Best Automotive Signal Light Assemblies
Technical specification: power: 72w 24pcs x 3w high intensity Cree leds, operating voltage: dc 9-32v, luminous flux: 5040lm - 7200lm, beam type: 30 degree(spot beam)& 60 degree(flood beam) combo, color temperature: pure white 6000k waterproof rate: ip67 working temperature: -40 - 85 degree centigrade, dimension(with bracket): approx. Apply for Indoor and Outdoor uses, Back up light, Off Road Lighting, Truck, Trailer Interior and Exterior Lighting, Construction Lighting, Garden, Backyard Lighting, Boat Lighting.
Reviews
Find Best Price at Amazon"Pros: - Nice bright 6,000K white light. - Light unit was not hard to mount on the blower housing, just drilled 2 holes. - Power wires plenty long for my use (other than those connected to the light unit). Cons: - No instructions for wiring. I will need to extend the wires back to the mounting point of the blower on the front of the tractor so I can leave them permanently attached along the back of the blower housing and be able to disconnect them from the tractor without a few feet of loose wire to tie up somewhere when the blower isn't mounted. - The wires from power to the light bar wires have female spade connectors but the foot long wires on the light unit are stripped with no connectors provided."
"The mounting brackets should be a bit more universal as had to shim the to keep light level on a curved surface."
"Great light for the money."
"I purchased kawell's 1 leg wiring harness with wireless control."
"Awesome Light for the price."
"So far the quality of this light bar is great."
"Worked perfectly fine for a few months and is now full of moisture."
"INSTALLED ON TRUCK AND EVEN ADDED SILICONE AS I READ ALL THE WARNINGS. THIS TRUCK JUST SAT (DIDNT EVEN DRIVE) AND THREE OF THE EIGHT THAT I BOUGHT ARE FOGGED WITH MOISTURE INSIDE."
Specification: LED Power: 180W (60 x 3W High Intensity LED). Beam Pattern: Flood Spot Combo Beam. Input Voltage: 9-30V DC (fits 12V, 24V vehicles). Working Lifespan: Over 30,000 hours. Working Temperature: -40~60 degrees Celsius. LED Color Temperature: Pure White 6000K-6500K. Material: 6063 Aluminum Profile, High quality Led Chips, PC Lens. Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive. Before installing this product, please check your state/provincial and local/municipal laws and regulations.If the light bar cannot work, try test the light bar to the power directly, Redline contact to positive of power, black line contact to power negative. WATERPROOF RATE: IP67; waterproof up to 3.3 feet of water for 30 minutes and effectively dustproof..PACKAGE INCLUDE: 1PC 180W LED Light Bar and Mounting Brackets.
Reviews
Find Best Price at Amazon"My Husband is so happy with the Flood Light Bar I purchased for his Jeep."
"These lights are pretty bright and make the dark roads look like you're almost driving in the day time."
"BUT, I called the amazon customer service number ( 24hr/7d, 1(888) 280-4331) and she could not find a way to send me hardware so she asked if I'd accept a full refund and keep the light bar. I do plan to seal around the lens and power cord with silicone as it seems moisture is a common weak point."
"Just be careful to angle the unit correctly, you do not want to use it on a two lane highway with car coming, it will blind them."
"This has held up to mud/ dirt and the car washes (with a pressure washer) that follow."
"So far they have took a lot a beating and bouncing without failure for about a month.These things are incomparable with the factory lights in the woods at night."
"Super BRIGHT super easy to hook up, I bought 2 more after I bought this one."
"I threw away my crud Hellas for these, waay better and 1/6 the price!"
Specification: LED Power: 72W (24 x 3W High Intensity LED). Beam Pattern: Flood Spot Combo Beam. Input Voltage: 9-30V DC (fits 12V, 24V vehicles). Working Lifespan: Over 30,000 hours. Working Temperature: -40~85 degrees Celsius. LED Color Temperature: Pure White 6000K-6500K. Material: 6063 Aluminum Alloy Profile, High quality Led Chips, PC Lens. Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive. Before installing this product, please check your state/provincial and local/municipal laws and regulations. BETTER HEAT DISSIPATION: Die-cast aluminum alloy heat sinks effectively dissipate heat, better cooling effect and longer lifespan.
