Best Collated Nails
Value not found. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Work perfectly in my Hitachi NT1850DM 18V nailer."
"this item is excellente. and the support it's wonderful."
"Item as described, very fast shipper, highly recommend."
"I don't know how much credit goes to these nails or or the great Hitachi brad nailer, but both work great together."
"Oh boy, I can do some air hammer nailing now."
"Great value for an assortment!"
"Sturdy , non jamming and nice assortmant."
"They are brads, what can I say."
1000 Pack, 18 Gauge 2" Brad, Fits Most 18 Gauge Brad Nailers. This product is easy to use. This product is easy to use.
Reviews
Find Best Price at Amazon"I used these on a crown molding and baseboard project in a Ryobi brad nailer and I had no issues with jamming."
"Worked as expected no issues."
"The consistency is very good and penetrates well - I use this on moldings against dry wall."
"Extremely high-quality brads to deliver good performance."
"Terrific deal on these brads."
"Great product and fast shipping."
"Good product, good price."
Bostitch FLN-200 2-Inch Flooring L-Nail, 1000-Per Box. Two-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailer.
Reviews
Find Best Price at Amazon"The shipping handlers make sure the rails are completely broken apart by the time they reach you."
"Quality nails, I used it on 3/4 hickory flooring with an auto nailer ($120ish one)."
"I did have some partial installed nails due to loss of pressure though. Update : After finishing the job : Used 99.9% of nails without sticking the gun."
"My pneumatic nailer spits the last nail out when the nails are out, so I wasted about 15 nails having to use the smaller pieces."
"There was a lot of conversation out there that these nails come in as lose nails, etc; I got least 18000 of them to do a 4200 sq ft home in hardwood; my hardwood guy tried the staples and it was cracking the hardwood, they told me to get these nails, I did, and I got to say, they work great; its got the little bites that grab onto the subfloor and wont budge; I had a great experience with these nails."
"Box came undamaged but the strips were not together."
"The box arrived broken open inside a huge shipping box."
"Local home improvement stores have these selling for $5 more per box so with a major wood floor installation project approaching, we decided to load up on these before the price changes."
Best Collated Brad Nails
Value not found. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Work perfectly in my Hitachi NT1850DM 18V nailer."
"this item is excellente. and the support it's wonderful."
"Item as described, very fast shipper, highly recommend."
"I don't know how much credit goes to these nails or or the great Hitachi brad nailer, but both work great together."
"Oh boy, I can do some air hammer nailing now."
"Great value for an assortment!"
"Sturdy , non jamming and nice assortmant."
"They are brads, what can I say."
Best Collated Finish Nails
Size Name: 1-Pack. Two-inch, 16-gauge, 20-degree angled finish nails.
Reviews
Find Best Price at Amazon"You can look at my review which will be close to my purchase date and tell how the product is doing as time passes."
"Angled to fit the new Dewalt 16ga 20v Nailer perfectly ...... perfect size for installing quarter round molding ..... packed well for shipping so as the box doesn't open and spill the contents ..... //Carl."
"I purchased two boxes of these to go with the nail gun I bought on Amazon."
"Only works with a Dewalt electric nail gun, so what is there to review?"
"Work perfectly."
"These aren't usually in stock in our local big box store, so we were happy to see them here at such a good price."
"Perfect for Dewalt nail gun."
"Although I haven’t used the product yet they apprear to be made of high quality."
Best Collated Framing Nails
Our fasteners work with many brands of pneumatic tools like Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, Makita, Porter Cable and more. If your tool model number is listed below and our fastener fits within the size range of your tool, our fastener will work, guaranteed. *** These fasteners are ENGINEERED TO FIT: B&C Eagle: SN2283, SN2290, Bosch: SN350-20F, Bostitch: F21PL, N88RH, N88RH-2MCN, N90RHN, N95RHN, RN90, Campbell Hausfeld: NS209000AV, NS219099AV, DeWALT: D51844, D51845, D51850, Duo-Fast: 903000, CN-350B, DF350S, NSP-350F1, NSP-350F2, SNP83, Fasco: F5C RHN 20-90, F5C RHN 20-90A SS, F6 RHN 20-90, Hitachi: NR83A, NR83A2, NR83A2S, NR90AC, NR90AC3, NR90AE, NR90AEPR, Makita: AN8300, AN922, AN923, Max: GS683RH, GS683RH-EX, SN80, SN883RH, SN890RH, SN90, Paslode: 5325 SRH, 5350 SRH-20, Porta-Nails: 660, Porter Cable: FR350, FR350A, FR350B, FR350MAG, Ridgid: R350RHA, Senco: FRAMEPRO 502, FRAMEPRO 600 , FRAMEPRO 602, FRAMEPRO 650FRH, FRAMEPRO 652, FRAMEPRO 700XL FRH, FRAMEPRO 702XP, FRAMEPRO 752XP, GT90FRH, SN60, SN65, SN65C, SN902XP, Spotnail: NPR90, YPR90, WEN: 61790, 61792, 91232. New and improved packaging helps protect product during shipment.
