Koncocoo

Best Toggle Anchors

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening. Media. Drill Diameter. Bolt Description. Ultimate Tensile Strength Values. Ultimate Shear Strength Values. 1/2" Drywall. 1/2". 3/16"-24 UNC zinc-plated steel. 238 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
Reviews
"I needed to hang a wall mount for a monitor and there was no stud where I needed one, so I tried these wall anchors and they were perfect for the job."
"I bought them to hand my projector screen to the ceiling....."
"Bear in mind though that you do have to screw whatever tightly up to the wall - I have some shelves that kind of hook on to a screw protruding 1/4 inch from the wall - alas these wouldn't work in this situation."
"The only real negative with these is that they don't get pulled seamlessly to the surface you're attaching to, but that is SUCH a small issue!"
"Easy to use and works well for its intended purpose."
"If you want to hang a TV or a clothing hanger rack, than these are the way to go."
"I purchased these to replace poorly designed fasteners that came with a towel bar I'd purchased."
"Very easy and straightforward instructions to follow."
Find Best Price at Amazon
TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 5)
The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
Reviews
"And i like to make a shout-out to reviewers of the pantry shelves for mentioning these Toggler anchors - i didnt know there was such a thing - thanks!"
"If it's tough to push the red key in, make sure you've got the anchors ALL the way into the hole and try again."
"I used these to anchor speaker mounts to the wall for my 5.1 system."
"these actually work pretty well for mounting things on hollow doors."
"I recommend this for anyone struggling to keep bathroom hooks or pantry hangers in place."
"Love these wall anchors but you can find them locally at almost any hardware store - regardless, they have proven to be a good quality product for the "hollow door" issues when hanging something on a door."
"In a house full of steel studs and drywall these are great."
"Piece of cake...easy to use...rock solid performance."
Find Best Price at Amazon
TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 1/2"-13 UNC Fastener Size (Pack of 25)
The anchor requires a 1/2"-13 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Reviews
"Works great, sometimes it's hard to anchor into hollow concrete block, these work everytime and hold strong without the fear of them stripping out the block (like a Tapcon would)."
"good value vs hardware store or home center."
"If you have an application where your concrete is hollow (16"x8"x8" Cinder block - I used large ones to mount 2x10 framing lumber), this is useful as long as you mount in the hollow sections of the block and stay away from the mortar joints or the webs."
"These toggles went in super easy and it seems to be held very well, feels almost as sturdy as bolting into a stud."
"Just be careful that this doesn't include the 1/2 bolt for the wall."
"Only thing I could find that would hold in thin wall hollow block."
"Used these in a sheet rock wall with a thin metal stud."
Find Best Price at Amazon

Best Toggle Anchors

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening. Media. Drill Diameter. Bolt Description. Ultimate Tensile Strength Values. Ultimate Shear Strength Values. 1/2" Drywall. 1/2". 3/16"-24 UNC zinc-plated steel. 238 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
Reviews
"I bought them to hand my projector screen to the ceiling....."
"Bear in mind though that you do have to screw whatever tightly up to the wall - I have some shelves that kind of hook on to a screw protruding 1/4 inch from the wall - alas these wouldn't work in this situation."
"Easy to use and works well for its intended purpose."
"If you want to hang a TV or a clothing hanger rack, than these are the way to go."
"I purchased these to replace poorly designed fasteners that came with a towel bar I'd purchased."
"These really work well."
"Very easy and straightforward instructions to follow."
"These things are great - much better than a normal toggle bolt!!"
Find Best Price at Amazon

Best Wedge Anchors

Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete, 25-Pack
The Strong-Bolt is wedge anchor designed for optimum performance in both cracked and uncracked concrete: a requirement that the 2009 IBC places on post-installed anchors. Independently adjustable tri-segment clip for follow-up expansion.
Reviews
"What I can tell you is drilling 25 4" deep holes in poured concrete with a hammer drill is really no fun!"
"Great quality and worked perfect for what we needed."
"Simple and effective to anchor to concrete."
"Anchor works better than one I got from home depot which will not hold."
"Just what I needed to securely fasten a post holder to concrete, the hardest part was drilling the holes which took some time and effort."
Find Best Price at Amazon