Reviews
Find Best Price at Amazon"Second photo - high beams."
"(I apologize for the poor photos as my phone does not take really great pics) The light bar is extremely bright and works great for his plowing jobs. I appreciate you taking the time to read my review and please select the appropriate button if you found this review helpful or not and leave any comments which may help me write a better review for consumers such as yourself."
"My quad had a high and low beam so I left the low beam and connected these in instead of the high beam."
"On the video, with the Jeep facing the woods, I switched the stock fog lights on first then the low beams then the this light bar then the 20" also from Nilight and finally the hi beams."
"Works fine, very bright but no wiring harness included."
"Great light for its size i use for a back up light on my sxs yes its a over kill for back up light BOYS AND TOYS.This would be great size and brightness for front light on a atv."
"light is bright!"
"Nobody believe how it looks at bottom of my 03 vw new beetle, it gives me a complete white looks at lo beam function."
Best Automotive Back Up Light Assemblies
Specification: LED Power: 18W (6 x 3W High Intensity LED) Beam Pattern: Spot Beam Input Voltage: 9-30V DC (fits 12V, 24V vehicles) Working Lifespan: Over 30,000 hours Working Temperature: -40~85 degrees Celsius LED Color Temperature: Pure White 6000K-6500K Material: Die-cast Aluminum Profile, High quality Led Chips, PC Lens Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive Certifications: CE, FCC and RoHS Applications: Off Road Lighting: Back Up Light, Reversing Light, Jeeps, 4x4, Cars, Motorcycles, ATV, UTV, SUV, Truck, Trailer, Forklift, Trains, Boat, Outdoor Lighting, etc. Other Lighting: Excavator, Dozer, Road Roller, Crane, Tractor, Harvester, Grain Drill, Fire engine, Rescue Vehicle, Camping, Mining, Construction Lighting, etc. FLUSH MOUNT: Flush mount design, effective protection, elegant appearance makes your off-road vehicle looks cool.
Reviews
Find Best Price at Amazon"I Installed these in my 2014 Jeep Wrangler rear bumper and am very happy with the outcome!"
"I mounted these in the toolbox of my truck to light up my bed so I can see when I'm getting gear out or when I'm hooking up to my gooseneck trailer."
"Bought these to install on my MoveBumper that i ordered with precut light holes."
"I installed them in my bumper for reverse lights."
"Very bright.. not high end but not a high end price.. nice and bright."
"I am using these for my reverse lights on my 69 F250."
"Works as described."
"I have a second set that I plan on installing on a different truck and will use silicone on these before installation."
Best Automotive Marker Light Assemblies
Apply for Indoor and Outdoor uses, Back up light, Off Road Lighting, Truck, Trailer Interior and Exterior Lighting, Construction Lighting, Garden, Backyard Lighting, Boat Lighting.
Reviews
Find Best Price at Amazon"Pros: - Nice bright 6,000K white light. - Light unit was not hard to mount on the blower housing, just drilled 2 holes. - Power wires plenty long for my use (other than those connected to the light unit). Cons: - No instructions for wiring. I will need to extend the wires back to the mounting point of the blower on the front of the tractor so I can leave them permanently attached along the back of the blower housing and be able to disconnect them from the tractor without a few feet of loose wire to tie up somewhere when the blower isn't mounted. - The wires from power to the light bar wires have female spade connectors but the foot long wires on the light unit are stripped with no connectors provided."
"The price is great for the quality of this light."
"Great light for the money."
"So far so good, very brite, and went on my RZR 800 front bumper with no problems.. the hardest part was running a bus bar along the firewall and running the wires from my battery to it so that I could hook it up as an accessory.."
"I purchased kawell's 1 leg wiring harness with wireless control."
"Awesome Light for the price."
"Worked perfectly fine for a few months and is now full of moisture."
"INSTALLED ON TRUCK AND EVEN ADDED SILICONE AS I READ ALL THE WARNINGS. THIS TRUCK JUST SAT (DIDNT EVEN DRIVE) AND THREE OF THE EIGHT THAT I BOUGHT ARE FOGGED WITH MOISTURE INSIDE."