Reviews
Find Best Price at Amazon"I found the price to be reasonable, especially if one considers the time and gas saved by having them delivered along with other items, the more so if shipping is free. (Time costs something, after all, and the gas mileage of my truck makes me never want to go anywhere I don't have to) I'm not sure if it is true for all their lots, but the ones I received were made in Canada."
"I've run several thousand through my Dewalt nailer and not a single jam."
"I have bought nails at the big box store and the plastic strips ALWAYS are poor quality and I get misfeeds."
"These nails came in a 500-count box and were more expensive per stick than buying in bulk, but I don't use bright 2-3/8" framing nails that often so didn’t want a pile of them hanging around after the job was done."
"Can only say that these worked great in my husbands dewalt nailer, he was VERY happy."
"They fit my gun and hold my siding on."
"These are good nails at a good price."
"Sometimes when you can't find the nail you need at Amazon, check out the Home Depot that has tool rental - you can get them there in small amounts....they don't gouge you either!"
Best Collated Pinner Nails
GREX 23 Gauge 1-3/8" Length Headless Pins, 10M/Box. Precision drawn wire guarantees consistent accurate pins.
Reviews
Find Best Price at Amazon"Used with Grex's pinner, I have no failures and little to complain about."
"Great pins for my Hitachi pinner."
"Great product, very good value."
"Quality part for a quality tool."
Best Collated Roofing Nails
1-1/4" Smooth Shank 15 degree Coil Roofing Nails Features: Use in Roofing Nail Guns RN45B (2750-5338), N12-B, and N12-1 15 º roofing nails Smooth Shank Galvanized Diamond point Stanley Bostitch CR3DGL 7,200-Qty. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Nails are nails; not much else to say except timely delivery as always with competitive pricing."
"Worked very well for my roofing project."
"Worked great on my little roofing job."
"They're nails."
Best Collated Siding Nails
3,600 Pack, 2-1/2" x .092, Galvanized Ring Shank, Coil Siding Nail, Fits Bostitch #N63CP, #N64C, #N66C & Most Other 15°ree. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"They are nails, work great for siding or 3/4" wood or fencing."
"I was looking for nails for my Bostitch coil nailer for a siding project."
"Fit my nailer and work well hold great."
"Nails worked well enough."
"Good Nails."
"I'm happy with these nails because they do the job well at a bargain price."
"As stated, good quality OEM product."
Best Collated Nails
Bostitch FLN-200 2-Inch Flooring L-Nail, 1000-Per Box. Two-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailer.
Reviews
Find Best Price at Amazon"The shipping handlers make sure the rails are completely broken apart by the time they reach you."
"Quality nails, I used it on 3/4 hickory flooring with an auto nailer ($120ish one)."
"I did have some partial installed nails due to loss of pressure though. Update : After finishing the job : Used 99.9% of nails without sticking the gun."
"My pneumatic nailer spits the last nail out when the nails are out, so I wasted about 15 nails having to use the smaller pieces."
"There was a lot of conversation out there that these nails come in as lose nails, etc; I got least 18000 of them to do a 4200 sq ft home in hardwood; my hardwood guy tried the staples and it was cracking the hardwood, they told me to get these nails, I did, and I got to say, they work great; its got the little bites that grab onto the subfloor and wont budge; I had a great experience with these nails."
"Box came undamaged but the strips were not together."
"The box arrived broken open inside a huge shipping box."
"Local home improvement stores have these selling for $5 more per box so with a major wood floor installation project approaching, we decided to load up on these before the price changes."
Best Collated Siding Nails
3,600 Pack, 2-1/2" x .092, Galvanized Ring Shank, Coil Siding Nail, Fits Bostitch #N63CP, #N64C, #N66C & Most Other 15°ree. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"They are nails, work great for siding or 3/4" wood or fencing."
"I was looking for nails for my Bostitch coil nailer for a siding project."
"Fit my nailer and work well hold great."
"Nails worked well enough."
"Good Nails."
"I'm happy with these nails because they do the job well at a bargain price."
"As stated, good quality OEM product."
Best Collated Staples
Stape assortment pack consisting of 336 pcs of 1/4 TRA704, 504 pcs of 5/16 TRA705, 504 pcs of 3/8 TRA706, 504 pcs of 1/2 TRA708, 252 pcs of 9/16 TRA709 and 400 pcs of 5/8 SWKBN625. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I know it's easy to find info online, but it would be helpful if they have some info on the packaging."
"As a result, you may not be buying these more than once, opting to buy the commonly used sizes."
"At least in my Bostitch, if I don't use all of them at one time, chances are good they will fall apart when I take them out."
"You have to be very careful opening the package if you want to use it to store the staples."
"They fit the Stanley TR150HL SharpShooter Heavy Duty Staple Gun that I recently purchased."
"The thing works flawlessly; in fact, the best stapler I've owned--powered or manual."
"I was under the impression from other reviews (because it doesnt come with any explanation or instructions really) that I was suppose to see a light come on WHILE this charger was charging (i.e. For the first time while attached to the wall unit.)."
"And if you're looking for something to staple wood, this isn't it."