Best Toilet Repair Kits
The Fluidmaster 400CR Toilet Fill Valve and Toilet Flapper Repair Kit is a complete fill and flush toilet repair kit that includes both the trusted Fluidmaster 400A toilet fill valve and the durable Fluidmaster 501 2” flapper. Fluidmaster is dedicated to making the installation of its products easy and simple with a complete line of toilet repair parts including: fill valves, single and dual flush valves, flappers, tank levers, toilet seals (bowl wax and wax-free), toilet repair kits, flush valve seals, connectors and more. Fix cracked fill valves and running toilets with one complete kit. Optimize your toilets performance with both fill and flush solutions.
Reviews
Find Best Price at Amazon"I finally had to replace one (the older design) because it repeatedly started having issues. First it started running, which was easily fixed with a cap flushing, but then water stopped flowing to the fill tube. The clog was down in the fill valve below the cap and did not stay fixed with a flushing, so I just decided to replace it. It is open ended just with hooks). My one toilet has a flapper with the timing cup on top of it and it's own drain seat insert that it's attached to (555CRP8, also made by Fluidmaster, 555C is the newest version) because the fill tube is too far from the drain and a standard offset on the flapper, as this has, wouldn't center and seal properly. The other toilet still has a firm gray one with a notched plastic "chain" that I installed separately years ago too."
"I had no idea this would be so easy, or would have tried it ages ago, instead of continuing to replace parts on those old ball-type floats that wear out so fast!"
"All due to a leaky toilet, the fill valve and/or the flapper was the problem."
"There was a defect in the plastic molding process leaving one of the clips only partially formed."
"Not as universal as you might think, but with minor mods to the flapper, I was able to make this work."
"Following the instructions, I was able to remove the old flapper (which was rock solid) and valve and replace it with the Fluidmaster in 30 minutes."
"Float doesn't float up with enough force to shut off valve."
"I guess I will go to a big box store and purchase another one to fix the leaking fill valve."
A complete toilet repair kit which also includes a replacement toilet flush valve, toilet handle and tank to bowl gasket, solving various leaking and common toilet problems. Fluidmaster is dedicated to making the installation of its products easy and simple with a complete line of toilet repair parts including: fill valves, single and dual flush valves, flappers, tank levers, toilet seals (bowl wax and wax-free), toilet repair kits, flush valve seals, connectors and more. Enter your model number to make sure this fits. Replaces inefficient fill and flush valves, leaky flappers, and broken toilet handles.
Reviews
Find Best Price at Amazon"I was able to replace everything and there are no leaks now."
"The Fluidmaster 400AKRP10 Complete Toilet Tank Repair Kit from Fluidmaster is a great Repair Kit."
"This set includes a new fill valve, flush valve, flush handle, all gaskets, and 2 tank bolts."
"Included everything that I needed to fix a 19 year old American Standard toilet (with all original parts), plus more."
"I was a little put off by some of the negative reviews but ordered it anyway and was glad I did."
"I went to the hardware store and ended up purchasing a Korky unit that now works very well. There was no mention until I had opened the product and begun installation that the gasket between the tank and the base that came with the product was not recommended to be used with my toilet. If not, I would have been without a working toilet until the next day as the hardware stores were closed by the time I was at that point."
"NOTE: The large red tank gasket will fit most toilets but probably not Gerber or Kohler. Only reason I gave 4 stars instead of 5 is because it didn't fit my Gerber toilet and I had to spend another $10 on a different gasket."
"This kit gives you everything you need to totally rebuild a standard toilet, and for only about $18."
Color: No Finish. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The flush valve in our kit had lug screws on it and there was no way to secure it, so I paid for a piece that I didn't need unless I can use it on the other toilet we have."
"I adjusted the opening the tube was supposed to fit into by sanding the ceramic opening with a 3/4" sanding drum on an angle drill. I tapered one end of the tube with a sander and it fit fine."
"After trying two other non Kohler all plastic brands that each had issues of either not turning off, filling up extremely slow, and both of them extremely noisy, I "bit the bullet," and purchased this one."
"I replaced everything in my Kohler Rialto toilet except for the ceramics and the flush handle."
"Expensive but necessary if you want to do the job right."
"If you can't replace your legacy Kohler toilet because of appearance reasons, this is your best choice. Specifically, you'll have to slit the end of the supplied diverter tube in a couple of places so it will fit the entry to the bowl. A friend suggested cleaning out the flush ports with a coat hanger as they can get clogged due to hard water."
"Even with the water level and float ball properly adjusted, the top of fill value continues to trickle out water."
"Clumsy, overpriced conversion kit."
Best Toilet Wax Rings
Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation.
Reviews
Find Best Price at Amazon"If the mounting flange is below the floor level, the Dance blue adapter is used to provide a perfect water tight seal."
"I though I was being lazy purchasing this bolt set, but it turned out to be a great tool for DIY person."
"these posts are great for re-setting a toilet if required."
"Nice design."
"The Danco bolts allowed me to extend the existing bolts in a very easy and short process."
"These bolts for the toilet are so easy to use and they work perfectly when I replaced my toilet."
"I see the plastic cap eroding quickly, I am already experiencing stripping from removing the cap so I can tighten the bolts."
"I finally got it to seat straight (I think, it seems to have sealed)."
Best Toilet Flappers
The Fits TOTO G-Max 3" Flapper by Korky features an oversized sealing surface to fit large 3" TOTO flush valves. Exclusive longest lasting red rubber resists chlorine.
Reviews
Find Best Price at Amazon"I installed this flapper as part of are replacement of the valve in a Toto toilet."
"Read and then reread the online instructions, make sure you understand them and you will be able to repair and adjust the TODO commode quickly and easily."
