Best Metal & Alloy Raw Materials
Factories usually produce copper coated steel rods for a purpose of gas welding. - Rise in blood pressure, kidney damage, miscarriages and subtle abortions, disruption of nervous systems, brain damage, declined fertility of men, diminished learning abilities of children. Lead can enter a fetus through the placenta of the mother which can cause serious damage to the nervous system and the brains of unborn children. ● As translated from one preface of the Kassel experiments, "roughly 10,000 active dowsers in Germany alone can generate a conservatively-estimated annual revenue of more than $50 million".
Reviews
Find Best Price at Amazon"I am the clerk for our local cemetery and the burial records for the oldest section of the cemetery, dating back to the 1850s, have been lost. Every time he would come to the next marked grave, the wires would cross. I care deeply about this cemetery and about the people buried there (many of them are my ancestors), so I was hoping that would help me. I took the rods and proceeded to walk directly behind a line of stones so I could not read the names. The rods would swing one way or the other, so afterwards I would walk around the stone to see if the rods were right. All I know is that they work, they move even when you are standing perfectly still in the middle of the cemetery."
"Beautifully crafted dowsing copper rods. Upon arriving at the hotel, I used the rods in my hotel room and quickly determined that there was a little boy spirit in the room."
"Before I even read the paperwork it came with, I took them out and held the handles with the rods straight out and parallel to my lap. The rods will be straight out and running parallel to the floor with an ever so slight angle of about 5% leaning down. You hold onto the outer handle the L-shaped rod fits into - the handle does not restrict the movements of the rod. It was straight then crossed right when it was above the umbrella base filled with water. It said on one channel, you have to kind of break in a new set of dowsing rods. To do that you tell it, "This is what it looks like for Yes" and then you cross the two rods. Then I put them straight out again, holding by the handles, with no control of where the rods turn, and I said, "This is what it looks like for No" - they immediately turned outward on their own. These dowsing rods and handles are made out of copper. The handles are about 4.8 inches long and the straight part that sticks out of the handle is about 13.25 inches long."
"These rods are wonderful.....everything I needed for dowsing."
"As someone who practiced dowsing sometime ago, it is a pleasure to be re-introduced to it with these copper rods."
"This is my first time using rods I will explore with them,quality very nice thank you!"
A soft silvery metallic poor metal, elemental gallium is a brittle solid at low temperatures. Gallium From RotoMetals Inc is the purist and best to Use!
Reviews
Find Best Price at Amazon"Un fortunately I used my electronic scale that was finely calibrated to weigh the gallium and it weighed 100g INCLUDING the plastic test tubes."
""They called it 'pure' potassium, but it turned all white when I exposed it to air, and when I accidentally flushed it down the toilet the pipes exploded! "Love the radium, but I can only give it three stars because it caused horrible burns on my hands and gave my wife cancer." Gallium is what it is - a shiny silver metal with a melting point of just over 85 degrees F - and it gets five stars for it. I melted mine into a plastic cup and left it in my office overnight. I just enjoy it for what it is, a curiosity for my office to sit next to my Buckyball magnets, my fire-spitting wind-up nun, my musical LED top, my green laser, the rubber chicken that produces an egg out its rear when you squeeze it, and various puzzles, magnets, squishy things, nesting dolls, and other things to inspire me as I work."
"Compared to many other places it's a larger amount for a lower price at the time of purchase."
"Definitely a little messy."
"It solidifies again at room temperature but that can take a really long time due to known supercooling properties of gallium."
"Really fun... use a place mat underneath.. leaves a tiny mess but comes off with hot hot water."
"Really cool stuff to play around with."
"A fine addition to the home lab."
This product is an Aluminum Extrusion for your LED Strip Lights installation .These aluminum channels are not only a great housing for LED strip lights but also act as a heat sink for them as well, which in turn will expand your LEDs lifetime as well as brightness over time. They can be join like a single piece with the extension connector (search B072KMRXSX),You can purchase 2M (6.6ft) LED channels (search B06ZYBLTD1)for longer lighting project.
Reviews
Find Best Price at Amazon"These are great, well worth the price."
"worked for what I am doing with LED strips."
"Working out great for my custom under cabinet LED lighting project."
"Great channels for your led light strips."
"You have to glue the ends on but everything else is good."
"Nice tracking for LED custom made lamps."
"Great price and quality!"
