Best Anchors
Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Once removed all that is left behind are tiny pinholes that can be easily covered up. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Wont damage walls, installs with tiny picture hanging nails. Easy tilt for access to cables. Only tools required are a hammer and a screwdriver. Installs using tiny picture hanging nails.
Reviews
Find Best Price at Amazon"I thought this was to good to be true to actually work and I thought I'd wake up to my tv on the floor but this item seems to be very strong....really good idea for someone who doesn't want to go through the hassle of finding studs and all that."
"I didn't use all the nails...there's a lot of them."
"I ordered this to try to hang and older plasma 1080p tv."
"I climbed up on my ladder to look down on my TV to make sure I had it in the right place."
"This weighs about a pound, mounts on any sheet rock wall in less than 10 minutes with no drilling nor anchors required, and is solid."
"Put my slim 55" up and it has stayed easily."
"Easy to install arrived early just didn't know how to use amazon at the time,to leave feed back so that's the reason for my delay."
"I live in an apartment so knowing that it leaves small little pinhead sized holes in the walls were a plus and it requires hardly any tools."
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening. Media. Drill Diameter. Bolt Description. Ultimate Tensile Strength Values. Ultimate Shear Strength Values. 1/2" Drywall. 1/2". 3/16"-24 UNC zinc-plated steel. 238 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
Reviews
Find Best Price at Amazon"I bought them to hand my projector screen to the ceiling....."
"Bear in mind though that you do have to screw whatever tightly up to the wall - I have some shelves that kind of hook on to a screw protruding 1/4 inch from the wall - alas these wouldn't work in this situation."
"Easy to use and works well for its intended purpose."
"If you want to hang a TV or a clothing hanger rack, than these are the way to go."
"I purchased these to replace poorly designed fasteners that came with a towel bar I'd purchased."
"These really work well."
"Very easy and straightforward instructions to follow."
"These things are great - much better than a normal toggle bolt!!"
Feel Free To check out our Other Items, You Might find Something That Suit Your Needs, Just copy paste the link in your browser and it will take you to the item. Anchor Assortment Kit, Anchors, Molly Bolts, Screws, and Toggle Bolts. Best Quality Drywall Anchors, Pre-drills precise hole in gypsum wall board - No hole preparation required.
Reviews
Find Best Price at Amazon"I needed to hang some ikea shelves on a wall that had practically zero studs where I needed them to be and was having a really difficult time keeping the shelves up, even with little to no weight on them."
"These suckers are tough, I am a very critical person but I couldn't be happier, I ordered a curve curtain rod and it came with some terrible metal anchors and it would barely hold the curtain rod up, so after removing those and using these to mouth the curtain rod I bet I could do pull ups on it!"
"No problem just careful as the y make big holes."
"Hint, even though they say self drilling, you are way better off to drill a 1/4 hole or at least drive a nail where you want to place them."
"Also, make sure you're not accidentally screwing it into a place where there's a stud -it will dig up your wall pretty bad (personal experience)."
"Items arrived super fast & i immediately started using them, putting up some ikea flloating shelve."
"For the most part they work as intended, couple of the anchors broke on me last night when originally drilling them in."
"As noted in many of the other one star reviews, the plastic is stripped by the phillips screw driver bit when attempting to fasten into drywall."
Best Chemical Anchors
The actual item may not be an exact match with the image shown, but should be similar.
Find Best Price at AmazonBest Drive Anchors
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. One Piece, tamper-proof anchor for use in concrete, block, brick or stone.
Reviews
Find Best Price at Amazon"Easy to install and hold perfectly."
"These were easy to install and work great."
"Amazing for hanging drywall on concrete."
"great new products, beats using a screw but the drilled hole must be perfect no chipping out of the concrete."
"Worked for application used."
"After working with tapcon screws, these are much better."
"work fantastic...just don't use where you might need to remove once installed!"
Best Drop-In Anchors
Aluminum Tamp Tool For Installing Brass Anchors.
Reviews
Find Best Price at Amazon"Nothing fancy."
"now i don't have to use my hammer and pound the loop-loc brass retainer's in."
"Made installing 30 pool cover anchors a mcx easier job."
"Worked as expected, no issues."
"Quick shipment and a superior quality product."
"This works just right to set the loop loc anchor in place."
"Metal is soft so be gentle when hammering."
Best Drywall Anchors
Starts easier than other drywall anchors, drills directly into drywall even if you hit a wood stud.
Reviews
Find Best Price at Amazon"My house is older and I have plaster walls on the main floor and drywall in the remodeled basement."
"I bought these based on the reviews posted here."
"Don't bother with the plastic anchors and don't bother going to your local hardware store."
"They sell the cheap one's made in China now. Plus made in USA, good quality and works like they are suppose to."
"Best anchors I’ve ever used."
"The absolutely best drywall anchor I have ever used."
"And stuff kept wiggling out over time - it was frustrated and I felt like I was going to have to cut out drywall and do a patch."
"Works well for hanging up my 50" tv and my guitar hangers."
Best Expansion Shield Anchors
The Wej-It MS14 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands around the anchor's cone base when the included setting tool is inserted, holding the anchor in place within the mounting material.
Reviews
Find Best Price at Amazon"I have 1 1/2" screws and 5/8" plywood so I drilled the 1/2" diameter hole to 1" deep."
"Looks just like the picture....I love it!"
"Neither box contained the setting tool that should be in the box according to the product description."
Best Hollow-Wall Anchors
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application.
Reviews
Find Best Price at Amazon"It's probably not just the fault of this company making these anchors, as the bolt manufacturers seem to be much lower quality in their threading than past years, but when you combine the two issues, then the user of these things feels the pain. If you can't get these to lay flat in the wall before you snap off the plastic extensions, you will have issues threading the bolt into the hole. It's easy to know when it is flat inside the hole because the two white plastic pieces will be even on the end, but you could still have something flexible in the wall that will angle the metal part once you start tightening the bolts."
