Best Industrial Hardware
For closets, lockers, offices, kitchens, laundry rooms, mud rooms, kids' rooms, dorm rooms, baths, boats and Campers. Separate backing strip adheres firmly to flat surfaces, yet removes cleanly.
Reviews
Find Best Price at Amazon"I used two of these and one smaller hook to create an iPad holder for right across my toilet."
"This product is doing what I expected it to do."
"It currently also holds my ipad pro inside a backpack, with some other small objects (wallet, keys, etc) so you can definitely put some weight on this guy."
"If you pull towards you, it will peel paint off wall, which I accidentally did in a closet until I reread the instructions."
"I have purchased dozens of these and use these all over my house for everything from keys, robes, hats, and in my Nerd Cave for a few small props."
"We use them for towels and cooking utensils."
"Can never go wrong with command strips and hooks!"
"I'll update if they damage the surface on removal. Be careful about cleaning the painted surface with alcohol per the instructions."
Rearrange as often as you like with Command Refill Strips Affordable way to decorate and organize your home, school and office Available in a wide variety of sizes and styles Allows for quick and easy decorating Provide handy and stylish organization Holds strongly, removes cleanly Works on a variety of surfaces Easy to apply, easy to remove. Works on a variety of surfaces; each hook holds up to 1/2 lb.
Reviews
Find Best Price at Amazon"Online I saw a few cool ways to store measuring spoons, and I wanted to duplicate it without putting holes into my cabinetry. They have been holding all my measuring spoons and cups for >1.5 months without an issue."
"I also didn't take the painting off and secured the velcro to the wall I wasn't sure how to remove the picture it's so secure I thought the tabs would come off. Though we did try to hang a much heavier painting I again couldn't figure out how to remove the painting then secure the velcro then put the painting back maybe you should try that and prep the wall with alcohol at like 6 AM CRASH."
"Removing them is very easy too, just pull the tab firmly while holding the hook."
"I noticed that every time I grabbed the bar of soap, it made everything fall so I knew I needed something to help keep it in place. I am thinking about buying the towel hooks next and if they are as good as these, I won't have any problems whatsoever!"
"I find goo-gone effective in removing adhesive from painted walls."
"Great for concrete or plaster walls where nails don't work."
"These the adhesive on these hooks are strong and stuck to my ceiling well, and have been holding up the net ever since."
"I use it for commonly used large kitchen utensils and as a key hanger."
Size Name: 40 Clips |. Color Name: Clear. Clear clips, clear strips.
Reviews
Find Best Price at Amazon"Some of them had been on the walls for a couple of years and still I removed them with ease."
"These clips are awesome for hanging lightweight wires or keeping light-duty extension cords or lamp coors tucked against a wall or doorframe."
"Smaller than expected, I don't know if I didn't enough but certainly wasn't expecting such tiny little hooks."
"Worked great for hanging spiderwebs from my ceilings inside for Halloween decorations."
"I was attempting to try to hang a tapestry but obviously these are way to small but the problem was the adhesive that sticks to the wall."
"Excellent value as well ese are great clips and very expensive to by at local store in small quanities."
"The sticky side does not stick to the walls in her room."
"I have one hook on the wall every couple feet to hold up a small string of lights and they still fall off."
Best Biscuits & Plugs
System includes plug cutting drill guide block, standard-size custom plug cutting bit, stop collar and hex wrench. Create custom pocket-hole plugs using a unique plug cutter and matching drill guide block.
Reviews
Find Best Price at Amazon"I am still experimenting with the product."
"Tried a few times."
"I love all my Kreg tools this will pay for it self."
"We have the Kreg Pocket Hole cutter and wanted to be able to make our own plugs."
"The Kreg Jig application worked absolutely fantastic it met all my expectations and passed them and the price was great."
"Great product."
"been looking for something like this so I can cut plugs from the same kind of wood I am working with so everything matches better than store purchased plugs."
"Drills well and easy to change."
Best Hardware Braces
Depending on the accessories that you get for it you can use the same pole that held crown molding in place for you one day as a load jack in your pickup truck the next. Reaches 5-to 12-feet; Action lever for secure pressure.
