Koncocoo

Best Automotive Replacement Engine Lifters

Genuine GM 12571609 Valve Lifter
Genuine GM 12571609 Valve Lifter. Enter your model number to make sure this fits.
Reviews
"This comes with the gasket and a small filter screen for the oil pressure sensor."
"After getting a collapsed AFM valve lifter in my wife's 2007 Tahoe, we ordered this VLOM along with full valve lifter kit."
"Lifter job on an 07 Tahoe."
"So if you start getting low oil pressure it's probably the screen under the sender."
"perfect match engine runs beautiful."
"changed it with lifter package and vehicle runs better than before."
"I was able to clean my VLOM with Air Pressure."
Find Best Price at Amazon
(16) Ford 6.0L 6.4L 7.3L Powerstroke Diesel Roller Valve Lifter Set of (16) 2001-2010
Elgin Industries OE replacement set of sixteen (16) hydraulic roller valve lifters for Ford and GM diesels. Enter your model number to make sure this fits.
Reviews
"Great deal much better than the dealer and these are OEM."
Find Best Price at Amazon
Mercedes w203 c230 SEAL Camshaft Adjuster Magnet L+R (x2 seals) o-ring
Enter your model number to make sure this fits.
Reviews
"Fast delivery, perfect size."
"Great product."
Find Best Price at Amazon

Best Automotive Replacement Engine Rev Limiters

MSD 8728 Soft Touch Rev Limiter
The soft touch rev control, PN 8728, is designed to be used on standard points ignition or inductive ignition systems. Enter your model number to make sure this fits.
Reviews
"Very happy with my purchase."
Find Best Price at Amazon

Best Automotive Replacement Engine Mounts

RotopaX RX-LOX-PM Pack Mount Lock
Rotopax LOX (Locking) Pack Mount. Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the to.
Reviews
"They work great."
"Gives peace of mind knowing the jack is secure."
"I used this in conjunction with the spare tire bracket for a jeep, and it provides a solid mount for RotopaX containers."
"If you add much of anything under the base the bolts will be too short."
"This has been great to hold the fuel tank outside my car safely and securely people welcome to have my gas which I normally don't carry inless straight to a customer for my emergency road service other than that I like it where you can lock it there's no way you can get it."
"Works great, never have to worry about anyone steeling my gas cans off my trailer any more."
"It happened while hand tightening....a large piece of metal fell out and basically made threading the bolt in impossible."
"Easy to install however the lock seized."
Find Best Price at Amazon

Best Automotive Replacement Engine Cam & Lifter Kits

GM Parts 12499225 Hydraulic Roller Lifter for GM LS Series, Pack of 16
GM 12499225. Enter your model number to make sure this fits.
Reviews
"I tried the engine flush, and brake clean down the push tube tricks, but it didnt work so i had to replace the lifters,These have a bigger oil hole than the stock ones, only have about 300 miles on them at time of this review but they are working good."
"These are LS7 lifters, great quality and they get rid of the GM 5.3 tick."
"This is a set of #16 lifters (AC Delco); Correct GM replacements for Vortec 5.7 (L31) engine; Flat shoulder around the roller; Original lifters have slope-shoulder, providing more clearance for cam lobe, unnecessary for near stock application (."
"Don't recommend with cams with over a .620 lift as I had a friend to have two sets fail within a year."
"The new LS engine lifters."
"Very well made and a good price."
"Brand new ls7 lifters working great."
"These are true LS7 lifters bought in bulk and resold by another company."
Find Best Price at Amazon

Best Automotive Replacement Engine Push Rods

S&S Cycle Adjustable Pushrods Kit 93-5095
For Twin Cam motors. High quality pushrods and lifter kit. Includes everything to convert stock pushrods to adjustable. Kits includes pushrods, covers, retainer clips, gaskets and O-rings. Pushrods are manufactured from rigid chrome moly steel tubing. Kits includes pushrods, covers, retainer clips, gaskets and O-rings.
Reviews
"Nice kit, wish I would have taken off my tank and rocker boxes instead of cutting my stock pushrods in hind sight, but the adjustable pushrods hold adjustment and will work for any cam profile."
"Other than those two small items, they worked great."
"Don't throw away your old pushrods before you completely install these."
"Came with everything I needed and The trusted S&S name."
"I can't say I know a lot about performance upgrades."
"Thought the gaskets were missing but found them packed in the cardboard."
"easy install and works great."
"I ordered these for my dyna twin cam dyna and after installing them and a new set if lifters from hi lift Johnson I could not get them to adjust properly and after a month if not being able to fix the noise they were making I had to take my bike to a local shop and was told these were for a Evo motor now I have to spend more money in a new set and maybe a new set of lifters."
Find Best Price at Amazon

