Ebay 140$ generic kit). From this point on, ALL my future bike projects will be getting this kit."
"This engine is working great."
"Very good kit came with no instructions but i figured it out."
"Great product."
"Fairly easy to install!"
"The kit contained all the parts but I am having to make modafications to the drive area and muffler to make it fit."
"Only half of the rest sprocket clamp assembly was sent."
Find Best Price at Amazon

Best Powersports Engine Mounts

Aftermarket Yamaha Motor engine mount Wave Runner 650 700 701 1100 1200 GP 760 GP 800 (4) PACK
OEM Quality replacement for broken motor mounts. Fits: LX 650 1991-1992, VXR 650 1991-1995, WAVE RUNNER 3 650 1990-1996, VXR PRO 700 1993-1994, WAVE RAIDER 700 1994-1997, WAVE RAIDER DELUXE 700 1995, WAVE RUNNER 3 700 1994-1997, WAVE VENTURE 700 1995-1998.
Reviews
"I will be doing more business in the future with this company!"
"Perfect!"
"POORLY MADE....NOT GOOD QUALITY ONE OF THE THREADS STRIPPED WHEN TRYING TO INSTAHL MAKING IT UNUSABLE."
Find Best Price at Amazon

Best Powersports Engine Gaskets

Briggs & Stratton 697110 Crankcase Gasket 015
Keep it Running - Keep it Genuine. Enter your model number to make sure this fits.
Reviews
"This gasket was used to re-seal my 17.5 horse Briggs intek engine during the camshaft replacement."
"Worked great."
"Just as expected it fit perfectly and shipping was very fast."
"it was a have too, with the rod replacemnet."
"Just what the doctor ordered."
Find Best Price at Amazon

Best Powersports Pistons & Parts

Niche Industries 1534 Yamaha YFZ450 Cylinder Piston Gasket Kit 2004-2009, 2012-2013
Niche Industries 1534 is a new Cylinder Kit and has everything you need to rebuild your Top End including: Cylinder, Piston, Piston Rings, Piston Pin, Piston Clips, Head and Base Gaskets and a Chain Tensioner Gasket. Enter your model number to make sure this fits.
Find Best Price at Amazon