Reviews
Find Best Price at Amazon"I would place the center of the strut where it needed to be and hold it in place with one hand and then grab the 3rd Hand with the other and place it under the strut and then squeeze the lever to clamp it against the strut to hold it in place against the ceiling."
"Put them to use right out of the box...then at the close of the day, went back to Amazon and hit the "Buy Again" button and got two more. Couldn't be happier about finding this elegant solution to a wide range of work lifting and bracing challenges."
"Great poles."
"I thought it was a little hard to figure out how to use these at first (I couldn't find any instructions), but essentially you use the buttons on the sides as large adjustments and the handle as a very small adjustment - it's hard to see the effect of the handle at first because the movement is so small."
"I was looking for a solution for how to mount the HTC Vive's lighthouse base stations, I used these in conjunction with Smallrig's Clamp Mount V1 w/ Ball Head Mount Hot Shoe Adapter and Cool Clamp, and it has made an excellent mounting solution!"
"I may buy two more, they're great for sealing off part of a work area by running plastic sheeting from bottom to top and sealing it well from dust and debris."
"If you clamp them too hard against the ceiling, the rubberized foot can stick to the paint and rip the paint off with it."
"Right now I have to tap the ratchet mechanism with a hammer each time it sticks to get it to release."
Best Hardware Brackets
White powder coated steel twin mounting bracket for 5000 Series, 10000 Series, and YTB 10" & YTB 20" Filter Housings. Filter Housing Mounting Bracket for Big Blue 10" and 20" Filter Housings.
Reviews
Find Best Price at Amazon"Components: -Pentek Big Blue 20" Filter Housings. -Housing Bracket for Big blue 10" and 20" filter. Filters IN ORDER: 1-Pentek DGD-2501-20 Spun Polypropylene Filter 20 micron dual stage to 1 micron. 2-Pentek 155263, RFFE20-BB Radial Flow Iron Removing Filter. 3-Pentek RFCC-BB Carbon Filter. you can add another Filter after the Carbon for media if you want."
"This is a must-have item if you install the 20" Big Blue water filter sumps."
"Just what I needed in order to complete my whole house filter set up."
"Gave 4 stars as there was no info for what hardware to use when attaching to the filter (I had to look it up)."
"This mount would have worked well but my mounting situation wouldn't work with it and it was more than half the price of the bracket to send it back."
"I bought these for my new Big Blue huge filter housings."
"Who sells a bracket without even the screws to attach it to the filter itself (fine no mounting screws, that I can live with, but no screws to attach it to the filter itself?!)."
"The four holes do match the filter housing top but the big holes are not in alignment."
Best Hardware Bumpers
MADE IN THE USA WITH SUPERIOR ADHESIVE PERFORMACE!
Reviews
Find Best Price at Amazon"After enduring months of cabinet slamming, I finally decided to talk to my neighbors to resolve the problem only to find out they had no door bumpers - or at best - the really flat ones."
"This slows the impact and spreads the impact, quieting the sound more effectively than the simple dome bumpers they replaced."
"When removing the bumper from the backing sheet, this thin, clear, taffy-like adhesive goo would rather stay on the backing sheet, thus often pulls away from the bumper where it belongs."
"Very unique design."
"These bumpers work quite well and were exactly what I expected."
"(water heater). The good news is that I bought them for my chopping board to begin with. There's a little bit of a bounce if I thud the board hard enough, and it doesn't slide unless there's a puddle underneath."
"I scraped felt bumpers off before I painted and they were so disgusting, they pick up dirt and grease as the years go on so I knew I didn't want that kind again. I have used the hard rounded plastic bumpers on a few of my rental property kitchen cabinets, but they are still somewhat loud."
"These are much quieter, though to be fair I do not have solid wood cabinets (they're separate parts), so they will never be "quiet" when they close."
Best Hardware Catches
Use to latch cabinet Doors, hold small metal objects or position and hold dozens of other industrial applications.
Reviews
Find Best Price at Amazon"Works great for my magnetic building system for rc airplanes."
"They work great, I use them to build model airplanes."
"Several magnets arrived broken and chipped."