Best Automotive Replacement Engine Valve Covers

Edelbrock 1223 Pro-Flo Black Finish 3" Round Air Filter Element with 14" Diameter
Edelbrock triple chrome-plated round air cleaners work with all popular 5-1/8" diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadrajet and Carter AFB). Enter your model number to make sure this fits.
Reviews
"The bottom had a slightly different offset than my old one so i was lucky to have the needed clearance."
"Fit great, 86 sb Chevy 350 with stock Rochester carb."
"Fits perfect, looks great."
"Looks very good on the old girl."
"The only thing I wanna bring up is mine did NOT come with the crankcase breather tube piece (The chrome pieces in the picture)."
"Slapped this on a 89 mazda b2200 - since apparently everyone who owns these wants to take the air cleaner off."
"Nice air cleaner, fits perfectly on my edelbrock 1404."
Find Best Price at Amazon

Best Automotive Replacement Engine Crankshafts

OTC (6475) Crankshaft TDC Timing Pin for Ford
The OTC 6475, cam tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs. 1997 - 2002 Ford Contour/Mercury Mystique with 2.0L 4 cyl DOHC Zetec engine with variable cam timing.
Reviews
"This was my first time doing this job, changing a timing belt, I was able to complete the job without using this tool."
"OTC makes good stuff and this little pin saves me from any guesswork when I'm timing my SVT."
"After fussing with the timing belt on a Zetec engine, I bought this and it made the job much easier."
"I ordered this no realizing you could just place one of the factory bolt in the loaction and it would hold just as well."
"Tool is for holding crankshaft in place while changing the timing belt."
"Just used to change timing belt on my 02 focus with 2.0 zetec."
"Just what I was needing to do my timing belt, already had cam tool, great price and super fast delivery."
Find Best Price at Amazon

Best Automotive Replacement Engine Thrust Washers

ACL 2T8103-STD Thrust Washer
ACL Toyota/Lexus 2JZGE/2JZGTE 3.0L Standard Size Thrust Washers. Enter your model number to make sure this fits.
Find Best Price at Amazon

Best Automotive Replacement Engine Superchargers

Cravenspeed Supercharger Pulley 15% Reduction
CravenSpeed's supercharger pulleys are machined to a specific reduction of the original equipment on your MINI's supercharger. It is widely accepted that these sizes are safe amount of reduction on this particular supercharger. Faster spin increases boost.
Reviews
"One thing I want to note, if you are doing this mod, it is extremely recommeded to get a colder spark plug: https://www.amazon.com/gp/product/B001B6VUQK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1. Also, I would strongly recommend using the designated puller even if it is costly: https://www.amazon.com/Cravenspeed-Quick-Puller-Pulley-removal/dp/B00X4MUJ2K/ref=sr_1_15?s=automotive&ie=UTF8&qid=1469471858&sr=1-15&keywords=cravenspeed."
"I installed this on my 05 Mini Cooper S with the Gates K060535 Belt and wow does it pull and wine. The link to the belt so there is no slack https://www.amazon.com/dp/B000C2SIXC/ref=cm_sw_r_cp_api_-r-HxbPB0EVC0."
"The only thing is the pulley has 4 hex bolts and the online instructions refer to 3 hex bolts that need to be tightened to 85lbs torque."
"I installed this and my Mini feels like a different machine."
"I hear the supercharger whine now even with the stock intake."
"All I can say is "HOLY COW" this pulley really woke up my wife's 2004 Cooper S!"
"No better pulley for the Mini Cooper."
"Item is as advertised, works well & arrived is short time."
Find Best Price at Amazon

Best Automotive Replacement Engine Turbochargers

GooDeal Turbo Wastegate Control Solenoid 4036054 for 04.5-07 Dodge Cummins 5.9L
Package Include: 1 x Turbo Wastegate Control Solenoid as pictured.
Reviews
"One even wanted more than $450 ( I can't remember the exact price)."
"Thanks for a reasonably priced replacement vs OEM."
"My sensor had the wires broken/corroded off the top too close to sensor to be fixed."
"Got just what we ordered and needed."
"FYI, the placement of the turbo and this solenoid must be in a low air pressure zone when driving, I rarely if ever use my truck in snow/salt conditions, but the turbo and solenoid were corroded like it was constantly exposed to a salt environment."
Find Best Price at Amazon