"Decent product, quick shipping -- needs a bit more width to easily drop in a Phillips Hue Light-strip, and a bit more height to snap on the cover with the same strip."
Best Aluminum Metal Raw Materials
LED Strip Width: 12mm. * Channel Finish: Anodized Extruded aluminum. * Cover Material: Frosted Plastic. * Length: 10x1meter segments (10m total) * Package includes: 10 x 1m (3.3ft) Silver Aluminum U-channel. 10 x Milky white PC cover. 20 x Metal Mounting clips. 20 x End caps (10pcs in deaf and 10pcs with hole). 40 x Screws Note: LED strip light is NOT included. 3 Ways to Hold/Fix the LED Aluminum Channel * By Mounting Clips: Please search for "B01NBPF24M"(End caps included). * Pre-drill the base and slightly countersink to get the screws to lay flat. * Use Double Sided Foam Tape: please search for "B074J3X2SJ". Related Items You May Also Like: * 90Degree L-Shape Turning Corner Adaptor for U Channel: Please search for "B0714PHLXD". * 40-Pack 1M/3.3FT U-Shape LED Aluminum Channel: please search for "B06XWVVKDK". Simply stick the LED strip light's adhesive backing inside the channel, snap on the diffuser cover, and mount the channel whenever desired. SOUND QUALITY: The track is a sturdy u-shaped anodized extruded aluminum channel full of grooves for better heat dissipation; Milky white pc diffuser works well to help spread the light more evenly from the LED strip lights; METAL mounting brackets are heat-resisting,no deformation and hold the led channels firmly so you never worry about them falling off.
Reviews
Find Best Price at Amazon"During the time it took to order and receive the channels, I had tacked my strips up with cable staples because my wife loved the additional light too much to let me take them back down while we waited."
"Bought these for lighting under a bar counter and also for lighting project in a bedroom."
"I've bought other sets of this type of channeling before and they were no where near as thick as these are."
"I ordered these to put a bias light on the back of my TV."
"Beware, the end caps got stuck in the box and I couldn't find them for a while."
"They work."
"These are great U channels and will be put to good use in my motorhome storage bays and cabinets where extra lighting is needed."
"We use these all the time with LED strips to create finished custom lighting pieces for showcases, millwork etc."
Best Brass Metal Raw Materials
Specifications: Material: brass. Color: golden. Length: 100mm. Diameter: 2-8mm Package included: 15x brass rods. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I anneal these and turn them to the exact diameter needed."
"Will serve their purpose."
"Works good for knife scales."
"Haven't used them yet seem to be good quality."
Best Bronze Metal Raw Materials
C63000 Nickel Aluminum Bronze is intended for applications requiring combinations of corrosion resistance, excellent bearing properties at considerable loads, and extremely high strength both at room and elevated temperatures.
Find Best Price at AmazonBest Copper Metal Raw Materials
Factories usually produce copper coated steel rods for a purpose of gas welding. - Rise in blood pressure, kidney damage, miscarriages and subtle abortions, disruption of nervous systems, brain damage, declined fertility of men, diminished learning abilities of children. Lead can enter a fetus through the placenta of the mother which can cause serious damage to the nervous system and the brains of unborn children. ● As translated from one preface of the Kassel experiments, "roughly 10,000 active dowsers in Germany alone can generate a conservatively-estimated annual revenue of more than $50 million".
Reviews
Find Best Price at Amazon"I am the clerk for our local cemetery and the burial records for the oldest section of the cemetery, dating back to the 1850s, have been lost. Every time he would come to the next marked grave, the wires would cross. I care deeply about this cemetery and about the people buried there (many of them are my ancestors), so I was hoping that would help me. I took the rods and proceeded to walk directly behind a line of stones so I could not read the names. The rods would swing one way or the other, so afterwards I would walk around the stone to see if the rods were right. All I know is that they work, they move even when you are standing perfectly still in the middle of the cemetery."
"Before I even read the paperwork it came with, I took them out and held the handles with the rods straight out and parallel to my lap. The rods will be straight out and running parallel to the floor with an ever so slight angle of about 5% leaning down. You hold onto the outer handle the L-shaped rod fits into - the handle does not restrict the movements of the rod. It was straight then crossed right when it was above the umbrella base filled with water. It said on one channel, you have to kind of break in a new set of dowsing rods. To do that you tell it, "This is what it looks like for Yes" and then you cross the two rods. Then I put them straight out again, holding by the handles, with no control of where the rods turn, and I said, "This is what it looks like for No" - they immediately turned outward on their own. These dowsing rods and handles are made out of copper. The handles are about 4.8 inches long and the straight part that sticks out of the handle is about 13.25 inches long."
