Best Dehumidifiers
Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I removed the back cover: two screws at bottom rear, one at each side at bottom and two behind filter."
"A full container isn't that heavy, about 13.5 lbs, to carry with the single handle and to dump. I have a very large basement that had a high humidity of 60-70% or so it would fill the 13.1 container pints within the day, 12-24 hours. It works best in warmer weather (70's) which is when the humidity is high and mold can grow, warm and moist. I used the bucket for about 2 weeks to try it out and then I switched to the continuous drain tube which I connected a piece of clear vinyl tube (1 1/4 inch outer dia, 1 inch inner dia) from Home Depot which I connected to a "T" connector that I installed on my A/C condensation line that runs outside."
"I will never purchase another Fridgidaire product due to poor quality control and inept customer service, and the replacement dehumidifier that I purchase will always have the extended warranty through Amazon from here on out."
"The humidity sensor must be placed in the reservoir, because as soon as the fan clicks off, the humidity readout immediately starts climbing quickly. The poor sensor placement in the design makes the unit think it is 55% when it truly isn't. So it will click off at 45, then 10 min later it thinks its 55, the unit will click on, and immediately when the air flow is resumed, the sensor sees that its not as high as it thought, and you'll see the readout drop quickly back down. This unit could actually use a ton less energy if the sensor was placed in a location to get more accurate readings (maybe in a isolated chamber with vents directly outside of the unit, instead of INside the unit where all the water is collecting?)."
Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I removed the back cover: two screws at bottom rear, one at each side at bottom and two behind filter."
"A full container isn't that heavy, about 13.5 lbs, to carry with the single handle and to dump. I have a very large basement that had a high humidity of 60-70% or so it would fill the 13.1 container pints within the day, 12-24 hours. It works best in warmer weather (70's) which is when the humidity is high and mold can grow, warm and moist. I used the bucket for about 2 weeks to try it out and then I switched to the continuous drain tube which I connected a piece of clear vinyl tube (1 1/4 inch outer dia, 1 inch inner dia) from Home Depot which I connected to a "T" connector that I installed on my A/C condensation line that runs outside."
"I will never purchase another Fridgidaire product due to poor quality control and inept customer service, and the replacement dehumidifier that I purchase will always have the extended warranty through Amazon from here on out."
"The humidity sensor must be placed in the reservoir, because as soon as the fan clicks off, the humidity readout immediately starts climbing quickly. The poor sensor placement in the design makes the unit think it is 55% when it truly isn't. So it will click off at 45, then 10 min later it thinks its 55, the unit will click on, and immediately when the air flow is resumed, the sensor sees that its not as high as it thought, and you'll see the readout drop quickly back down. This unit could actually use a ton less energy if the sensor was placed in a location to get more accurate readings (maybe in a isolated chamber with vents directly outside of the unit, instead of INside the unit where all the water is collecting?)."
Size: 15.2”x 10.2” x 19.7” Weight: 30.5 lbs Rated current: 4.7 Amps Moisture removal: 4 gallons (30 pints) per day Water tank capacity: 3 liters / 0.8 gallons UL & Energy Star rated Includes: Washable filter, built-in handles and wheels, drain hose outlet Features: Touch control panel; auto restart, shut off and defrost; turbo mode with high fan speed; continuous dehumidifying with 24-hour timer; customizable humidity level from 35% to 85% Best for: Indoor spaces up to 1000 square feet, with room temp from 41°F to 95°F. Product Care and Use WATER REMOVAL: For manual removal: Turn off Dehumidifier when water tank is full, remove tank from Dehumidifier and empty its bucket. 4-GALLON LARGE DEHUMIDIFIER: If your standard unit of measure is ice cream, our dehumidifier removes up to 30 pints from the air per day. This moisture-sucking beast is fit for any basement, cellar or large room, and it’s Energy Star certified, so it quickly and effectively absorbs moisture without racking up your energy bill. It measures 15.2 x 10 x 19.7 inches, has a .8 gallon (3 liter) water tank capacity, and removes up to 4 gallons (30 pints in beer measurements) of moisture from the air per day.