Best Automotive Replacement Engine Timing Parts

Aisin TKT-021 Engine Timing Belt Kit with Water Pump
Advanced technological design produces smooth coolant flow channels, efficient rotors, ball bearings, and carbon ceramic mechanical sealing for optimum cooling performance and longevity. AISIN OE, NTN OE or Korean Hydraulic Tensioner in select applications.
Reviews
"I checked quite a few online stores that sold Toyota OEM parts, and purchased separately, the best price I could get for everything included in this kit was about $400. Both bearings are Koyo branded (the same used by Toyota), the water pump is Aisin (same used by Toyota), the hydraulic tensioner is NTN (same used by Toyota) and the timing belt is Mitsuboshi....you guessed it, same as used by Toyota. Tube. This kit even includes a very nice booklet with directions on how to perform the timing belt replacement."
"TB maintenance was done on 2004 Sequoia with 187,000 miles, on what appeared to be the original timing belt, water pump, and TB components. Very complete kit, and OEM quality without paying dealer prices. A few thoughts on this job that you might want to consider if you're diving in for the first time ... consider replacing thermostat while everything is apart."
"Husband bought this for my 07 Sequioa and replaced along with the serpentine belt, thermostat and gasket."
"I installed this on my 2008 Toyota Tundra 4.7L Double Cab with 108k miles."
"I was very impressed with this kit."
"I think it's just a waste of money to not have it changed for this kind of big and expensive job."
"This kit did not come with the rectangular gasket for the water pump shown in the product photo."
"My 2nd purchase of this kit and includes everything I needed to rebuild my 01 GS430 3UZFE."
Find Best Price at Amazon

Best Automotive Replacement Engine Cam Bearings

Allstar ALL96470 Engine Cam Bearing Installation Tool
Allstar Engine Cam Bearing Installation Tool features an engine cam bearing installation tool. Enter your model number to make sure this fits.
Reviews
"I bought this to install cam bearings on my 1965 326 Pontiac V8."
"Yet to send the block off for boring, but I'm sure the bearings will go in just as easy."
"this tool accually mars up the bearings as installing not recomended removal is good."
"No instructions are included , which is the only reason I didn't give it 5 stars."
"I ended up using this as a hammer extension to smash out the old bearings and then just used the alignment side of the tool and electrical tape to center the bearing but that failed misribly ....."
"It looks like it could be adapted to work on others, but fitment is only for certain vehicles."
Find Best Price at Amazon

Best Automotive Replacement Engine Roller Rockers

Proform 66878 Extruded Aluminum Roller-Rocker Arm
Proform 66878 Extruded Alum Pedestal Mnt Roller-Rkrs. Enter your model number to make sure this fits.
Find Best Price at Amazon

Best Automotive Replacement Engine Main Bearings

ACL 5M8309H-STD Main Bearing Set
ACL Subaru EJ20/EJ22/EJ25 (For Thrust in #5 Position) Standard Size High Performance Main Bearing Se. Enter your model number to make sure this fits.
Reviews
"Always had great experience with these bearings on Subaru EJ20/EJ25 rebuilds."
"great bearings can take a beating."
"So far so good, 8k down no issues."
"Best bearings available for a Subaru."
Find Best Price at Amazon

Best Automotive Replacement Engine Woodruff Keys

Steel Woodruff Key Assortment (250 Pieces), Zinc Plated Finish, Inch, With Case
The 250-piece zinc plated steel Woodruff key assortment includes Woodruff keys in various sizes and comes in a compartmented plastic case for storage and organization.
Reviews
"It is US made key assortment, so you get exactly what you paid for...quality parts!"
"Just what the doctor ordered so to speak, good selection and the quality seems to be just fine."
"good selection to have on hand for those once in awhile needs."
"This was a bit pricey, but the alternative was to buy 50 of one size for about $15."
"its helpful ONLY IF they have your size in the whole lot that is in there."
"Nice little stainless steel container with cotton string."
Find Best Price at Amazon