"Beautifully crafted dowsing copper rods. Upon arriving at the hotel, I used the rods in my hotel room and quickly determined that there was a little boy spirit in the room."
"They feel light but sensitive to the Earth Magnetics already, and I am not that healthy so if they move easily for me now, what will they do when I am well again?"
Best Iron Metal Raw Materials
10 Pounds of Red Iron Oxide (Fe203).
Reviews
Find Best Price at Amazon"I've only used a small amount of this product but I'm confident future projects involving high temperature welding will go exceptionally well."
"It’s a good product for my use and reasonably priced for the amount and a prompt ship from vendor as well as responsive communication ."
"It's nice and red like all the other Iron Oxide I've bought."
"Clean consistent supply."
"Was exactly what I expected!"
"I purchased this, along with aluminum oxide powder for an experiment and it worked great."
Best Lead Metal Raw Materials
This is 2- 25 pound bags (50 total) of Reclaimed Lead Shot Washed and Re-graphite Just for weight, not for reloading, Also great for making scuba weights.
Reviews
Find Best Price at Amazon"The two bags of reclaimed lead arrived in less than a week and I have already used then on my lead sled for bench rest shooting."
"I've mixed these with epoxy and graphite to make black plastic weights for various projects."
"We needed inexpensive lead shot to use in our shop for weighted bags as an alternative to sandbags (which just leaked everywhere!)."
"The reclaimed lead shot fit our application perfectly as it was very clean and dry."
"These two bags can be used by themselves without the use of the Caldwell lead bags that i have available."
"Bags were secure with no leakage."
"Very happy with my purchase."
"It took a lot of the wiggle out."
Best Magnesium Metal Raw Materials
symbol: Mg. High Purity: 99.99%. diameter: 0.7 "(18 mm) long: 4 "(100 mm). Note: High-purity magnesium rod in the air for a long time, the surface will be oxidized to darken, in the humid air speed will be faster, buyers should pay attention to keep it.
Reviews
Find Best Price at Amazon"Bought these to make some Dickson batteries, my apology if I missed named it."
"Shavings from the rods work excellently as a campfire starter."
Best Nickel And Nickel Alloys Metal Raw Materials
The Most Convenient Way to Hang Any Metal Objects Such as Tools, Knives or Signs.
Reviews
Find Best Price at Amazon"These things are seriously powerful, I mean seriously powerful, I broke a couple of them when I lost control of them and they snap together."
"Just about everything in a ship cabin is metal, so I want to use the magnets to hold up my newsletters, etc."
"Just right strength of the magnet. Not too strong making it impossible to detouch from the wall, not too weak. Just right for refrigerator to hold all what needed."
"These are super strong."
"Super strong magnets."
"Fantastic high power magnets."
"Nice, strong magnets in convenient packaging."
"It's so powerful magnetic force I never have."
Best Specialty Metal Raw Materials
A soft silvery metallic poor metal, elemental gallium is a brittle solid at low temperatures. Gallium From RotoMetals Inc is the purist and best to Use!
Reviews
Find Best Price at Amazon"Un fortunately I used my electronic scale that was finely calibrated to weigh the gallium and it weighed 100g INCLUDING the plastic test tubes."
""They called it 'pure' potassium, but it turned all white when I exposed it to air, and when I accidentally flushed it down the toilet the pipes exploded! "Love the radium, but I can only give it three stars because it caused horrible burns on my hands and gave my wife cancer." Gallium is what it is - a shiny silver metal with a melting point of just over 85 degrees F - and it gets five stars for it. I melted mine into a plastic cup and left it in my office overnight. I just enjoy it for what it is, a curiosity for my office to sit next to my Buckyball magnets, my fire-spitting wind-up nun, my musical LED top, my green laser, the rubber chicken that produces an egg out its rear when you squeeze it, and various puzzles, magnets, squishy things, nesting dolls, and other things to inspire me as I work."
"Compared to many other places it's a larger amount for a lower price at the time of purchase."
"Definitely a little messy."
"It solidifies again at room temperature but that can take a really long time due to known supercooling properties of gallium."
