Best Handgun Scopes
The TRUGLO TFO handgun sights use our patented technology. Enter your model number to make sure this fits. Fits the following models: Glock 17/17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38 & 39.
Reviews
Find Best Price at Amazon"The front sight fits slightly loose in the slide slot just as it should so you can make adjustments for proper alignment. I set mine straight with a small straight edge/ruler laying up against it and down the length of the slide BEFORE I put the rear sight on and it was very easy to line it up properly. The stock front sight screw was set further forward in the slide making use of a socket on the screw to remove it impossible because there was zero room between the front edges of the screw/bolt and the front of the slide. The Truglo front sight has it's mounting bolt set back further towards the rear of the slide slot making use of a socket to tighten the bolt with my standard Craftsman 3/16" socket doable. Coat the cleaned bottom of the front sight with Loctite making sure you do not get any in the bolt hole and set the sight onto the slide. The Loctite on the sight will do a fine job of holding everything in place, the screw just needs to keep everything in place while the Loctite cures and moderate screw tension will keep the sight in place for years. If the rear sight goes in almost half way with moderate tapping with a punch you should be able to install the rear sight."
"Even my camera had a tough time focusing on the right thing, when the light source was behind it (which is when it would generally be easiest to pick up on the details in most objects)."
"I wouldn't say they are twice as bright, but they are significantly brighter than other Trijicon sights and Tru Dot sights that I have."
"Even if they sit in a dark safe, they are easy to line up day or night."
"When I got them I was expecting Freakin laser beams, but they are not that bright. I bought the Armorer tool that is sold on Amazon to take off the front site."
"Nice bright sight picture during the day, and nice visible sights in the dark."
"Will give durability results after I send 100-500 rounds down the barrel."
"You'll need a Glock front sight tool to install front sight."
Rear sight available in green or yellow. We recommend that our handgun sights to be installed by a trained gunsmith using a “sight press”. Fits the following models: S&W® M&P (including SHIELD & .22 models, excluding .22 Compact / C.O.R.E.
Reviews
Find Best Price at Amazon"Great sights."
"They're bright with and without light."
"Clear, highly visible day or night, easy to install."
"Already tried these on my Glock 36."
"Also, in low light conditions my rear sight was visible but the front sight is not visible at all."
"Dark and outside works great."
"I've had these on several pistols now (mostly Glocks) and they perform just as well as much higher priced sights."
"After running about 400 rounds through the sights, I noticed that the front filament came loose to the point where it was about to fall out. After two different attempts at trying to reach Truglo, they told me that they would repair the front sight but that I would have to mail in my slide with the sights attached."
2.Twist the two small screws located at the head of the sight with a small Allen wrench to adjust the elevation and windage. 5.Open the back cover to replace the battery. Specifications: Dimension: 4.72” (length) x 1.54” (Diameter). Weight 4.5oz/150g. Power: < 5mw. Wavelength: 532nm. Reaching Distance: 980ft/300m. Battery: 1x CR123A Lithium ion battery (included). POWERFUL GREEN LASER, highly visible green laser in any environments with improved accuracy, reaches up to 100 to 300 ft. during the day and up to 1000 ft. at night.
Reviews
Find Best Price at Amazon"do be careful, as it's easy to go beyond the threaded points when zeroing it."
"I had recently lost a laser very similar to this one and it met all my expectations."
"That laser is so incredibly bright It practically blinded me and I wasn't looking at it at all. The rechargable cr123a is very easy to get and very reasonably priced. They are easy to turn and give you a good solid click when you turn them for easy one at a time click adjustments. I know some got bad ones but I can say for a fact I have messed around with this one for days before giving it to my brother and the laser stayed very bright and strong and true the entire time."
"I briefly mounted it to the side of my shotgun and was able to zero it quickly and engage moving ground targets out to 40 yds without much issue."
"The laser won't stay in place without attaching the included velcro strips to the inner wall of the mount, and the outside of the laser, respectively."
"Works great on a pellet rifle to dissuade feral pigs."
"Make sure to check the wall size of the blowgun before ordering the mounting as the mounting rails are sized differently according to the caliber of the blowgun."
"Had hoped it was just a dead battery or maybe the remote switch failed, put in a new battery and put the on/off switch back on in place of the remote switch (package included both) but to no avail."
Best Handgun Scopes
The TRUGLO TFO handgun sights use our patented technology. Enter your model number to make sure this fits. Fits the following models: Glock 17/17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38 & 39.
Reviews
Find Best Price at Amazon"The front sight fits slightly loose in the slide slot just as it should so you can make adjustments for proper alignment. I set mine straight with a small straight edge/ruler laying up against it and down the length of the slide BEFORE I put the rear sight on and it was very easy to line it up properly. The stock front sight screw was set further forward in the slide making use of a socket on the screw to remove it impossible because there was zero room between the front edges of the screw/bolt and the front of the slide. The Truglo front sight has it's mounting bolt set back further towards the rear of the slide slot making use of a socket to tighten the bolt with my standard Craftsman 3/16" socket doable. Coat the cleaned bottom of the front sight with Loctite making sure you do not get any in the bolt hole and set the sight onto the slide. The Loctite on the sight will do a fine job of holding everything in place, the screw just needs to keep everything in place while the Loctite cures and moderate screw tension will keep the sight in place for years. If the rear sight goes in almost half way with moderate tapping with a punch you should be able to install the rear sight."
"When I got them I was expecting Freakin laser beams, but they are not that bright. I bought the Armorer tool that is sold on Amazon to take off the front site."
"Nice bright sight picture during the day, and nice visible sights in the dark."
"Will give durability results after I send 100-500 rounds down the barrel."
"You'll need a Glock front sight tool to install front sight."
"Wish the front was a different color than the back, but I believe truglo makes a sight set with an orange front sight."
"Got my rear sight tool yesterday and finally got to complete putting the rear sight on my Glock."
"Excellent sights."
Best Rifle Scopes
Boasting Nikon's fully multi coated optical system and a versatile 4 to 12X magnification range, the prostaff 4-12x40 riflescope helps put virtually any shot in your comfort zone. Fully multicoated optical system transmits up to 98 percent of available light.
Reviews
Find Best Price at Amazon"Put this on a 17HMR rifle."
"I love this scope, easy to access the target and even though I would not call my self a good shot, I'm hitting my target within a couple of inches."
"Looks and feels great."
"wow i’m really impressed with this Nikon scope..super clear and strong.work perfect on Marlin XL7."
"Nice scope, best price around, clear glass!"
"I mounted this scope on my 30.06 and zeroed it with no problem."
"Super accurate scope, put it on my ar style 450 bushmaster and had it shooting 1 inch groups at 200 yards."