Best Automotive Back Up Light Assemblies
Specification: LED Power: 18W (6 x 3W High Intensity LED) Beam Pattern: Spot Beam Input Voltage: 9-30V DC (fits 12V, 24V vehicles) Working Lifespan: Over 30,000 hours Working Temperature: -40~85 degrees Celsius LED Color Temperature: Pure White 6000K-6500K Material: Die-cast Aluminum Profile, High quality Led Chips, PC Lens Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive Certifications: CE, FCC and RoHS Applications: Off Road Lighting: Back Up Light, Reversing Light, Jeeps, 4x4, Cars, Motorcycles, ATV, UTV, SUV, Truck, Trailer, Forklift, Trains, Boat, Outdoor Lighting, etc. Other Lighting: Excavator, Dozer, Road Roller, Crane, Tractor, Harvester, Grain Drill, Fire engine, Rescue Vehicle, Camping, Mining, Construction Lighting, etc. FLUSH MOUNT: Flush mount design, effective protection, elegant appearance makes your off-road vehicle looks cool.
Reviews
Find Best Price at Amazon"I Installed these in my 2014 Jeep Wrangler rear bumper and am very happy with the outcome!"
"I mounted these in the toolbox of my truck to light up my bed so I can see when I'm getting gear out or when I'm hooking up to my gooseneck trailer."
"Bought these to install on my MoveBumper that i ordered with precut light holes."
"I installed them in my bumper for reverse lights."
"Very bright.. not high end but not a high end price.. nice and bright."
"I am using these for my reverse lights on my 69 F250."
"Works as described."
"I have a second set that I plan on installing on a different truck and will use silicone on these before installation."
√ This Bulb Same Size With W16W Standard Bulb,The bulb size may vary between the model or trim of your vehicle.
Reviews
Find Best Price at Amazon"Of course how well a bulb preforms is dependent on your bulb housing a reflector, but these have LEDs on all sides, so they are more likely to utilize the entire reflector. As you can see there is a gap in the up/down section on the JDM ASTAR 800 because that bulb doesn't have LEDs on those faces."
"I ordered this item to replace the third brake light on Toyota Highlander 2005."
"These hit that mark, easily without using complicated methods I've done in the past, I've used a lumen meter on my phone, used a camera and even measured the throw distance on the ground."
"Definitely much much brighter than the horrible stock yellow-ish incandescent bulbs, and with a nice clean pure-white light."
"I wanted to upgrade the cargo light in my 2018 Tundra because the factory light is a joke."
"WOW what a difference now I can CLEARLY SEE when I am backing up it really improved the backup camera view."
"FINALLY, after trying two other LED bulbs in the reverse lights in our 2007 Lexus RX350 (which were listed as fitting this vehicle, but didn't!"
"Error free fit is quite accurate; works the 1st time....no polarity issue, and size is similar to old bulb."
But led bulb only work for one type , our bulb come with standard base only work for standard socket ,not for ck socket. ( please check before you place the order , Our bulbs come with Standard Base, NOT CK Type, put standard bulbs into CK type sockets ， the bulb may POP THE FUSE OR BULB BURNT OUT IN COUPLE DAYS ,please do not leave one star review if you bought the worng type , we accept 30 days return). Buy with confidence, We offer "ONE YEAR" warranty on item(s) that confirm to be manufacturer defect.
Reviews
Find Best Price at Amazon"Shipping was fast and the item was just as describes!"
"When I found these JDM ASTAR lights, I admit I was skeptical, however I purchased them, installed them, and I was surprised and extremely happy the first time I backed up my driveway."
"Installed these in a Hummer H3 with Spec-D red/smoked lens tail lights."
"I was not expecting the output of these lights."
"I never ever had any other back up lights as bright as these are!"
"Super bright!"
"When I say work, I mean you will see red spots after looking at them for a few seconds they are so bright."
"I used to have to wait until is was dark outside to see to back my truck into the garage."
Best Automotive Marker Light Assemblies
Apply for Indoor and Outdoor uses, Back up light, Off Road Lighting, Truck, Trailer Interior and Exterior Lighting, Construction Lighting, Garden, Backyard Lighting, Boat Lighting.