Best Hardware Chains
SECURE YOUR STUFF WITH OUR KEYED-ALIKE 2 PACK PATENTED HEAVY DUTY HITCH LOCK. This is the patented Heavy Duty Receiver Lock with an easy Auto Lock and Release Mechanism, which allows you to take the key out after unlocking and auto locks into your hitch receiver. Auto-Release and Lock - Turn the key 1/4 of the way and the lock automatically releases from the pin. We continually develop and apply the newest advancements in technology to provide customers with quality products without the inflated price tags. ✓ CONSTRUCTED FROM HEAVY DUTY SOLID STEEL FOR SUPERIOR STRENGTH: Durable Black Nickel Finish- For replacement keys or rubber cap please visit our website or contact us on Amazon.
Reviews
Find Best Price at Amazon"For $1.28, I bought some garden hose washers from Home Depot and put them on both sides of the lock."
"It is a little long, but all I did was as some tape to one end of it and it fits nice and snug now and does not rattle one bit."
"I bought a set from a retail store but discovered the pin was not long enough to work with a class IV hitch."
"I know a lot of reviews have taken away points for this lock being too long. I went to Lowes, picked up a pack of #12 O Rings with 5/8 inch inner diameter, and slid about 5 of them on the lock and put it on."
"Overall this product is the most solid hitch reciever lock I have ever used or seen. I will keep the extra one for a spare for the main hitch reciever lock."
"Bought it to use on an extender for a Thule 2 bike tray rack on the back of my Jeep Wrangler (Tire is in the way and can't open back door) Thule uses a threaded bolt and it makes it very stiff and wobble free so I was worried this lock would wobble."
"I purchased this lock for a cargo hauler that I put on the back of my 4-Runner for the family vacation."
"There is some spacing on each side, causing it to slide a bit, but not a deal breaker."
Best Drawer Slides
Easily turn existing drawers into hanging file drawers with Custom Accents PVC Hanging file rail for 1/2" drawer sides 2 feet long Black. Easily turn existing drawers into hanging file drawers.
Reviews
Find Best Price at Amazon"Just ok. Would have returned, but had to cut down for my drawers."
"I was a little concerned because I knew I was going to have to cut it down to fit my drawer but it was sturdy enough to handle the cut down process!"
"Great product, price was a little high."
"Could have used some instruction for snug fits which was exactly a 1/2 inch drawer."
"I built myself a 3-drawer file cabinet and didn't want the wire frame or metal hardware that holds the file folders so I searched for some other kind of product and this fit the bill."
"Recommend vendor for home office needs."
"I like these rails, I just wish that it was a little bit longer as I bought these to split in half to cover both sides."
Best Flexible Support Arms
Applicable torque range: Per piece: 20 ~ 70 kg-cm (19 ~ 60 lbs-inch) Per pair: 40 ~ 140 kg-cm (38 ~ 120 lbs-inch) (torque rating = lid height x lid weight x 1/2).
Reviews
Find Best Price at Amazon"Easy to install."
"I built a cabinet, and the lid rests horizontally, and lifts vertically, and it still slows the descent."
"Works as advertised."
"Very good hinge for those over head cabinets that won't stay up."
Best Grommets
General Tools utility grommet kits provide an economic solution for repairing canvas, tarps, tents, awnings and pool covers. Each easy-to-use set includes a hardened steel hole cutter, a matched mandrel/anvil pair, a hardwood backer block and an assortment of grommets. REFILLS AVAILABLE- No need to buy another kit, 1/2-Inch grommet refills available with General Tools Grommet Refill, Model# 1261-4.
Reviews
Find Best Price at Amazon"Used these to save the insert for my hamper laundry bag when I had to replace the old one."
"I was looking for a easy, fast and cheap way to put a grommet is some canvas and I came cross this set."
"Does it's job very well, recommend you make holes while working on a solid ground not a carpet."
"Just what I needed!"
"Installing these grommets on polyester shade material, the grommets cut through, but "installed" reinforced packaging tape on both sides, with the tool cutting a perfect hole."
"Exactly as advertised."
"I used this to put grommets in my 10' movie screen."
"This was my second set I bought and it works great too."