"Really fun... use a place mat underneath.. leaves a tiny mess but comes off with hot hot water."
"Really cool stuff to play around with."
"A fine addition to the home lab."
Best Stainless Steel Metal Raw Materials
Mesh count is the number of wires per inch, all our stock is square mesh with the same mesh count in both directions. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"this was fabulous, came super quickly, packaged safetly (didn't stab myself extracting) --i wasn't using this for gardening ( see it all around the block keeping flowers in place) but to cover a puppy pad for a wee beast of a puppy who thinks pads are tasty treats."
"It is ok but when you cut them to size it is not tacked together so it comes apart."
"Perfect fit as an ember and bird protector for a Pizza oven chimney."
"Used it for a homemade bird feeder."
"good mesh."
"Just what I needed for my smoke house."
"Delivered on time."
"Been using to attach aquatic moss, works great."
Best Steel Metal Raw Materials
In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance.
Reviews
Find Best Price at Amazon"Made my first knife with this steel."
"Requested size came wrapped with complete hardening instruction."
"Beautiful piece of steel!"
"very flat, came ready to cut, shape, grind, and heat treat."
"Shipped on time and with no issues."
"Great steel!"
"Is as stated, shipped/packaged well."
"Works great for making knives - it's annealed and easy to work with hand or power tools."
Best Tin Metal Raw Materials
Tin Metal Cut Pieces 99.9% 3/4" diameter wire cut to about 3/4"-1" length Sold by the bag, Will Average 0.8 to 1.0 pounds Physical Information Atomic Number: 50 Relative Atomic Mass (12C=12.000): 118.71 Melting Point: 450 F Boiling Point: 4100 F Density: 7.29 Weight Lb/in3: 0.2633.
Reviews
Find Best Price at Amazon"Going to use this Tin to alloy with lead to cast bullets for reloading."
"RotoMetals is my 1st stop for all my metal needs (i bought about 40lbs of bismuth and when I needed some tin, i searched for roto tin because these guys are absolutely perfect for this stuff)."
"As advertised, cut tin pieces."
"It's hard to find reliable sources for metals, especially ones like tin."
"Quick service."
"Arrived fast, just as described."
"Exactly as advertised, arrived much faster than expected."
Best Titanium & Titanium Alloys Metal Raw Materials
The grade 2 titanium alloy is made from 98.9% titanium, is stronger than grade 1 titanium, and offers a balance of weldability, formability, and corrosion resistance.
Reviews
Find Best Price at Amazon"I didn't use this for the purpose most people would."
"5 stars for speed and ease of shipment."
"Good, sturdy rod."
"We needed something that was smooth but not polished, and lower grade so it would be easy to cut."
"Its titanium!"
"If you're looking for a titanium rod for anodizing or looking for a strong metal to use."
"Good quality and it got to my door fast!"
Best Tungsten Metal Raw Materials
C2 Tungsten Carbide Round Rod, Ground, Precision Tolerance, ASTM B777-07, 0.09" Diameter, 12" Length
Tungsten carbide, also known as carbide, is an extremely hard alloy made from tungsten and carbon that offers high wear resistance as well as good corrosion resistance.
Reviews
Find Best Price at Amazon"I use this to role an edge my card scraper works great."
"I wanted a rod of very hard material with a good aspect ratio."
"Broken when receved not real..."
"Measured with several different instruments and rod is 0.505."
"as an FYI; the product states an outside diameter of +/-0.0001 inches... it is not even close to that."
Best Zinc Metal Raw Materials
This is a full Zinc ingot 99.7%min that weighs approximately 3.5 pounds.
Reviews
Find Best Price at Amazon"I use the ingot in the strainer basket of my Salt Water Pool skimmer, as a "sacrificial anode" to keep the stainless in the pool from being attacked."
"nice mold poured ingot, a bit heavier than the 3.5 lbs advertised which was nice, packaged simply and effectively and arrived promptly with some slight discoloration on face."
"And I used it to fill the exhust heat riser in my GM v8 cylinder heads."
"If you need a block of high purity zinc for a good price and delivered quickly, then look no further."
"I make copper jewelry and bought this to use as an anode in an electroplating system."
"Use it in my saltwater pool, little bit on the large size, but then I do not think I will ever have to replace it."
"As advertised, Roto Metals on the metal, (like is in the picture)."
"Exactly what I wanted for small casting projects."