"It looks like this Korky 2021 flapper is the one that fits our Toto MS854114SL-01 toilet (CST 854SL in the tank). The original Toto flapper had either somehow shrunk or decayed over the years and would occasionally edge off the end of the valve and let water trickle out until it had to re-fill."
"Great replacement for my Toto flapper."
"This part works as expected and is FAR better than the OEM part that came with my Toto toilet."
"Plumber installed this in my Toto toilet and it works fine."
"Be sure that the attachment point to the flapper ball is in the same spot on the new ball, as it was on the old one. Some flapper balls have the attachment hole closer to the raising edge, as opposed to the center of the flapper ball; If that is true, you may consider shortening the chain by a couple links. But once you have determined the correct length, remove the assembly and then pull off the extra links with a needle nose plier, or stretch the closest unneeded link with two small screwdrivers as lever action, and pull off the extra section."
"The top of the flapper, where the chain attaches, is the same soft rubber as the rest of the item."
Best Toilet Trip Levers
Attention to detail, continuous improvement, over a thousand research and development professionals and 90+ years of experience fuel TOTO’s product quality. TOTO provides unmatched performance, durability and reliability, representing the ultimate in customer satisfaction for our toilets, faucets, lavatories, showers and products for the entire bathroom. TOTO installations offer peace of mind and performance you can count on.
Reviews
Find Best Price at Amazon"It shows that this replacement is reinforced substantially compared with the original one. In the picture I've disassembled the handles to show the spot where the original wore out."
"Purchased a TOTO toilet about 8 years ago as my teenage boys kept clogging the old toilet (ick right?)."
"Expensive."
"I believe the handle is still plastic,but the section that broke off is now reinforced as others have stated."
"This lever replaced the original and seems to have been reinforced with much more material in the area where the original eventually wore through and failed."
"If you're lucky enough to have one of these Pre-idiocy toilets that actually work without having to flush them three and four times, then getting out the brush and finishing the job anyway, you know that these critters decay over time, and depending on the type of water you have, this can happen pretty quickly."
"We had a leaking issue at the toilet."
"This handle fit perfectly on our toilet!"
Best Toilet Mounting Parts
When it comes to Toto, being just the newest and most advanced product has never been nor needed to be the primary focus. When it comes to Toto, being just the newest and most advanced product has never been nor needed to be the primary focus. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Local Fixture Shop sold me an expensive toilet seat for a skirted toilet."
"I you order the TOTO toilet seat SS114-03 SoftClose, it comes with the hardware for mounting."
"These worked and the toilet seat is secure."
"Although these are shaped slightly differently from our original Toto toilet seat mounts, they fit just fine."
"You must have these fasteners to install a toilet seat but they do not do a great job."
"This Does not fit most Kohler and American Standard toilets."
"Note: I had an extra rubber "washer" of sorts (it's clear and has the same whole as the caps on the toilet seat) between my seat and *one* of the holes before I bought these guys to replace the old ones that got shot."
"For whatever reason, attempting to tighten these results in the rubber collapsing; our toilet seat is held on but swivels easily."
Best Toilet Flush Valves
Genuine TOTO adjustable universal fill valve. Genuine TOTO adjustable universal fill valve. Enter your model number to make sure this fits. Hydrotect: Reducing Pollution the Natural Way, Adjustable height.
Reviews
Find Best Price at Amazon"I assume this was an issue with the fill valve, and since I had got 10 years out of the original fill valve I elected to replace the entire assembly versus trying to replace the round diaphragm at the top of the valve (which is an option; about $7). The open wrench is helpful to make that last 3/4 turn on the nut the attaches the valve assembly to the bottom of the toilet (be careful not to over tighten)."
"There is a thoughtful locking clip that you can attach to the tube adjustment to keep it from coming loose, but it is made of flimsy plastic and broke when I tried to insert it."
"I had trouble installing the plastic lock used to fix the height but found that I could just adjust the height after the unit was in the tank (but before I cut the plastic tubing)."
"Master bath Toto Drake toilet was randomly refilling so I ordered a new flap and tank assembly. I'm not unhappy with my Toto Drake toilets but am surprised they are considered so top- notch given the above mentioned minor issues."
"This fill valve replaces one that was extremely slow to fill the toilet."
"If you eyeball this, think making the overall length to match the older one will work, it'll be too tall and won't stop the water before it spills over."
"As a higher end general contractor I have put a lot of TOTO products in houses over the years."
"The problem is that it is hard to know the valve has failed unless you open the top and see that it is "stuck" half way."
Best Tank Balls & Rods
The kit includes a Korky Plus flapper, a plastic flush valve seat and silicone sealant to repair corroded flush valve seats without removing your toilet tank. The kit includes a Korky Plus flapper, a plastic flush valve seat and silicone sealant to repair corroded flush valve seats without removing your toilet tank. Repair your corroded flush valve without removing the tank.
Reviews
Find Best Price at Amazon"I should point out that, based on experience, this does not make the appreciated anniversary gift you would think it would."
"I needed a flapper to replace one that had fallen apart, this works quite well."
"messy to install, seems to work."
"Don't expect this flapper product to work 'universally' in every toilet."
"It was so easy to install and I didn't need any tools."
"I would hear the toilet tank fill for a couple of seconds every 20 to 30 minutes - I didn't realize it was the flapper leaking at the time."
"While the black ring mounted well, the flapper doesn't always land securely on it, any more than the 10 year old similar Korky flapper it replaced landed before adding the ring."
"I didn't want to deal with the hassle of a return on this cheap purchase, so I simply bought a Fluidmaster 503 Sure-Fit Flapper from Amazon for $4.97 and free Prime shipping."