Reviews
Find Best Price at Amazon"Pros: - Nice bright 6,000K white light. - Light unit was not hard to mount on the blower housing, just drilled 2 holes. - Power wires plenty long for my use (other than those connected to the light unit). Cons: - No instructions for wiring. I will need to extend the wires back to the mounting point of the blower on the front of the tractor so I can leave them permanently attached along the back of the blower housing and be able to disconnect them from the tractor without a few feet of loose wire to tie up somewhere when the blower isn't mounted. - The wires from power to the light bar wires have female spade connectors but the foot long wires on the light unit are stripped with no connectors provided."
"The price is great for the quality of this light."
"Great light for the money."
"So far so good, very brite, and went on my RZR 800 front bumper with no problems.. the hardest part was running a bus bar along the firewall and running the wires from my battery to it so that I could hook it up as an accessory.."
"I purchased kawell's 1 leg wiring harness with wireless control."
"Awesome Light for the price."
"Worked perfectly fine for a few months and is now full of moisture."
"INSTALLED ON TRUCK AND EVEN ADDED SILICONE AS I READ ALL THE WARNINGS. THIS TRUCK JUST SAT (DIDNT EVEN DRIVE) AND THREE OF THE EIGHT THAT I BOUGHT ARE FOGGED WITH MOISTURE INSIDE."
Best Automotive Parking Light Assemblies
Specification: LED Power: 180W (60 x 3W High Intensity LED). Beam Pattern: Flood Spot Combo Beam. Input Voltage: 9-30V DC (fits 12V, 24V vehicles). Working Lifespan: Over 30,000 hours. Working Temperature: -40~60 degrees Celsius. LED Color Temperature: Pure White 6000K-6500K. Material: 6063 Aluminum Profile, High quality Led Chips, PC Lens. Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive. Before installing this product, please check your state/provincial and local/municipal laws and regulations.If the light bar cannot work, try test the light bar to the power directly, Redline contact to positive of power, black line contact to power negative. WATERPROOF RATE: IP67; waterproof up to 3.3 feet of water for 30 minutes and effectively dustproof..PACKAGE INCLUDE: 1PC 180W LED Light Bar and Mounting Brackets.
Reviews
Find Best Price at Amazon"My Husband is so happy with the Flood Light Bar I purchased for his Jeep."
"Just be careful to angle the unit correctly, you do not want to use it on a two lane highway with car coming, it will blind them."
"Didn't work for me."
"So far they have took a lot a beating and bouncing without failure for about a month.These things are incomparable with the factory lights in the woods at night."
"Super BRIGHT super easy to hook up, I bought 2 more after I bought this one."
"Great. Easy install."
"I threw away my crud Hellas for these, waay better and 1/6 the price!"
"Only used twice, but so far, so good!"
Best Automotive Turn Signal Lights
Philips vision leds are available for brake and taillights, back-up lights, dome lights, glove compartment lights, trunk lights, and license plate lights.
Reviews
Find Best Price at Amazon"Looking at the 7443 socket from above, If you have a standard socket, insert the bulb such that Philips Logo points up with the two ground contacts on the left. Ground Tail. ------------------. Philips Logo. No Logo. ------------------. Ground Brake. If you have CK socket, insert the bulb such that Philips Logo points towards the two ground contacts: Brake Tail. ------------------. No Logo. Philips Logo. ------------------. Ground Ground. I poked at the contacts with a multimeter and 12V power/ground a bunch of different ways and it's extremely interesting to note that you can short either the left two (standard grounds) or the bottom two (CK grounds), and the bulb still functions perfectly, as long as the shorted pins are both grounded. Mean luminosity for each were: Incandescent Tail: 1.47. Incandescent Brake: 4.69. Philips LED Tail: 1.36. Philips LED Brake: 3.03. So in my test, LED came out slightly dimmer overall."
"Bulbs do get hot as pointed out by another reviewer, but so do the regular halogen bulbs."
"i used these on my 2014 Ram as the reverse lights and it was a big difference in the amount of light and how white in color they are compared to the stock 921 bulbs."
"If you have the small reflector tail lights, it might not be as bright as the filament type, as these are all reflected light."
"When the brake is applied, the LED lights are instant on compared to the parcel shelf brake light which has the usual bulb and takes a split second longer to react."
"The most common issue among the LED replacements is that the tail light (low power) mode is too bright and the brake (high power mode) doesn't make much difference. So a slightly orange tinted red is probably another 1-5% safer at night.. Bottom line, these give you the speed, low power usage and presumably, long life of an LED without any of the weird quirks many aftermarket LEDs come with."
"The only issue is that, due to the lower current draw, my car is sensing a lamp failure."