Best Handles & Pulls
Equipped with a slip resistant handle, foam padding, horizontal stabilizer bars and floor standing legs, this unit provides the ultimate support and stability for its users. This may not work on some low beds - check to ensure height from floor to bottom of mattress to be at least 17.5"). MODERN DESIGN UNIVERSAL BED RAIL - Adjustable bed rail height and width allow unit to be fit onto any sized beds (twin, full, double, queen, king).
Reviews
Find Best Price at Amazon"I'm very happy with this bed rail."
"This works great."
"This is such a great help getting out of bed."
"Works great ,does not impede getting in or out of bed acts as an assistance .Easy to put in place but secure!"
"However, the height adjustment of the legs does not accommodate a low bed."
"This is a nice accessory addition to my bed stand."
"The bed rail pouch is very well made."
"Very sturdy."
Best Hardware Hasps
For closets, lockers, offices, kitchens, laundry rooms, mud rooms, kids' rooms, dorm rooms, baths, boats and Campers. Separate backing strip adheres firmly to flat surfaces, yet removes cleanly.
Reviews
Find Best Price at Amazon"I used two of these and one smaller hook to create an iPad holder for right across my toilet."
"This product is doing what I expected it to do."
"It currently also holds my ipad pro inside a backpack, with some other small objects (wallet, keys, etc) so you can definitely put some weight on this guy."
"If you pull towards you, it will peel paint off wall, which I accidentally did in a closet until I reread the instructions."
"I have purchased dozens of these and use these all over my house for everything from keys, robes, hats, and in my Nerd Cave for a few small props."
"We use them for towels and cooking utensils."
"Can never go wrong with command strips and hooks!"
"I'll update if they damage the surface on removal. Be careful about cleaning the painted surface with alcohol per the instructions."
Best Hinges
Upgrade to durable stainless steel Whether you are wanting to take your cooler to the next level, or just looking to replace a broken classic hinge-Igloo stainless steel hinges refresh your cooler with an updated and classy look. Made of all-stainless steel both hinges and screws easy to install.
Reviews
Find Best Price at Amazon"Bought to replace the cheap plastic hinges that Igloo puts on their coolers these days, which do not last very long!"
"The original plastic hinges on igloo coolers are horrible."
"Even if the old plastic hinges hadn't broken, these would be a good idea."
"These kinds of parts allow you to fix an old cooler that otherwise works, instead of wastefully buying a new one."
"These stainless steel hinges will allow us to use our cooler for many more years."
"Get these and replace the cheap plastic ones that come standard."
"I am really not sure why these are not the hinges that are installed by the manufacturer to begin with."
"Comes in a pack of 2 when 165 quart ice chest has 3 hinges."
Best Industrial Hooks
For closets, lockers, offices, kitchens, laundry rooms, mud rooms, kids' rooms, dorm rooms, baths, boats and Campers. Separate backing strip adheres firmly to flat surfaces, yet removes cleanly.
Reviews
Find Best Price at Amazon"I used two of these and one smaller hook to create an iPad holder for right across my toilet."
"Great hooks to keep your stuff organized."
"This product is doing what I expected it to do."
"It currently also holds my ipad pro inside a backpack, with some other small objects (wallet, keys, etc) so you can definitely put some weight on this guy."
"If you pull towards you, it will peel paint off wall, which I accidentally did in a closet until I reread the instructions."
"I have purchased dozens of these and use these all over my house for everything from keys, robes, hats, and in my Nerd Cave for a few small props."
"We use them for towels and cooking utensils."
"Can never go wrong with command strips and hooks!"
Best Knobs & Hand Wheels
1.38" Star knob thru hole 1/4-20 steel zinc insert black pp.
Reviews
Find Best Price at Amazon"These things have got to be pretty good."
"Will work great in building a movable fence for my table saw."
"I bought these to use with the hold down clamps for my CNC router."
"Bought a 10-pack for $7.90 and free shipping."
"Purchase for some bolts I bought, I like the size as they are easy to screw down."
"The knobs work as expected and the price was good, but they do not look like the image advertised."
"They are well made and a great deal for the price."
"Very useful in the shop."
Best Latches
The Kit Lock 1000 locker locks are a quick retrofit for keyed cam locks supplied as standard on a wide range of lockers, cabinets and cupboards.
Reviews
Find Best Price at Amazon"I did need to buy an offset cam from another lock kit to make it work (spindle wasn't long enough)."