Reviews
Find Best Price at Amazon"If you live in a climate where you don’t mind a certain amount of heating (Pacific NW, Midwest or New England), these are perfect. The other great benefit there is that they pump the heat outside (through the window exhaust) resulting in cool dry air inside. I would recommend both of them heartily, but they do differ in finer points, which is what detailed below: QUALITY OF THE BUILD: Both of these units are solid. Winner: Frigidaire. EASE OF MANEUVERABILITY: Both of these units come with casters attached and are breeze to roll around. One difference is that Frigidaire hydrometer goes in increments of 5% whereas hOmeLabs specifies the humidity in 1% intervals. Winner: Tie. MAINTAINING HUMIDITY LEVEL (AUTO ON/OFF): This is where both units fail in my opinion. The reality is that these units collect and store water, as such the humidity around them tends to increase quite rapidly once the airflow ceases. For example, if you set the desired level at 50%, it’ll run until it hits 45%, and it won’t turn on again until humidity rises to 55%. There’s nothing floating on top and contrary to the pictures of the product, it does not come with light blue backlight illumination. Unlike with AC or a fridge, the resulting heat is mixed with exhaust air and is pumped back into the room. Both of these units generate a comparable amount of heat based upon my totally nonscientific method of sticking my hand into the exhaust. Winner: Tie. DIRECTION OF EXHAUST: Both of these units draw air from the back and pump it out through the side. One notable difference is that Frigidaire throws it up at about 45 degree angle, resulting in a much better air circulation and, thus, much more uniform humidity level throughout the area. It also ends up not mixing the air as well in the overall area: after about 1.5 hr of operation, the humidity at knee level was ~40% (down from 65%), whereas near the ceiling was 50-55% (also, down from 65%), as measure by a network on AccuRite hydrometers."
"It will pull water from the air until it's full, then it will stop until you empty the water out. The drawer that holds the water comes out easily and has a handy handle (see what I did there?)."
"Have ben using for a few weeks and it is performing flawlessly."
"It works and takes a lot of moisture out of the air in the home."
"Working great (after only 3 weeks)."
"This is a work horse and makes the room in the basement very livable."
"It claims to remove allergens in the air, well let me just say that within the first week of using it we both noticed we didn't have that "basement" smell anymore and YES!"
"Since I move the unit room=by=room around my long mobile home, each closed room gets down to the selected level at least once a week, using the unit without the turbo even!"
Best Dehumidifiers
Effortless Humidity Control allows you to control the exact percentage of humidity in your room. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I removed the back cover: two screws at bottom rear, one at each side at bottom and two behind filter."
"A full container isn't that heavy, about 13.5 lbs, to carry with the single handle and to dump. I have a very large basement that had a high humidity of 60-70% or so it would fill the 13.1 container pints within the day, 12-24 hours. It works best in warmer weather (70's) which is when the humidity is high and mold can grow, warm and moist. I used the bucket for about 2 weeks to try it out and then I switched to the continuous drain tube which I connected a piece of clear vinyl tube (1 1/4 inch outer dia, 1 inch inner dia) from Home Depot which I connected to a "T" connector that I installed on my A/C condensation line that runs outside."
"I will never purchase another Fridgidaire product due to poor quality control and inept customer service, and the replacement dehumidifier that I purchase will always have the extended warranty through Amazon from here on out."
"The humidity sensor must be placed in the reservoir, because as soon as the fan clicks off, the humidity readout immediately starts climbing quickly. The poor sensor placement in the design makes the unit think it is 55% when it truly isn't. So it will click off at 45, then 10 min later it thinks its 55, the unit will click on, and immediately when the air flow is resumed, the sensor sees that its not as high as it thought, and you'll see the readout drop quickly back down. This unit could actually use a ton less energy if the sensor was placed in a location to get more accurate readings (maybe in a isolated chamber with vents directly outside of the unit, instead of INside the unit where all the water is collecting?)."