Best Automotive Parking Light Assemblies
Specification: LED Power: 180W (60 x 3W High Intensity LED). Beam Pattern: Flood Spot Combo Beam. Input Voltage: 9-30V DC (fits 12V, 24V vehicles). Working Lifespan: Over 30,000 hours. Working Temperature: -40~60 degrees Celsius. LED Color Temperature: Pure White 6000K-6500K. Material: 6063 Aluminum Profile, High quality Led Chips, PC Lens. Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive. Before installing this product, please check your state/provincial and local/municipal laws and regulations.If the light bar cannot work, try test the light bar to the power directly, Redline contact to positive of power, black line contact to power negative. WATERPROOF RATE: IP67; waterproof up to 3.3 feet of water for 30 minutes and effectively dustproof..PACKAGE INCLUDE: 1PC 180W LED Light Bar and Mounting Brackets.
Reviews
Find Best Price at Amazon"My Husband is so happy with the Flood Light Bar I purchased for his Jeep."
"Just be careful to angle the unit correctly, you do not want to use it on a two lane highway with car coming, it will blind them."
"Didn't work for me."
"So far they have took a lot a beating and bouncing without failure for about a month.These things are incomparable with the factory lights in the woods at night."
"Super BRIGHT super easy to hook up, I bought 2 more after I bought this one."
"Great. Easy install."
"I threw away my crud Hellas for these, waay better and 1/6 the price!"
"Only used twice, but so far, so good!"
Best Automotive Turn Signal Lights
Philips vision leds are available for brake and taillights, back-up lights, dome lights, glove compartment lights, trunk lights, and license plate lights.
Reviews
Find Best Price at Amazon"Looking at the 7443 socket from above, If you have a standard socket, insert the bulb such that Philips Logo points up with the two ground contacts on the left. Ground Tail. ------------------. Philips Logo. No Logo. ------------------. Ground Brake. If you have CK socket, insert the bulb such that Philips Logo points towards the two ground contacts: Brake Tail. ------------------. No Logo. Philips Logo. ------------------. Ground Ground. I poked at the contacts with a multimeter and 12V power/ground a bunch of different ways and it's extremely interesting to note that you can short either the left two (standard grounds) or the bottom two (CK grounds), and the bulb still functions perfectly, as long as the shorted pins are both grounded. Mean luminosity for each were: Incandescent Tail: 1.47. Incandescent Brake: 4.69. Philips LED Tail: 1.36. Philips LED Brake: 3.03. So in my test, LED came out slightly dimmer overall."
"Bulbs do get hot as pointed out by another reviewer, but so do the regular halogen bulbs."
"i used these on my 2014 Ram as the reverse lights and it was a big difference in the amount of light and how white in color they are compared to the stock 921 bulbs."
"If you have the small reflector tail lights, it might not be as bright as the filament type, as these are all reflected light."
"When the brake is applied, the LED lights are instant on compared to the parcel shelf brake light which has the usual bulb and takes a split second longer to react."
"The most common issue among the LED replacements is that the tail light (low power) mode is too bright and the brake (high power mode) doesn't make much difference. So a slightly orange tinted red is probably another 1-5% safer at night.. Bottom line, these give you the speed, low power usage and presumably, long life of an LED without any of the weird quirks many aftermarket LEDs come with."
"The only issue is that, due to the lower current draw, my car is sensing a lamp failure."
Best Automotive Brake & Tail Light Assemblies
Package Including 2 x 10cm LED strip (6LED lights in each). 4X 20cm LED strip (12LED lights in each). 2X 30cm LED Strip (18LED lights in each). 1 x Wireless key Remote Control. 1 X remote control (15 color). 1 x motorcycle strip light. ★( Pack of 8) 8pcs Motorcycle Mult-Color RGB Remote Flexible Strip Light Kit for Motorcycle Million colors!2 x 3.94" 6LED strip+ 4 X 7.88" 12LEDstrip+ 2 X 11.82" 18LED LED Strip) ; Utilizing super bright RGB 5050 SMD LED. Different sizes fit for diffrerent place on your motorcycle, strips can also be cut to size. ★Fitment: Universal fit all Motorcycle Car ATV SUV JEEP Bike Vans Trucks with DC 12V power.Special design for motorcycle such as Harley Davidson Touring Kawasaki Suzuki Ducati Can AM Polaris KTM BMW Honda CBR Toyoda Sportster Yamaha Bike.
