Best Electrical Fish Tape
These nonconductive fiberglass rods can be screwed together to form longer lengths for running wire through walls, attics, crawl spaces, sub-floors, and suspended ceilings.Kit includes 10 39\" rods with threaded brass connectors, a 6-1/2\" flexible acrylic connection that can be set to any angle, a brass hook end for pulling, and a brass eye end for pushing Can be extended up to 33 feet Plastic storage case Fiberglass diameter: 3/16\"; Fiberglass section: 39-1/4\"; Brass connector dimensions: 7/8\" L x 1/4\" diameter; Thread: 4mm x 0.7; Case dimensions: 39-1/2\" L x 1-7/16\" diameter. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Don't think it would pull too well as the section connectors seem to be a little weak on the bonding to the fiberglass if trying to pull wire groups."
"I like these, even though they break easily at the brass joints."
"I think this will work OK for running 14 gauge wire above our ceiling (under joists and along furring strips) for some recessed lighting, but I don't think this is up to the task of running 12/14 gauge wire through closed walls."
"Have used these for running everything from electrical to ethernet without issues around the house and at the office."
"Good Pull Rods, sometimes the connected ends are coming loose (Unscrewed), maybe make a locking kind so this will not happen."
"I will admit, in a uncomfortable position, I shoved one trying to force it into a tight space and can now say they aren't indestructible. I ran all the cameras without disturbing any insulation (which you never get fluffed back as good as it was blown in)."
"I recently used these to pull romex lines through ceiling joists for recessed lighting in a kitchen renovation."
"These suffer two types of damage: they break at the connectors, as others have mentioned, and the fiberglass will also splinter off of the rod and give you nice little fiberglass splinters on your hands when you try to pull it out."
The Klein 56001 Depth finder High Strength 1/8-Inch Wide Steel Fish Tape is 50 feet long and features permanent, laser etched 1-Feet increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out. The unique sloped handle optimizes the position of your hand for quick hand-over-hand rewinds and allows a more level payout of tape on the backswing while feeding conduit. A full grip-style handle gives you a firm, steady grip as you pull tape from the case. Full grip-style handle gives you a firm, steady grip as you pull tape from the case.
Reviews
Find Best Price at Amazon"My other issue is that the depth finder is that the depth marking are hard to see and finding them is not that easy."
"It is heavy gage metal made to last."
"Great, helped me run 40 feet of flat CAT6 cable under the living room carpet."
"They were 8g wires and had no problem thru 1/2 pipe for a hundred ft."
"Overall, this product is excellent....HOWEVER, mine does NOT have the distance markings that were advertised."
"I've used this several times on the day job running Cat 5 and Cat 6 cabling through conduit and through gaps between walls."
"I used this once for running network cables, but it never went back the right way."
"I would love to give this a higher review however the first time using it, after about the third or fourth pull, the reel bound up and would not recoil the tape anymore.. and believe me, I tried!"
The Klein 56005 Depth finder High Strength 1/4-Inch Wide Steel Fish Tape is 25 feet long and features permanent, laser etched 1-Feet increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out. Tempered, high quality tape keeps its stability as it glides between surfaces for effective pushing and pulling of wire under carpets, through insulated walls and over suspended ceilings. Tape Size: 25-Feet L x 1/4-Inch W x .030-Inch H. Weight: 1.1-Pound. Permanent, laser etched 1-Feet increments on the tape.
Reviews
Find Best Price at Amazon"Fishing business end looks nothing like the photograph."
"Worked great on a boat wiring job through the hull....not used to the frame reel...seems to go in or out on its own...would rather have a plain 25' pull wire without any reel or case....dave M."
"Very good fish tape."
"It doesn't have the hook at the end like it does in the picture."
"I was able to pull lots of wire with this."
"Not something I use often, but when I need it does the job."
"worked perfectly for snaking cat6 through ceiling tiles and walls."
"I had been borrowing a 65 foot Klein from a friend on a fairly regular basis so I decided to bite the bullet and purchase one for myself."
Best Electrical Pulling Grips
Kit comes with 1- New design: Retriever, Rolling Magnetic w/Rubber "Bicycle Grip" has 30% more pulling strength! 1- New design: 1 1/4" Round Tapered Bullet Drop Magnet w/Braided Brass Flex 13" Leader* & Fish Eye-Let (fits 3/4" hole) has 25% more magnetic strength & the tapered bullet gives it less drag...1- Pull Chain, 1- Operation Manual, 1- Black Blow Molded Carrying Case, Custom Form Fitting Tool Compartment w/Stowaway Handle & 2 Metal Latches (14" X 11" X 4"). New design: Retriever has 30% more pulling strength!
Reviews
Find Best Price at Amazon"A little pricey but I wont knock a star off."
"The only other negative, is the size of the hole that you have to make to put the magnet on the inside of the wall."
"used this to fish my speaker and video wires along the ceiling."
"Worked exactly as promised and was the primary factor in making my lighting project possible with reasonable effort."
"(DO NOT USE BULLET MAGNET INSIDE DRYWALL WITH METAIL STUDS.)."
"I'm not really a fun of single denominational tools, but in this case that job it does is well worth it."
"The magnets are really strong and work very well together."
"This is exactly what I ordered, it's not cheaply made by any means, and you can't beat the price!"
Best Punchdown Tools
With 110 and BK blades that are interchangeable and reversible, the professional punch down tool can inserts and cuts terminations in one operation. Adjustable high and low actuation setting accommodates termination requirements or user preference. The impact adjustment dial adjusts the force of the spring-action from low to high to meet different installation applications. Adjustable impact-force settings (Lo/Hi) can be used for various cable termination applications. Ergonomic design: Comfort grip that is easy to handle, adjustable impact-force settings (lo/hi) for various cable termination applications.
Reviews
Find Best Price at Amazon"The usability and features surprised me for a tool at this price point (."
"its a good punch down tool."
"It took me a minute to figure out how to use the thing (never used one before), but it’s really straight foreard."
"A great punch down tool for CAT5/6 patch panels."
"very efficient after getting used to it - this was the first time I used this kind of tool."
"Worked well for punching down 23 AWG CAT6 cable into an RJ45 jack."
"As a DIY network install novice doing cat6, this lunch down was easy to use and simple."
"I haven't used the little yellow wire stripper tool because it was too small for my big Cat6a cable."