Best Automotive Replacement Engine Torque Struts

Eagle BHP 1452 Front Engine Motor Mount (Toyota Camry Torque 2.4L)
Position: Torque Front Engine Motor Mount. Free Expedited Shipping - Same day shipping when purchased before 2:00 pm EST.
Reviews
"A little bit of (real gentle) levering with a crowbar or tire iron is all that was required here to line up the mount with the engine and frame."
"Great quality replacement for upper engine mount on a 2002 Toyota Camry with a 2.4L."
"Bolted right on, quality looks as good or better than the OEM."
"Seemed a little cheap."
"Easy install , took only 5 minutes."
"So far so good."
"Fit perfectly on 2006 Camry."
"Does the job."
Find Best Price at Amazon

Best Automotive Replacement Engine Cylinder Heads

ARP 2474202 Stud Kit
Dodge Cummins 5.9L 24V 98 & UP head stud kitIncludes 12-point nuts. Enter your model number to make sure this fits.
Reviews
"For those who are replacing a failed head gasket, Cummins makes an Upper Engine Gasket Kit which has all the gaskets you'll need."
"Awesome stud kit...perfect fit."
"I bought these because I blew the head gasket in my 08 cummins and I wanted to make sure it didn't happen again."
"Ok they fit perfect on my 99 did factory torque then stepd to 100 ft lbs then did the final 125 ft lbs but not sure if i have to re torque can anyone tell me if i have to retorque."
"AWESOME Product."
"Great product, fit truck as described, and arrived on time."
Find Best Price at Amazon

Best Automotive Replacement Engine Oil Restrictors

Power Stop K2445 Rear Z23 Evolution Brake Kit with Drilled/Slotted Rotors and Ceramic Brake Pads
Power Stop brake kits include a complete set of cross-drilled and slotted rotors and high performance evolution ceramic pads. Two rear rotors and rear brake pads included.
Reviews
"I drove through mountains, along the coast of an ocean, through rain storms, and through car washes. The installation is the same as any other rotor pad combo EXCEPT that you need to pay attention to what side the rotor goes on."
"Work great on my 2011 Titan SV."
"I had installed these rotors and pads for the front of my truck about 5 years ago, and I finally got around to change out the rear to these as well."
"I had everything changed and started reassembling when I realized that one of the rotors was drilled for a 5 lug instead of a 6 lug."
"A nice addition for a truck that is used hard for work as a Wildland Firefighting vehicle."
"Fast shipping product as specified installed over the weekend, alot of brake pad I didn't pick-up the truck pads knowing I only tow 2-3x a month for the money great deal.. side note, be sure too break-in per instructions this pad & rotor combo."
"Oddly it was cheaper to buy the front and rear kits separately the to buy the 4 wheel kit."
"When towing heavy found reduced brake fad."
Find Best Price at Amazon

Best Automotive Replacement Engine Valves & Parts

[2 Pcs] Intake + Exhaust Camshaft Position Actuator Solenoids For GM Chevy Malibu HHR Buick Pontiac 2.0L 2.2L 2.4L 917216 917215 [USA Warehouse]
To make sure our customer buy the correct part, please CONFIRM the OEM PART NUMBER. Fit for: 2005-2010 Cobalt. 2009-2012 Chevy Malibu. 2010-2014 Equinox. 2008 Malibu with the new body style. 2007-2010 Pontiac G5. 2006-2010 Pontiac G6. 2006-2010 Pontiac Solstice. 2010-2013 Buick Lacrosse. 2011-2013 Buick Regal. 2006-2011 Chevy HHR. 2010-2013 GMC Terrain. Installation Instructions For Buick (picture instructions are above): Step 1: Prepare a 10mm spanner and a flat screwdriver, remove the engine cover, intake and exhaust solenoid valves are obvious. Reference opinions from Customer reviews: 1.Fixed codes P0010 and P0011. Enter your model number to make sure this fits.
Reviews
"These work great."
"I started car and code was gone after installing parts ."
"THE SOLENOIDS WORK PERFECTLY, DASH LIGHT WENT OUT ,THANK YOU!"
"After pulling the codes I did the research and knew the place to start was these camshaft position actuator solenoids."
"Very satisfied with this product."
"Had the P0010 and P0011 codes on my wife’s 11 HHR with the 2.4, car was dodgy and struggled at idle. The Intake + Exhaust Camshaft Position Actuator Solenoids arrived very well packaged and on time."
"The exhaust solenoid was intermittently throwing a P0013 code."
"After install, I cleared the fault code, and so far has not returned in a few hundred miles of all kinds of driving conditions."
Find Best Price at Amazon