Reviews
Find Best Price at Amazon"The cables it comes with are pretty long but if you put lights at the front and the back of the bike you'll need longer cables."
"The colors are bright, remote works well. The one down side is no clear instructions for the remote, and the install diagram is just pictures, no words."
"Good product nice and bright."
"So far so good."
"However one word of warning, cover your bike in the rain or put the control box somewhere where it won't get soaked, as it may malfunction if it is."
"These are the lights for you."
"Make sure you order an extension cable wire."
"I absolutely like the way they turned out...all lights are working...i installed it by myself it was very easy to follow the manual..i love this lights on my motorcycle...thumbs up..i recommend this to those who have motorcycle...😊."
Best Automotive Headlight Assemblies & Parts
Features 3M abrasive technology and a polishing compound to restore hazy and dull headlight lenses, as well as other plastic lens surfaces on your vehicle. System is intended to restore two headlight lenses.
Reviews
Find Best Price at Amazon"Having come into possession of two different products for auto headlight restoration, I thought I would try a head to head comparison, The two products are the 3M Headlight Restoration System (PN 39008) and the Meguiar's Perfect Clarity Headlight Restoration Two Step Kit (hereafter know as Meguiar's)."
"I am the type of buyer who does a lot of research before pulling the trigger on a purchase and the case of buying a headlight restoration kit was no exception. I couldn't for the life of me figure out the difference int he kits, so I went with the cheapest, the 3M 39008 Headlight Lens Restoration System. 3M headlight lens polish sample. - The 3M 39014 Lens Renewal Kit includes all the above plus: 1 - 3M Masking Tape PN 0000 25 ft. - The 3M 39045 Lens Renewal Kit with Protectant includes all of the above plus: 1 - Container of protectant formula. I had making tape, so no biggie there, and I just used a high quality automotive wax on the lenses when I was done, so I didn't need the 3M "Protectant formula". I would say the lights came out at 99-100% I'm not sure what those who wrote negative reviews were doing wrong, but if you follow the directions and take your time, the results are great. - Finish up with a nice high quality wax on the lens to protect your work!"
"If they sold a refill kit of the sanding disks, this kit could be used again."
"I used the rubbing compound and sponge attachment to get rid of the haze on my wife's 6 year old car headlights."
"There is a lot of elbow grease involved, so if you're not into the idea of putting in an hour or two of sanding (depending on your car's headlight size), this isn't for you."
Best Automotive Driving, Fog & Spot Light Assemblies
Philips CrystalVision ultra is for drivers seeking to personalize their vehicles. Choose Philips CrystalVision ultra headlight bulbs for the look of HID and get 4000K bright white light on the road. Always replace in pairs to ensure a symmetric light beam from both bulbs on the road.
Reviews
Find Best Price at Amazon"These bulbs were a perfect replacement for the stock bulbs in my 2012 Chrysler 300 C. The stock bulbs were very dim and yellow leaving me straining a bit to see the road at night especially with oncoming traffic head lights. The photos show how they look at night on low beam with the stock fog lights (which add a little bit of yellow color)."
"Quite a bit whiter than stock headlight on 2016 Canyon with just a hint of yellow still."
"but the light says its supposed to be clear white but my car still has a yellow hue to it."
"Product arrived perfectly, was a bit of a pain to get in my headlights but that is mostly a Chrysler issue than the actual product."
"So far so good."
"Def not that yellow tint / hue like standard headlamp bulbs, but no one will mistake your headlights for HIDs for sure (despite the blue tint on the bulb, they still display an off white)."
"I didn't buy them for the increased output, I just hate "yellowish" headlight color."
"Update as of 12/30/2016: Unfortunately, one of these bulbs has just burned out, a ridiculously poor lifespan of just 6 months."