Best Sleeve Anchors

Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)
The anchor diameter equals hole diameter, with 1/4 - 3/4 inch diameter anchors available, up to 6-1/4 inch length. Specs: Anchor Diameter and Drill Bit Size - 1/2-Inch inch; Effective Anchor Length - 4 inch; Bolt Diameter - 3/8 inch; Threads per Inch - 16; Min. Enter your model number to make sure this fits.
Reviews
"I needed several anchors to hang all sorts of things into the cinder block walls in my basement. I looked at a local hardware store and it was going to cost an arm and a leg, so as with everything it seems, I went on Amazon to hunt for a better deal. This could also be done with a hack saw, but the sound of air tools and the sight of all the sparks will give you serious street cred with your neighbors."
"As Advertised, reliable brand."
"Used it for building a 40 foot plus boardwalk along a concrete foundation."
"Arrived promptly - only 1 out of 25 bolts defective."
"worked quit well, used them to secure my shop to the concrete."
"great product nice and strong."
Find Best Price at Amazon

Best Drive Anchors

Powers Fastening Innovations 05512 Spike Anchor - 3/16-Inch by 4-Inch Mushroom Head Grade 8.2 Carbon Steel Pre-Expanded Anchor, 100 Per Box
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. One Piece, tamper-proof anchor for use in concrete, block, brick or stone.
Reviews
"Easy to install and hold perfectly."
"These were easy to install and work great."
"Amazing for hanging drywall on concrete."
"great new products, beats using a screw but the drilled hole must be perfect no chipping out of the concrete."
"Worked for application used."
"After working with tapcon screws, these are much better."
"work fantastic...just don't use where you might need to remove once installed!"
Find Best Price at Amazon

Best T-Anchors

Hillman Hollow Wall Anchor 12 - 14 - 16 Box/50
Recommended for quick, easy fastening of fixtures in a variety of light duty applications. Enter your model number to make sure this fits.
Reviews
"can't find wall anchors without "matching" screws in the hardware stores."
"These did wonders for holding up my shelves at my house."
"These things just work."
"I love these anchors."
Find Best Price at Amazon

Best Hook Anchors

WingIts RC-MAWHP35-6 Master Anchor with Stainless Steel Hook Plate, 6-Pack
The Master Anchor with Hook Plate utilizes a # 8 stainless steel screw which is an ideal size for most bathroom accessory items and window dressing brackets. Install using the Apache200 Drill Bit (RC-WA200GTS34) to drill through the material easily with your cordless drill.
Reviews
"However, in order to do so, I will have to unscrew the WingIts from the original mount, thus losing the anchors inside the wall when I unscrew it to install the new mount."
"I recently had the plastic wall anchor fall through the hole so I had a huge hole in the wall."
"We had two very heaving mirrors (about 50 lbs each) left to install in our masterbath, over a wall that we covered with decorate tile made of glass and stone materials."
"Worked very well."
"I questioned if these would hold the 40lb head but they worked great."
"Easy to install and certainly supports the weight."
"Why would you get a product without the screws to hang it up??"
Find Best Price at Amazon

Best Stud Anchors

Hangman Products S-2040A No Stud TV Hanger Mount TVs up to 55-Inch
Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Once removed all that is left behind are tiny pinholes that can be easily covered up. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. Wont damage walls, installs with tiny picture hanging nails. Easy tilt for access to cables. Only tools required are a hammer and a screwdriver. Installs using tiny picture hanging nails.
Reviews
"I thought this was to good to be true to actually work and I thought I'd wake up to my tv on the floor but this item seems to be very strong....really good idea for someone who doesn't want to go through the hassle of finding studs and all that."
"I didn't use all the nails...there's a lot of them."
"I climbed up on my ladder to look down on my TV to make sure I had it in the right place."
"This weighs about a pound, mounts on any sheet rock wall in less than 10 minutes with no drilling nor anchors required, and is solid."
"Put my slim 55" up and it has stayed easily."
"Easy to install arrived early just didn't know how to use amazon at the time,to leave feed back so that's the reason for my delay."
"I live in an apartment so knowing that it leaves small little pinhead sized holes in the walls were a plus and it requires hardly any tools."
"Any TV mount is scary and this is even scarier."
Find Best Price at Amazon

