Best Mechanical Springs
Neiko 200 Pcs Spring Assortment This is a new Neiko 200 piece spring assortment 75# Spring Steel Zinc Plated Compression Type: 9/32" x 1/2", 1/4" x 13/32", 7/32" x 11/16", 3/8" x 5/8", 3/8" x 3/4", 9/32" x 3/4", 23/64" x 1-3/8", 7/32" x 1-1/2" Extension Type: 13/64" x 13/16", 7/32" x 1", 1/4" x 7/8", 5/16" x 1-1/8", 5/16" x 1-1/4", 5/16" x 1-3/4", 11/32" x 1-27/32". WIDE RANGE OF SMALL SPRINGS: 200-piece set of compression and extension springs for shops and home repairs.
Reviews
Find Best Price at Amazon"Great assortment of compression and tension springs, all in bins of a useful compartment holder."
"Lost a small spring and had to buy this whole set to replace it."
"Although these springs come in a range of sizes, they're all made from about the same gauge wire, so they're all roughly the same strength."
"Most of the springs have higher tension than I expected, especially the extension springs."
"tiny spring broke on a camper door and needed two to repair it."
"Great assortment for the price."
"I used 1 spring to repair the latch on an Andersen 3000 storm door."
"I purchased these springs to use as spring locks for my rabbit cages."
Smooth soft opening and closing stays with one way rotary clutch-dampening mechanism.
Reviews
Find Best Price at Amazon"If the lid is heavy you need to move the round reduced speed hinge closer to the back of the chest and move the connecting arm up as high as possible on the lid(when the lid is open. Look at my pics and you can see where I had to re drill and move my hing towards the back of the chest and just below the lid height when closed so I could have maximum reach to us for leverage against the heavy lid."
"I agree it works well to mount the body of the lid stay close to the hinge side of the lid, just keeping it far enough from the back of the chest so it can rotate on its mounting pin and not hit the back wall of the chest."
"I put these on a toy box that I was fixing up."
"I bought this for a toy box lid to keep my 2 year old and baby on the way from getting fingers slammed and heads closed in the lid."
"After trying a cheaper friction support hinge that bent on the second use, I ordered this product for an old toy chest I’m rebuilding."
"I was very concerned about pinching potential when building my daughter's first toybox."
"I bought this to use on the lid of a bathroom storage box that I've repurposed for a toy box."
"My only complaint is that the directions weren't the easiest to follow so the installation can be a little tricky."
This Apexstone lid support can be used for cabinet door , ,trunk ,piano frame ,container etc.
Reviews
Find Best Price at Amazon"Instructions were for a larger strut so you'll either wind up playing around with different positions or doing some algebra to figure out the correct spots."
"They work as advertised."
"We needed to replace the spring on our boat glove box and was extremely satisfied with this product."
"Received and performed as expected."
"Great product great price."
"Not bad, works for the toy box."
"Be very careful, these are soft open, not soft close."
"Exactly as described at a good price."
Best Mechanical Air Springs
Please remember that air springs do not increase the load-carrying capacity of your vehicle.Basic Kit includes everything for a quick installation: 2 Air springs Brackets Hardware Air line Separate inflation valves for manual inflationFeatures & Benefits of Ride-Rite Air Bags and Air Spring Kits Keep the Vehicle level - improve steering control and braking effectiveness level headlight beams and reduce tire wear Reduce suspension fatigue - keep leaf springs from sagging under repeated or constant load Air adjustments improves the ride - allowing the air springs to be matched to the load Level off-center loads- individual inflation valves allow for adjustment side-to-side Reduce bottoming out - protective air cushion softens contact between the axle and frame Increase vehicle stability - absorbing road shock providing ideal ride conditions for passengers and load. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I can air them up to 40-50 psi when I am loaded and the truck sits level to a tad higher in the rear and I still get a nice smooth ride at the same time. As for load capacity, I've hauled up to 6 pallets of sod on my Equipment trailer and a skid steer twice and the truck does not sit low a bit in the rear."
"-Installable with a friend and some tools (Floor jack, Jack stands, Sockets and wrenches) but by no means is it easy. -Ride quality was still very nice given the conditions. -They do leak a little air over time. I also have to overshoot my target pressure by about 10 psi do to the little bit that is released when I pull the chuck off."
"It only took a couple of hours to install the air ride."
"One thing to note: I added a AirLift WirelessOne compressor kit soon after discovering that with my set-up I had to lower the pressure when hitching or unhitching (In retrospect I could have put some wood blocks under the jack but I also really wanted on-board air) but the standard set up with the valves works fine just make sure to check all fittings with soapy water in a sprayer and you'll be good to go."
"Before these helper springs were installed the camper would really sag the rear suspension causing premature wear and tear. These helper springs eliminate 100% of that sag and protect against costly repairs."