Best Automotive Replacement Engine Head Bolt Sets

PartSquare 1999-2006 Audi A4 TT Volkswagen Beetle 1.8L Turbo DOHC Head Gasket Bolts Kit
EH16521 99-06 Audi Volkswagen 1.8L Turbo Cylinder Head Gasket Set + Bolts Kit. Engine Code : ARZ, AVC, AWU, AGU, AUM, AUQ, AWC, AWT,AWD,AWW,AWP,AMB,ATC. 00 - 06 VW GOLF 1.8T TURBO DOHC 20V AGU, ARZ, AUM, AUQ. 00 - 05 VW JETTA 1.8T TURBO DOHC 20V AWD, AWW, AWP. 00 - 06 AUDI TT QUATTRO 1.8T TURBO DOHC 20V ATC, AMU, AWP. Interchange Part Number: HS26182PT, ES71193 HS9018, HB9018L EH16521HB-1 HSSB018, HSSB018L, SL1000 Head Gasket Bolts Set.
Reviews
"This kit has everything to do a head replacement."
Find Best Price at Amazon

Best Automotive Replacement Engine Pistons & Parts

Proform 66785 Piston Ring Filer Manual
HandPiston Ring Filer Mount the filer to your work bench, position the ring against the stops, and crank the wheel. Enter your model number to make sure this fits.
Reviews
"Don't be fooled, you'll have to put in some time and energy in using this, but the product does exactly what it promises for a lot less money than the automatic setups."
"I recently rebuilt my Porsche engine and needed a ring filer to get the ring gap correct."
"Has a rougher disc than I prefer, but other than that good."
"I needed an inexpensive tool to gap my piston rings for my Model A project car."
"it supposed to be for bigger piston rings."
Find Best Price at Amazon

Best Automotive Replacement Engine Oil Drain Plugs

Honda 94109-14000 Oil Drain Plug Gasket Pack of 50
Honda OEM Replacement crush washer. Fits all Honda oil pan drain plugs.
Reviews
"Comparing them side-by-side with a washer obtained from a dealership parts dept, these are exactly the same O.D., I.D., thickness, weight (on a postal scale), and density ("crush" the same when installed). If you ever bought a filter and washer from a Honda dealership, I'll bet the parts guy simply grabbed a washer loose from a box and taped it to the filter."
"I actually bought ones that came in the generic zip lock bags and bought some that came in the heat sealed bags with red Honda label."
"These work perfectly on my 2009 CR-V and my son's 2014 Odyssey."
"Factory original drain plug gaskets at a good price."
"good product and the price is right for the amount of gaskets you get."
"They look a bit different than the ones I replaced."
"This is a great deal on these oil drain plugs for my honda vehicles."
"Received 50 in single small ziplock sitckon label without Honda logo."
Find Best Price at Amazon