Best Dehumidifiers & Accessories
Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I removed the back cover: two screws at bottom rear, one at each side at bottom and two behind filter."
"A full container isn't that heavy, about 13.5 lbs, to carry with the single handle and to dump. I have a very large basement that had a high humidity of 60-70% or so it would fill the 13.1 container pints within the day, 12-24 hours. It works best in warmer weather (70's) which is when the humidity is high and mold can grow, warm and moist. I used the bucket for about 2 weeks to try it out and then I switched to the continuous drain tube which I connected a piece of clear vinyl tube (1 1/4 inch outer dia, 1 inch inner dia) from Home Depot which I connected to a "T" connector that I installed on my A/C condensation line that runs outside."
"I will never purchase another Fridgidaire product due to poor quality control and inept customer service, and the replacement dehumidifier that I purchase will always have the extended warranty through Amazon from here on out."
"The humidity sensor must be placed in the reservoir, because as soon as the fan clicks off, the humidity readout immediately starts climbing quickly. The poor sensor placement in the design makes the unit think it is 55% when it truly isn't. So it will click off at 45, then 10 min later it thinks its 55, the unit will click on, and immediately when the air flow is resumed, the sensor sees that its not as high as it thought, and you'll see the readout drop quickly back down. This unit could actually use a ton less energy if the sensor was placed in a location to get more accurate readings (maybe in a isolated chamber with vents directly outside of the unit, instead of INside the unit where all the water is collecting?)."
Best RV Furnishings & Interior Accessories
Effortless Humidity Control allows you to control the exact percentage of humidity in your room. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I removed the back cover: two screws at bottom rear, one at each side at bottom and two behind filter."
"A full container isn't that heavy, about 13.5 lbs, to carry with the single handle and to dump. I have a very large basement that had a high humidity of 60-70% or so it would fill the 13.1 container pints within the day, 12-24 hours. It works best in warmer weather (70's) which is when the humidity is high and mold can grow, warm and moist. I used the bucket for about 2 weeks to try it out and then I switched to the continuous drain tube which I connected a piece of clear vinyl tube (1 1/4 inch outer dia, 1 inch inner dia) from Home Depot which I connected to a "T" connector that I installed on my A/C condensation line that runs outside."
"I will never purchase another Fridgidaire product due to poor quality control and inept customer service, and the replacement dehumidifier that I purchase will always have the extended warranty through Amazon from here on out."
"The humidity sensor must be placed in the reservoir, because as soon as the fan clicks off, the humidity readout immediately starts climbing quickly. The poor sensor placement in the design makes the unit think it is 55% when it truly isn't. So it will click off at 45, then 10 min later it thinks its 55, the unit will click on, and immediately when the air flow is resumed, the sensor sees that its not as high as it thought, and you'll see the readout drop quickly back down. This unit could actually use a ton less energy if the sensor was placed in a location to get more accurate readings (maybe in a isolated chamber with vents directly outside of the unit, instead of INside the unit where all the water is collecting?)."
Best Dehumidifier Accessories
The hanging moisture absorber is designed to hang in closets and enclosed spaces to protect items and fabrics from excess moisture that causes damage. Hanging moisture absorbers.
Reviews
Find Best Price at Amazon"It's amazing to see the moisture accumulation in the bags but did alert us to a mold area in one of our crawl spaces."
"This product works very well for keeping moisture, and therefore, mildew and odors from forming on items."
"Hang in your closets and you won’t believe the moisture it absorbs."
"My husband and I couldn't stand the awful scent."
"It smells like raid insect killer."
"Received a defective box."
"No denying it: These stink."
"These smell TERRIBLE!"
Best Dehumidifier Replacement Parts
G3 filter captures the majority of “larger” airborne particles after the air is blew into the machine. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Works great, bought a second one."