Best Automotive Replacement Power Window Motors
Lomanco motor comes with universal mounting kit to replace the flat plate (with 3 mounting holes). If your motor mounts with a belly band around the motor (5" diameter motor), this motor should work fine.
Reviews
Find Best Price at Amazon"This is model F0510B2944 a 3-bolt (mushroom) roof vent fan motor designed to replace motor models A0416B2059, A0510B2389 & F0510B2497 for LOMANCO 2000 or 1800 ADDAVENT power roof ventilators. If you can't get the fan blade balanced but the motor spins quietly, then probably best to buy a new fan blade too. You can easily bend the fan blades on re-installation, so might be good to test it in place BEFORE you put the thermostat back together. I did try to lube and restore the old motor as outlined above by Randal Pozzi, but the shaft collar reservoirs were disintegrating so the shaft still wobbles."
"Ultimately, I paid attention to the fan motor write up on Amazon and the description that said "if your fan motor is held in place by a belly band, this is the fan motor you need for replacement"."
"If I had to do it again, I would have bought a new fan blade."
"On the product itself, this was my first time to attempt to install an attic power fan so I made a couple of mistakes but none of them were the fault of this product, it installed easily and is running fine."
"Ventamatic motor thickness is around 2 and 1/4 inches while the Lomanco is 2 inches (thinner but still installed OK; the rotors are also different in thickness, so the the original rotor with longer shaft is not interchangeable with new motor...I gave it a try, but it will not work). The shaft diameter of both is 1/2 inch, so old fan blade fit; the clearance to the motor body is very close, but still adequate; hand bent the fan blades a little, just to be sure."
"To clear the fan blades I need a motor shaft height of at least 2.75 inches."
Brand New Window Lift Motor Motor. Fits Front Left (Driver-Side). Fits 2004-2014 Nissan Titan. Fits 2004 Nissan Pathfinder. Fits 2005-2014 Nissan Armada. Fits 2004-2011 Infiniti QX56. Replaces Nissan 80731-9FJ0A, 80731-ZT01A. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Installation was fairly easy but I recommend you take a picture of the orientation before removing the old one (I didn't and had to find a video on line)."
"The only thing is where the wires enter the motor it looks a little cheap relative to the original."
"OEM replacement!"
"Fit my 2012 Nissan Titan and was very easy to install."
"It worked wire is very short to plug-in to the factory harness have to stretch it around the back of the panel to make it work."
"No comments at this time but thanks apdty."
"Arrived on time and working as intended."
"Very satisfied with my purchase."
Dorman Window Lift Motors are designed to integrate with Dorman's Window Regulator program - offering the most complete repair solution. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"It did fit perfectly on my CX9 2009."
"The passenger rear window stopped working and this was the perfect fix."
"I replaced the motor works great, every so often it has a hiccup and when it rolls up it stops then rolls down half way had to reprogram it."
"Perfect Fit, Exact replacement of the OEM part."
"Bought one of these in addition to the windows motor."
"Fit my 2011 Mazda CX-9 drivers window perfect, and works great."
"I installed this about a month ago and it works perfectly...smooth and quiet."
"Worked perfect for my 2012 mazda cx7."
Best Automotive Replacement Power Window Regulators
Dorman's Window Regulators have been re-engineered to improve on the original design. Quality tested to ensure trouble free installation, performance, and durability.
Reviews
Find Best Price at Amazon"The included instructions for how to install are not all that great, so you are going to want to look online for instructions if you do not already know how to put it in."
"The hardest part of taking off the door panel is disconnecting the window switches. On some models the window switches will just pry out of the door, but on my model Yukon, the switches are screwed into the door panel, so you have to disconnect the wiring harnesses after you loosen the door panel."
"Once replaced it worked like a charm and has never sounded or worked better!"
"Opening the box I found the regulator, a piece of paper with information type on it describing the possible changes from the OEM part. On the bottom of the regulator where there was two bolts, there are welded studs on the new one.. Also, a support bracket mid way on the right side of the part is not present on the new one. The paper work explained the difference of the OEM and the replacement with pictures, its a copy, but readable. The paper work shows a picture and explains the missing point of contact. Most of that was taking my time and removing the door panel, plastic and wire's and reinstalling them."
"Disclaimer for this is Amazon Garage stated it fits my 2001 GMC Yukon XL, which it did but with compromises to the integrity of the regulator. Note the door frames for many GMC and Chevy trucks for several model years are the same so these issues will likely affect you too.Dorman just tried to save a few bucks by skimping out on some details. *The Original and AC Delco replacement comes with 6 bolt anchor points, 3 on each track, with the holes pre-drilled in the car door frame to accommodate them. *Tracks come pre-lubricated but I added some extra to ease operation. The product does work and it does fit with some modifications if you want to regain the fifth bolt anchor point, but life is just much easier with the AC Delco instead."
Best Automotive Replacement Manual Window Regulators
Dorman's Window Crank Handles are made of durable metal or plastic to withstand years of use. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"works good until you have a little resistance in the window regulator, then strip a palooza."
"I can crank it up and down!"
"Does the job!"
Best Automotive Replacement Window Regulator & Motor Assemblies
Dorman's Window Regulators have been re-engineered to improve on the original design. Quality tested to ensure trouble free installation, performance, and durability.
Reviews
Find Best Price at Amazon"There are videos on You Tube for the removal of the door panel, not to many on the actual window regulator, but there are some. It does use the Auto down feature, and the plug was a direct fit."
"You need a 10mm socket, a cross tip screwdriver, body panel tools and a heat gun or blow dryer. I can't emphasize the body panel tools enough. Without the body panel tools you will probably have a tough time of it and scratch your truck."
"I don't normally do this type of work on my car, but after reading some reviews on YouTube and other sites it didn't sound too hard. My motor wasn't completely dead yet but on its way out so that may have made it a bit easier to line up the bolts as needed in the door frame."
"I am not mechanically inclined, but with a little help from a video on youtube, I was able to install it without too much trouble and saved a bundle!"
"Most difficult part is getting the new regulator into position behind the door panel, but just take it slow and work it in position."
"Excellent replacement for the factory Nissan assembly."
"After a little research I ordered the "Dorman 741-348 Nissan Front Driver Side Window Regulator with Motor"."