Best Automotive Replacement Engine Push Rod Tubes

EMPI 00-4109-0 EMP VW Hi-Performance Aluminum Push Rod Tubes, Set of 8
These billet aluminum push rod tubes have been designed to the specific requirements of hi-performance engine building. dual viton o-ring seals between the tubes stock type end seals.
Reviews
"This product is incomplete and lacks good installation instructions, but it is still one of the better push rod tubes you can buy."
"worked GREAT!!!"
"Excellent Recommended 100%."
"Part's were great Thank's."
"O-rings are pretty tight had to leave them up well prior to installing been using for over a year now no leaks good product."
"Very hard to get the pushrod tubes in place."
"I GOT THE NEW PUSHRODS AND PUT SOME 3 IN ONE OIL AROUND THE RUBBER O-RINGS AND ASSEMBLED ALLTHE PUSH ROD TUBES TO DO THE JOB THE NEXT DAY,,,NEXT DAY I TRIED TO SEE HOW THEY COMPRESSED AND EXPANDED,,,IT WAS LOCKED IN POSITION,,,COULDN'T EXPAND OR CONTRACT THE PUSH ROD TUBE,,,THE ONLY WAY I COULD GET THEM TO WORK WAS TO TAKE CHANELE LOCK PLIRES AT EACH END AND TWIST THEM AND IT FINALLY LET LOOSE,,,THEY WERE ALSO TOO LONG AND I HAD TO CUT OFF ONE QUARTER OF AN INCH OFF TO GET THEM TO FIT BETWEEN MY ENGINE HEAD AND THE ENGINE CASE,,,,ONCE I GOT THEM IN ANDTWISTED THEM TO MAKE THEM EXPAND THEY WERE OK FOR A COUPLE OF RUNS DOWN THE STREET,,,THEY LEAKED A LITTLE KINDA LIKE THE ONES I JUST REPLACED...I WENT FOR A RIDE ONE NIGHT AND THE NEXT DAY I WENT OUT TO MY GARAGE AND THERE WAS A TWO FOOT BY TWO FOOT OIL LEAK,,,,,,,,,THE ONLY THING I CAN THINK COULD OF HAPPENED IS WHEN THE ENGINE HEATED UP IT COMPRESSED THE TUBE,,,AND WHEN IT COOLED DOWN THAT THEY DIDN'T EXPAND LIKE THEY WERE SUPOSED TO AND LEFT A BIG GAP WHERE IT WAS SUPOSE TO EXPAND AND KEEP IT SEALED,,,SO NOW I'M GOING TO TAKE OFF THE VALVE COVER AND TAKE OFF THE ROCKER ARMS AND TAKE OUT THE PUSH RODS AND TAKE OUT THE PUSH ROD TUBES AND SEE IF I CAN GET THEM TO LOOSEN UP AND DO WHAT THEY WERE SUPOSE TO DO,,,,,,,,,,,,,,,,,,,OILY MESS IN OHIO,,,,,,,,,,L.SIMMS ,,,,,,937 258 3794,,,,IF YOU HAVE ANY IDEAS."
Find Best Price at Amazon

Best Automotive Replacement Engine Expansion Plugs

Dorman 555-104 Steel Cup Expansion Plug - 34.3mm, (Pack of 10)
Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. Enter your model number to make sure this fits.
Reviews
"Excellent service, excellent product..."
"Works great on my engines."
"perfect fit for the project I was working on."
"Perfect fit for 90 camaro with 3.1."
"Good price and will serve the purpose they are built for."
"NOt as good as American freeze plugs, seem softer, but works for solvent traps."
Find Best Price at Amazon

Best Automotive Replacement Engine Harmonic Balancers

OTC 6667 Harmonic Damper Puller
This puller fits the following applications: virtually all Chrysler and Mitsubishi vehicles (same as P/N 6267 but with updated applications), 4.2L I6 Trailblazer, Envoy and Bravada 2003 - current, 4.2L I6 Rainier 2004 - current, 3.5L I5 Colorado and Canyon 2004 - current, 3.5L I5 Hummer H3 2006 - current, 2.8L I4 Colorado and Canyon 2005 - current. Fits into tight engine compartments, no need to remove radiator.
Reviews
"I suggest also heating up the pulley because it was binding pretty badly at room temperature, but even hot I still needed an impact gun for it to budge."
"If you're trying to remove a 04-05 F150 5.4 triton harmonic damper you will need the 3 bolt style puller no matter what the forums say."
"Sears has a great $150 puller, but it only works on the truck balancers. Not sure all the applications it works on, but if it works for your needs it is a great puller."
"If you have a harmonic balancer on a GM late model engine this works great."
"2006 Avalanche Z-71. GEN III 5.3L L59 Z VIN FLEX. Was EXACTLY what I needed."
"You will not be disappointed with this tool and it will probably come in handy for future projects given the different sized rods that are included."
"Like every OTC tool I've owned."
"it worked well for the removal, however, one of the rods bent on me."
Find Best Price at Amazon

Best Automotive Replacement Engine Camshafts & Parts

BMW DUAL VANOS O-Ring Seal Repair Kit E36 E39 E46 E53 E60 E83 E85 M52tu M54 M56
Stage 1 Vanos Seal Kit Designed specifically for the M52tu, M54 and M56 engines 6-cyl engines (Years 1998-2006) 3-series: E36 Z3 1998-2002 & E46 1998-2005 5-series: E39 1999-2003 & E60/E61 2002-2005 7-series: E38 1998-2001 & E65/E66 2002-2005 Z4 E85 2002-2005 // X3 E83 2003-2006 // X5 E53 2000-2006. Gasket - Vanos/Camshaft Cover on Cylinder Head 11361433817 and Vanos Unit Piston Housing Seals When you disassemble the vanos unit to replace the piston seals there is a metal seal between the housing and the covers that bolt to the housing.
Reviews
"If you have bearings problem, i recommend getting the other kit."
"I had exactly 100k miles on my original vanos seals and this kit made my car feel much better and less sluggish."
"Didn't really have a VANOS problem but replaced anyway when I did the valve cover gasket."
"No leaks yet with my many miles of high speed driving .. Good Seal Brand."
"Fits perfect for my 2002 BMW 330ci Conv."
"awesome works perfect and great price."
"It's a perfect fit in my 2001 330ci m54 motor and everything fit to oem specs and it's a must if your working on your vanos."
"Kit does not come with vanos blind covers or seals 11361433513."
Find Best Price at Amazon