"It comes which many variations of the locking latch so it appears that it will fit many types of cabinets."
"I have disabled children and these locks are great for locking up cabinets draws for med, knives or what ever you don't want anyone to get into."
"Works perfectly in medical clinic exam room cupboards."
Best Lock Bolts
Color: White. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Something to pay attention to: before you tighten everything down, make sure the turning mechanism moves smoothly. After you mount the main locking mechanism inside & out, experiment with locating the "surface strike plate" so it matches well with the deadbolt, and that it's far enough away from the digital lock so there isn't slack in the door being able to open a little even when it's locked - don't want the door to be ajar enough to let outside air in when the locking mechanism is locked.And I made the hole a little bigger that the "spindle" goes through (in the middle hole) so it would turn smoothly (I didn't quite make it big enough when I first drilled it)."
"One reviewer pointed out, and I tested and confirmed it's true, that the way this style of lock works means someone can enter the digits you choose for a password in any order - which makes it much less secure."
"Be sure you have the required area to seat the base unit on the door (mine had plenty of space)."
"Durable lock for old aluminum sliding glass door."
"I have a park model travel trailer that I use as a summer home."
"Installation was fairly straightforward as long as you paid very careful attention to the instructions."
"No batteries required strictly mechanical, easy to lock does not require you to enter the code."
"Finally a touch pad for sliding doors."
Best Snaps
Nite Ize - S-Biner MicroLock ---. The Nite Ize S-Biner MicroLock is a great accessory for holding, organizing and identifiying keys or other small items. THE EASY, SECURE WAY TO HOLD YOUR KEYS - These mini "S" shaped stainless steel carabiners have two gates so you can clip your keys to one side and clip the other to your key chain so it’s easy to add and remove keys without using a split ring.
Reviews
Find Best Price at Amazon"These worked PERFECTLY to connect the swivel loop on my vintage strap to my new camera without having to resort to the nylon straps usually used on modern camera straps."
"If you own a dangler (Munroe, Tek, Gear-pull, pickpocket, etc), you should definitely own some of these Micro-Lock S Biners."
"I try not to carry a lot of crap on my keychain because it's annoying and messy but I have to have my car key, My KeyBar (key organizer, google it, it's amazing), small flash light and one whimsical item, in this case it's a keychain from a friend."
"The image I am looking at right now, the one on which I made my purchase, shows two Nite Ize S-biners of size 1; what I got in the mail was one S-biner of size 2, so you tell me how many starts I should put?"
"I also use the biner to hold my extra car key. The safety feature on my keyless entry won't let me lock the door while my car is running so I need to lock it manually in the winter to heat up my car before I leave in the morning and the s biner once again makes it a snap."
"Other reviewers complained about these being too small, but I think they are too big to be comfortable in my pocket and not secure enough to hang my keys from when hooked to a belt loop."
"(BTW - it's a very crowded keychain - three keys, car lock opener, knife, flashlight, Ti toothpick, 4 bit screwdriver, mini pliers and customer rewards fob."
"Love these little things."
Best Hardware Spacers
Come with the plastic box: M4 brass male-female standoff(5mm + 6mm) 10pcs. M4 brass male-female standoff(10mm + 6mm) 10pcs. M4 brass male-female standoff(15mm + 6mm) 10pcs. M4 brass male-female standoff(20mm + 6mm) 10pcs. M4 brass female-female standoff(6mm) 10pcs. M4 brass female-female standoff(10mm) 10pcs. M4 brass female-female standoff(15mm) 10pcs. M4 brass female-female standoff(20mm) 10pcs. M4 stainless steel screws (M4 x 8mm) 20pcs. M4 stainless steel nuts 20Pcs. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I really like the Hilitchi 360pcs M2 M3 M4 Male Female Brass Spacer Standoff Screw Nut Assortment Kit."
"great selection of heights, just whats needed for electronic prototyping."
"You get everything listed."
"Nice assortment of PCB standoffs and screws, DIY must have."
"Good quality and will get the job done."