"Togglers have extremely useful and easy to install. The Bulk box of 100 does not include the necessary Screws/ bolts. Did not know this till I was on site and started looking for the bolt bag and thats when I found out they were not included. so Had to make a Trip to the Hardware store. Togglers are Great. If they would make two more larger sizes that would be awesome. Love em."
"The only snap toggle to use in the field."
"We send these to customers for product mounting and I usually send an extra just in case and very rarely do I get any questions on their installation or difficulties."
"Then just place the correct screw from myour local hardware into the treads, instant wall haning ability."
"One of the best inventions for the workforce, I use these for all kinds of things, and they stay in the wall, so if you need to remove the bolt, the toggle stays in place!"
"Since my wall depths vary, I bought the lengths needed for each situation."
"I hang TV's for a living and these are a life saver."
Best Hook Anchors
The Master Anchor with Hook Plate utilizes a # 8 stainless steel screw which is an ideal size for most bathroom accessory items and window dressing brackets. Install using the Apache200 Drill Bit (RC-WA200GTS34) to drill through the material easily with your cordless drill.
Reviews
Find Best Price at Amazon"However, in order to do so, I will have to unscrew the WingIts from the original mount, thus losing the anchors inside the wall when I unscrew it to install the new mount."
"I recently had the plastic wall anchor fall through the hole so I had a huge hole in the wall."
"We had two very heaving mirrors (about 50 lbs each) left to install in our masterbath, over a wall that we covered with decorate tile made of glass and stone materials."
"Worked very well."
"I questioned if these would hold the 40lb head but they worked great."
"Easy to install and certainly supports the weight."
"Why would you get a product without the screws to hang it up??"
Best Sleeve Anchors
The anchor diameter equals hole diameter, with 1/4 - 3/4 inch diameter anchors available, up to 6-1/4 inch length. Specs: Anchor Diameter and Drill Bit Size - 1/2-Inch inch; Effective Anchor Length - 4 inch; Bolt Diameter - 3/8 inch; Threads per Inch - 16; Min. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I needed several anchors to hang all sorts of things into the cinder block walls in my basement. I looked at a local hardware store and it was going to cost an arm and a leg, so as with everything it seems, I went on Amazon to hunt for a better deal. This could also be done with a hack saw, but the sound of air tools and the sight of all the sparks will give you serious street cred with your neighbors."
"As Advertised, reliable brand."
"Used it for building a 40 foot plus boardwalk along a concrete foundation."
"Arrived promptly - only 1 out of 25 bolts defective."
"worked quit well, used them to secure my shop to the concrete."
"great product nice and strong."
Best Stud Anchors
Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Once removed all that is left behind are tiny pinholes that can be easily covered up. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Wont damage walls, installs with tiny picture hanging nails. Easy tilt for access to cables. Only tools required are a hammer and a screwdriver. Installs using tiny picture hanging nails.
Reviews
Find Best Price at Amazon"I thought this was to good to be true to actually work and I thought I'd wake up to my tv on the floor but this item seems to be very strong....really good idea for someone who doesn't want to go through the hassle of finding studs and all that."
"I didn't use all the nails...there's a lot of them."
"I climbed up on my ladder to look down on my TV to make sure I had it in the right place."
"This weighs about a pound, mounts on any sheet rock wall in less than 10 minutes with no drilling nor anchors required, and is solid."
"Put my slim 55" up and it has stayed easily."
"Easy to install arrived early just didn't know how to use amazon at the time,to leave feed back so that's the reason for my delay."
"I live in an apartment so knowing that it leaves small little pinhead sized holes in the walls were a plus and it requires hardly any tools."
"Any TV mount is scary and this is even scarier."
Best T-Anchors
Recommended for quick, easy fastening of fixtures in a variety of light duty applications. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"can't find wall anchors without "matching" screws in the hardware stores."
"These did wonders for holding up my shelves at my house."
"These things just work."
"I love these anchors."
Best Toggle Anchors
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening. Media. Drill Diameter. Bolt Description. Ultimate Tensile Strength Values. Ultimate Shear Strength Values. 1/2" Drywall. 1/2". 3/16"-24 UNC zinc-plated steel. 238 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
Reviews
Find Best Price at Amazon"I needed to hang a wall mount for a monitor and there was no stud where I needed one, so I tried these wall anchors and they were perfect for the job."
"I bought them to hand my projector screen to the ceiling....."
"Bear in mind though that you do have to screw whatever tightly up to the wall - I have some shelves that kind of hook on to a screw protruding 1/4 inch from the wall - alas these wouldn't work in this situation."
"The only real negative with these is that they don't get pulled seamlessly to the surface you're attaching to, but that is SUCH a small issue!"
"Easy to use and works well for its intended purpose."
"If you want to hang a TV or a clothing hanger rack, than these are the way to go."
"I purchased these to replace poorly designed fasteners that came with a towel bar I'd purchased."
"Very easy and straightforward instructions to follow."
Best Wedge Anchors
The Strong-Bolt is wedge anchor designed for optimum performance in both cracked and uncracked concrete: a requirement that the 2009 IBC places on post-installed anchors. Independently adjustable tri-segment clip for follow-up expansion.
Reviews
Find Best Price at Amazon"What I can tell you is drilling 25 4" deep holes in poured concrete with a hammer drill is really no fun!"
"Great quality and worked perfect for what we needed."
"Simple and effective to anchor to concrete."
"Anchor works better than one I got from home depot which will not hold."
"Just what I needed to securely fasten a post holder to concrete, the hardest part was drilling the holes which took some time and effort."