Best Automotive Replacement Engine Dipsticks & Tubes

Ford 3C3Z-6750-AA Engine Oil Dipstick (6.0L Diesel F-Super Duty/EXCURSION 03 05 06)
Ford genuine parts is the exact original equipment manufacturer (OEM) part that your vehicle came with. Enter your model number to make sure this fits.
Reviews
"Does come curled up in a circle, but was very easy to straighten out."
"My first one broke at seven years and ironically the second just broke at 14 years."
"Great product exactly same as factory, I replaced my old one which had broke off at handle."
"Received it item is in original oem packing fits perfect to the truxk."
"Just like I ordered to replace broken OEM part."
"I believe it is an original replacement part."
"Great product, worked great."
Find Best Price at Amazon

Best Automotive Replacement Engine Oil Pumps & Parts

Melling M360 Oil Pump for Ford 5.4L Modular Engine
Melling oil pumps are manufactured from high quality materials in either cast iron or cast aluminum as specified by the OEM engine manufacturer. Enter your model number to make sure this fits.
Reviews
"I installed this at the same time as replacing the complete timing set, camshaft phasers, variable valve timing solenoids, and all 24 hydraulic lash adjusters and all 24 rocker arms."
"Pump was very high quality and matched the size of the original FoMoCo pump perfectly. In particular the fitment of the pump all the way on the crank was very difficult to achieve, especially hanging upside down from the top of the radiator. My pump WOULD NOT PRIME with simply cranking the engine with the crank sensor disconnected. I did pre-oil pump, but perhaps packing with assembly lube might have been better."
"Installed this pump when doing Phasers and timing chains."
"Replaced all timing components on my 2010 F150 3v 5.4, figured it would be a good idea to drop a new oil pump in while I had the front cover off."
"Of course getting to it in the engine is another matter, but this melling oil pump is pretty awesome now that it's replaced the OEM pump at 213K miles."
"this oil pump was recommended to me by ford dealer techs over the oem oil pumps."
"Melting always makes a quality product ...what more is there to say."
"This is the cure for low oil pressure as long as your engine is not worn out."
Find Best Price at Amazon

Best Automotive Replacement Engine Crankshaft Pulleys

Bapmic 11237525135 Engine Crankshaft Pulley for Mini Cooper S R52 R53
As a Distributor and Service Provider of Auto Parts, the Wide Products Range from Chassis & Suspension, Engine Components, Auto Transmission Parts and Electric Parts. Bapmic Will Make Continuous Efforts to Provide High Quality Products and Services to Our Customers. Perfect Match for the Original Car.Please verify Fitment or Application.
Reviews
"Working well on a 02 r53."
Find Best Price at Amazon

Best Automotive Replacement Engine Main Bolts & Studs

ARP 2504202 Stud Kit
Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned, something that won't happen with inferior quality head studs. ARP studs are thread rolled after heat treat, which gives them about 1000 Percent (that's ten times) better fatigue strength than those studs that are threaded prior to heat treat. This procedure (done only to the shorter studs) more equalizes the "stretch" of both studs, which makes for a more consistent clamping force and one that compensates for head gasket compression when the cylinder heads are installed. Thread Rolled After Heat Treat, Which Gives Them About Ten Times Better Fatigue Strength Than Those Studs That Are Threaded Prior To Heat Treat.
Reviews
"With the problems that plague the Ford 6.0L diesel power plant, when it came time to repair the inevitable head gasket failure, installing these ARP head studs was an absolute necessity."
"This product is the reason why many of the 6.0L trucks are still on the road."
"I did remove cab and heads and had the heads checked."
"A must for the Powerstroke 6.0."
Find Best Price at Amazon