Best Material Handling Wheels
Eliminate downtime with the Marathon Universal Fit Flat Free Wheelbarrow Tire and Wheel Assembly. It is the perfect replacement for most wheelbarrows, including popular brands like Ames True Temper, Jackson, Seymour, Truper, United General, Yard Rover and more. The Marathon brand features a full line of air filled and flat free tire and wheel assemblies for lawn and garden and commercial/industrial equipment. Features a ribbed tread that is easy to maneuver, a solid white wheel and a load capacity of 300 pounds.
Reviews
Find Best Price at Amazon"This tire is great ."
"This wheel is quite expensive but I think it is worth the price paid."
"Wheels were a little smaller than expected but work fine on my little towable cart."
"My girlfriends wheelbarrow tire was always going flat."
"Once mounted on the original rim the tire worked fine."
"The type that go flat in 60 seconds, and the type that go flat in 30 seconds."
"Fit our old dilapidated wheelbarrow perfectly."
"The wheelbarrow tire works great, no complaint."
Best Plate Casters
Simply push down on the foot pedals to elevate your workbench off the floor (3/4-Inch), move to preferred location, then lift up foot pedal to lower table firmly back onto the floor. Easily move heavy workbench to desired location.
Reviews
Find Best Price at Amazon"Since I needed three sets of casters for different power tools, I decided to buy both a Powertec and a Rockler caster set and compare them to find out which one is the best. There are three main steel sections which can be seen in the picture titled "Part Names" with the three labels “Mounting Bracket”, “Pivot Arm”, and “Tilting Plate”. Notice that the Powertec has a much more rounded surface where it contacts the tilting plate, making it easier to slide and decreasing the wear on both this part and the tilting plate. Tilting Plate. Look at the picture with the caption “Tilting Plate Comparison”. Note that the Powertec plate is slightly flared at the top of the picture whereas the Rockler plate is straight. The Rockler also tilts down 1.8 degrees, much less than the Powertec. My guess is that the Rockler’s tilting plate will be more horizontal under load than the Powertec, although this is really conjecture on my part. Mounting Bracket. One minor issue is that the Rockler mounting plate has two sides and a center section that should be bent 90 degrees from each other. Material Thickness. The pivot arm, tilting plate, and mounting bracket on the Powertec are fabricated from steel that is 1/8” thick, or .125”. Finally, when mounting casters on my really heavy table saw, I will relocate the mounting hole on the tilting plate closer to the pivot point (where the 1/4" bolt is located) to put less stress on the plate when raising and lowering."
"I built an 8' long workbench and wanted to be able to move it on occasion or at will for various reasons (working on large objects, working on the wall behind the bench, cleaning...) so at first I was just looking for regular wheels - then I found these."
"These leg levelers allowed me to adjust the table height precisely to match the table saw's height and to assure the outfeed table was in plane with the top of the saw."
"They shipped rattling around in a big box as others have mentioned, which was somewhat disconcerting, but they were not hurt."
"I can move the table full of tools with a single finger and often have to grab the table to stop it because it will roll on it's own once in motion."
"These casters have no problem lifting the bench and it moves very smoothly across the concrete floor."
"Did follow someone else's recommendation to install slightly (0.5-1 inch) - higher placement of unit resulting in lesser clearance."
"I would highly recommend them if your project needs mobility though keeping in mind as stated that each wheel is rated for one hundred pounds."
Best Plate Casters
Simply push down on the foot pedals to elevate your workbench off the floor (3/4-Inch), move to preferred location, then lift up foot pedal to lower table firmly back onto the floor. Easily move heavy workbench to desired location.
Reviews
Find Best Price at Amazon"Since I needed three sets of casters for different power tools, I decided to buy both a Powertec and a Rockler caster set and compare them to find out which one is the best. There are three main steel sections which can be seen in the picture titled "Part Names" with the three labels “Mounting Bracket”, “Pivot Arm”, and “Tilting Plate”. Notice that the Powertec has a much more rounded surface where it contacts the tilting plate, making it easier to slide and decreasing the wear on both this part and the tilting plate. Tilting Plate. Look at the picture with the caption “Tilting Plate Comparison”. Note that the Powertec plate is slightly flared at the top of the picture whereas the Rockler plate is straight. The Rockler also tilts down 1.8 degrees, much less than the Powertec. My guess is that the Rockler’s tilting plate will be more horizontal under load than the Powertec, although this is really conjecture on my part. Mounting Bracket. One minor issue is that the Rockler mounting plate has two sides and a center section that should be bent 90 degrees from each other. Material Thickness. The pivot arm, tilting plate, and mounting bracket on the Powertec are fabricated from steel that is 1/8” thick, or .125”. Finally, when mounting casters on my really heavy table saw, I will relocate the mounting hole on the tilting plate closer to the pivot point (where the 1/4" bolt is located) to put less stress on the plate when raising and lowering."