Best Drywall Anchors

#1 Best Quality Zinc Self Drilling Drywall Anchors with Screws Kit, 100 Pieces All Together
Starts easier than other drywall anchors, drills directly into drywall even if you hit a wood stud.
Reviews
"My house is older and I have plaster walls on the main floor and drywall in the remodeled basement."
"I bought these based on the reviews posted here."
"Don't bother with the plastic anchors and don't bother going to your local hardware store."
"They sell the cheap one's made in China now. Plus made in USA, good quality and works like they are suppose to."
"Best anchors I’ve ever used."
"The absolutely best drywall anchor I have ever used."
"And stuff kept wiggling out over time - it was frustrated and I felt like I was going to have to cut out drywall and do a patch."
"Works well for hanging up my 50" tv and my guitar hangers."
Find Best Price at Amazon

Best Drop-In Anchors

Loop Loc Aluminum Tamp Tool For Installing Brass Anchors
Aluminum Tamp Tool For Installing Brass Anchors.
Reviews
"Nothing fancy."
"now i don't have to use my hammer and pound the loop-loc brass retainer's in."
"Made installing 30 pool cover anchors a mcx easier job."
"Worked as expected, no issues."
"Quick shipment and a superior quality product."
"This works just right to set the loop loc anchor in place."
"Metal is soft so be gentle when hammering."
Find Best Price at Amazon

Best Chemical Anchors

(50 Count) Simpson Strong-Tie LTA2 Lateral Truss Anchor
The actual item may not be an exact match with the image shown, but should be similar.
Find Best Price at Amazon

Best Hollow-Wall Anchors

TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application.
Reviews
"It's probably not just the fault of this company making these anchors, as the bolt manufacturers seem to be much lower quality in their threading than past years, but when you combine the two issues, then the user of these things feels the pain. If you can't get these to lay flat in the wall before you snap off the plastic extensions, you will have issues threading the bolt into the hole. It's easy to know when it is flat inside the hole because the two white plastic pieces will be even on the end, but you could still have something flexible in the wall that will angle the metal part once you start tightening the bolts."
"Togglers have extremely useful and easy to install. The Bulk box of 100 does not include the necessary Screws/ bolts. Did not know this till I was on site and started looking for the bolt bag and thats when I found out they were not included. so Had to make a Trip to the Hardware store. Togglers are Great. If they would make two more larger sizes that would be awesome. Love em."
"The only snap toggle to use in the field."
"We send these to customers for product mounting and I usually send an extra just in case and very rarely do I get any questions on their installation or difficulties."
"Then just place the correct screw from myour local hardware into the treads, instant wall haning ability."
"One of the best inventions for the workforce, I use these for all kinds of things, and they stay in the wall, so if you need to remove the bolt, the toggle stays in place!"
"Since my wall depths vary, I bought the lengths needed for each situation."
"I hang TV's for a living and these are a life saver."
Find Best Price at Amazon

Best Expansion Shield Anchors

Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8" Length, 1/4"-20 Threads (Pack Of 100)
The Wej-It MS14 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands around the anchor's cone base when the included setting tool is inserted, holding the anchor in place within the mounting material.
Reviews
"I have 1 1/2" screws and 5/8" plywood so I drilled the 1/2" diameter hole to 1" deep."
"Looks just like the picture....I love it!"
"Neither box contained the setting tool that should be in the box according to the product description."
Find Best Price at Amazon