"FYI do buy the compressor kit: Firestone (WR1-760-2158) Level Command II Kit because it takes a headache out of filling air!"
"Only issue I ran into is if you have Husky fender liners you will have to trim them a little to clear the top mounting bracket."
Best Mechanical Compression Springs
Neiko 200 Pcs Spring Assortment This is a new Neiko 200 piece spring assortment 75# Spring Steel Zinc Plated Compression Type: 9/32" x 1/2", 1/4" x 13/32", 7/32" x 11/16", 3/8" x 5/8", 3/8" x 3/4", 9/32" x 3/4", 23/64" x 1-3/8", 7/32" x 1-1/2" Extension Type: 13/64" x 13/16", 7/32" x 1", 1/4" x 7/8", 5/16" x 1-1/8", 5/16" x 1-1/4", 5/16" x 1-3/4", 11/32" x 1-27/32". WIDE RANGE OF SMALL SPRINGS: 200-piece set of compression and extension springs for shops and home repairs.
Reviews
Find Best Price at Amazon"Great assortment of compression and tension springs, all in bins of a useful compartment holder."
"Lost a small spring and had to buy this whole set to replace it."
"Although these springs come in a range of sizes, they're all made from about the same gauge wire, so they're all roughly the same strength."
"Most of the springs have higher tension than I expected, especially the extension springs."
"tiny spring broke on a camper door and needed two to repair it."
"Great assortment for the price."
"I used 1 spring to repair the latch on an Andersen 3000 storm door."
"I purchased these springs to use as spring locks for my rabbit cages."
Best Mechanical Constant Force Springs
Extended length: 40 inches |. Item Width String: 1 inches |. Inside Diameter String: 1.2 inches |. Outside Diameter: 1.4 inches |. Load Capacity: 10.6 pounds |. Number of Items: 5.
Reviews
Find Best Price at Amazon"exactly what I needed, high quality product."
Best Mechanical Extension Springs
Assortment includes: Comp. 13/6"" x 13/16"" - 10pcs Comp. 5/16"" x 1-1/8"" - 8pcs Comp. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"My lawn mower works again and am ready for the next thing."
"just what i needed great assortment."
"Good spring steel."
"These springs are very small and cannot be used on anything automotive."
Best Mechanical Flat Springs
6061 aluminum is a lightweight, general-purpose aluminum alloy that can easily be machined or welded.
Reviews
Find Best Price at Amazon"Great price and what I needed to create a heat sink for a 6 pack of 50 watt resistors."
"I'm not a metal worker, but this worked perfectly for my DIY project, and the price was better than my local options."
"exactly what i ordered and expected."
Best Mechanical Gas Springs
This Apexstone 100N gas struts is perfect for supporting the cabinet door/lid to keep it open. Pressure:100N/22.5lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8" ,Distance extended: 9-11/16''.
Reviews
Find Best Price at Amazon"These things worked perfectly for the toybox lid I was trying to fix for our daycare."
"I went to a big box store and found a lid support to mount in the center that did the trick for me in conjunction with these struts. It is possible to calculate how much Newton force you need based on the weight of the lid, but hey who has time for math these days."
"They really work good i used them to make a custom floating entertainment with storage and they work like a charm i definately will buy some more..."
"the previous hook to hold up the door had malfunctioned more times than I can count and it was a painful blow to the head or my hand."
"Although it took me drilling several holes on the inside of the chest I installed these on, it's not the product's fault."
"I used these (comes in a set of 2) to hold the lid of a toy chest open (lid is 2'x4'x.75" wood)."
"Product itself is ok, I ordered the wrong size so it doesnt quite work as a soft close but that is my error not the products, so why only three stars?, it was a bit difficult to snap the part you screw in to the actual closing mechanism, in fact one of the metal pieces inside broke in the proccess."
"The two work ok on a small toy box lid, still need to close it slowly or it could slam though."
Best Mechanical Power Springs
This product manufactured in United States. Enter your model number to make sure this fits.
Find Best Price at AmazonBest Mechanical Torsion Springs
Note: To determine the handing of your torsion spring wind, look at the end of the spring with the ‘finger’ of the spring at the top of the wind. When standing inside the garage looking outside, the torsion spring with the black painted winding cone installs on the right side of the door, and the torsion spring with the red painted winding cone installs on the left side of the door. This Left hand wound torsion spring is used for replacing broken garage door springs. Right hand springs are mounted to left side of center and left hand springs are mounted to the right side of center (inside the garage looking out).
Reviews
Find Best Price at Amazon"Make sure the door is level and the cables on both sides have the same tension before starting then manually raise and lower the door several times before you try to use the door opener. Good Luck!"
"Instructions were clear and helpful."
"it was exactly what I replaced and very good quality."
"Springs were a perfect replacement for originals."
"Item was as described."