"I built an 8' long workbench and wanted to be able to move it on occasion or at will for various reasons (working on large objects, working on the wall behind the bench, cleaning...) so at first I was just looking for regular wheels - then I found these."
"These leg levelers allowed me to adjust the table height precisely to match the table saw's height and to assure the outfeed table was in plane with the top of the saw."
"They shipped rattling around in a big box as others have mentioned, which was somewhat disconcerting, but they were not hurt."
"I can move the table full of tools with a single finger and often have to grab the table to stop it because it will roll on it's own once in motion."
"These casters have no problem lifting the bench and it moves very smoothly across the concrete floor."
"Did follow someone else's recommendation to install slightly (0.5-1 inch) - higher placement of unit resulting in lesser clearance."
"I would highly recommend them if your project needs mobility though keeping in mind as stated that each wheel is rated for one hundred pounds."
Best Casters
Simply push down on the foot pedals to elevate your workbench off the floor (3/4-Inch), move to preferred location, then lift up foot pedal to lower table firmly back onto the floor. Easily move heavy workbench to desired location.
Reviews
Find Best Price at Amazon"Since I needed three sets of casters for different power tools, I decided to buy both a Powertec and a Rockler caster set and compare them to find out which one is the best. There are three main steel sections which can be seen in the picture titled "Part Names" with the three labels “Mounting Bracket”, “Pivot Arm”, and “Tilting Plate”. Notice that the Powertec has a much more rounded surface where it contacts the tilting plate, making it easier to slide and decreasing the wear on both this part and the tilting plate. Tilting Plate. Look at the picture with the caption “Tilting Plate Comparison”. Note that the Powertec plate is slightly flared at the top of the picture whereas the Rockler plate is straight. The Rockler also tilts down 1.8 degrees, much less than the Powertec. My guess is that the Rockler’s tilting plate will be more horizontal under load than the Powertec, although this is really conjecture on my part. Mounting Bracket. One minor issue is that the Rockler mounting plate has two sides and a center section that should be bent 90 degrees from each other. Material Thickness. The pivot arm, tilting plate, and mounting bracket on the Powertec are fabricated from steel that is 1/8” thick, or .125”. Finally, when mounting casters on my really heavy table saw, I will relocate the mounting hole on the tilting plate closer to the pivot point (where the 1/4" bolt is located) to put less stress on the plate when raising and lowering."
"I built an 8' long workbench and wanted to be able to move it on occasion or at will for various reasons (working on large objects, working on the wall behind the bench, cleaning...) so at first I was just looking for regular wheels - then I found these."
"These leg levelers allowed me to adjust the table height precisely to match the table saw's height and to assure the outfeed table was in plane with the top of the saw."
"They shipped rattling around in a big box as others have mentioned, which was somewhat disconcerting, but they were not hurt."
"I can move the table full of tools with a single finger and often have to grab the table to stop it because it will roll on it's own once in motion."
"These casters have no problem lifting the bench and it moves very smoothly across the concrete floor."
"Did follow someone else's recommendation to install slightly (0.5-1 inch) - higher placement of unit resulting in lesser clearance."
"I would highly recommend them if your project needs mobility though keeping in mind as stated that each wheel is rated for one hundred pounds."
Best Stem Casters
Includes sleeves.Technical Details:1-1/4" diameter swiveling hardwood caster wheels.Stem measures 1-1/2" long.Inside diameter of sleeve is 5/16".Wooden caster wheels are 5/8" thick.Zinc-plated steel sleeves.
Reviews
Find Best Price at Amazon"These were perfect for restoring an 80 year old dresser we had inherited."
"Replaced from an old chopping block that they were removed before it came to me."
"I was concerned that these casters wouldn't hae the vintage look I needed."
"Perfect for the little antique dresser I was refurbishing."
"worked perfectly on kitchen table."
"Worked out great for replacing the casters on an old table."
"exactly what my antique table needed."
Best Spacers & Standoffs
Come with the plastic box: M4 brass male-female standoff(5mm + 6mm) 10pcs. M4 brass male-female standoff(10mm + 6mm) 10pcs. M4 brass male-female standoff(15mm + 6mm) 10pcs. M4 brass male-female standoff(20mm + 6mm) 10pcs. M4 brass female-female standoff(6mm) 10pcs. M4 brass female-female standoff(10mm) 10pcs. M4 brass female-female standoff(15mm) 10pcs. M4 brass female-female standoff(20mm) 10pcs. M4 stainless steel screws (M4 x 8mm) 20pcs. M4 stainless steel nuts 20Pcs. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I really like the Hilitchi 360pcs M2 M3 M4 Male Female Brass Spacer Standoff Screw Nut Assortment Kit."
"great selection of heights, just whats needed for electronic prototyping."
"You get everything listed."
"Nice assortment of PCB standoffs and screws, DIY must have."
"Good quality and will get the job done."
Best Shims & Shim Stock Raw Materials
Precision ground and case hardened on all six sides Squareness on all sides within 0.0001" Surface finish from 6 to 16 microinches 23 through holes (5 tapped 3/8"-16 TPI and 18 plain). Precision ground Steel and Case Hardened on all six sides.
Reviews
Find Best Price at Amazon"First thing after cleaning I tested dimensions with a .0005 test indicator and it was dead on in 3D's and runs."
"Despite the flaw this is a great little tool - as close to flat and square as the price permits."
"Blocks arrived wrapped in protective paper inside a cardboard box. A small chamfer is applied along on all the edges; no sharp edges."
"1-2-3 blocks are incredibly useful for accurate tool and job set-up - for woodworkers as much as machinists and these are as accurate as any I've used over many years."
"I don't have any use for the threads, so I can't speak to the problems others have experienced with them, but mine seems well machined with no noticeable burrs or other imperfections."
"I received these 1-2-3 blocks from Amazon together with a 0-3" digital micrometer kit from iGauging, so I decided to check tolerances on the blocks I received. The advertised tolerance on this kit is +/- 0.0001", which is why I bought these particular blocks, as most blocks only advertise to 0.0002."
"I use these as a pencil holder for drawing."
"These blocks are great!"
Best Flanged Track Wheels
These Rubber Tracks from Titan are designed specifically for the Cat 247, 247B, 257 and 257B models, and will fit certain other skid steers with the 381x100.5Sx42 or the 381x101.6x42 track line. Steel Core Lugs - Continuously wound steel brace prevents snapping.
Reviews
Find Best Price at Amazon"little hard to get on at first however first time doing this work great love it ."
Best Slotted Shims
Precision Brand Slotted Shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery.
Reviews
Find Best Price at Amazon"With these shims, we set each post down and kept swapping shims until we had the posts plumb in both directions. We just loosened the nuts on the anchor bolts and rocked the column away from the shim we needed to change."
"These will be around for a lot of years!"
"good product."
Best Conveyor & Skate Wheels
Steel Frame Capacities: 5' section maximum uniformly distributed load - 175 lbs.
Find Best Price at AmazonBest Pallet & Lift Truck Wheels
Steel rimmed, 2-7/32'' (56mm) hub length. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I initially purchased an innertube to solve the problem, but found that it was impossible to install without special equipment to remove and reinstall the tire on these very small rims."
"The wheel, tube and ball bearing axle assembly are all included and they fit my 20 year old Harper hand truck like they were made for it."
"These tires, with tube and rim - great bargain..not to mention ready to mount and run!"
"Very good wheels and tire combo, made my ordinary dolly into a workhorse."
"The only problem I had was the length of the axle rod was too short so I had to make one the correct length."
"First I bought a new inner tube to fix the wheel on my hand truck."
"Semi inflated and quickly got up to correct pressure."
"Bought these for a Milwaukee brand hand truck for use at a farmers' market."