Koncocoo

Best Milling Holders

Accusize - 2" Carbide Indexable End Mills, R8 Shank, with 3 Pcs TPG 322 Inserts, #0046-0916
Reviews
"price is right and quality is good, just remember to order inserts with the mill."
"Nicely finished well-made tool."
"Seems to work well, left a nice finish on the first part I tried it on."
"Does a great job leaving a very smooth finish."
"Excellent cutter, fit R8 and runout is spot on."
"Works great, surface finish great."
"great!"
Find Best Price at Amazon
Accusize - 3/4" 90 Deg Square Shoulder Indexable End Mill with 3 ps Carbide Inserts APKT11T308, #0056-0917
Reviews
"We have a similar style cutter with only 2 inserts which wasnt holding size well so I ordered this 3 cutter replacement.."
Find Best Price at Amazon
Accusize - 3/4" 90 Deg Square Shoulder Indexable End Mill plus 13 APKT11T308 Carbide Inserts, #0056-0917+0056-1130
TiN Coated APKT11T308 Carbide.
Reviews
"use this thing a lot!!"
"It worked great , best thing is I don't have to sharpen it."
"Torx wrench was inside the tube but not wrapped to protect the inserts."
Find Best Price at Amazon

Best End Mill Holders

Accusize - 2" Carbide Indexable End Mills, R8 Shank, with 3 Pcs TPG 322 Inserts, #0046-0916
Reviews
"price is right and quality is good, just remember to order inserts with the mill."
"Nicely finished well-made tool."
"Seems to work well, left a nice finish on the first part I tried it on."
"Does a great job leaving a very smooth finish."
"Excellent cutter, fit R8 and runout is spot on."
"Works great, surface finish great."
"great!"
Find Best Price at Amazon

Best Face Mill Holders

SUNWIN 7/16 22mm R8 Shank Milling Arbor Gear Mill Cutter Holder Machine Tool Accessories
Package Including: 1 x Cutter Holder Machine. R8 shank gear cutter holder fitting for hole 22mm gear cutter.
Reviews
"Does the job."
"Good product and good service."
Find Best Price at Amazon

Best Slotting Mill Holders

Rubi TS50, TS60, TS50+, TS60+ Tool Holder 15861
Rubi TS50, TS60, TS50+, TS60+ Tool Holder - 15861.
Find Best Price at Amazon

Best Drilling Holders

HHIP 3900-5120 BXA #200 Quick Change Tool Post Set Wedge Type
Interchangeable with Loris and DORIAN same series ~ 6 piece set includes 5 Holders: No. ~ Wedge Type with Swing Capacity of 10-15" ~ All working parts hardened and ground.
Reviews
"However as expected, you will need to mill the mounting block to match your lathe."
"This quick change set is working out very well."
"Well made, functions perfectly."
"Tool post works well, some matching of sub plate to fit my lath."
"Works great."
Find Best Price at Amazon

Best Turning Holders

AccusizeTools - 9-12'' Professional Wedge Type Quick Change Tool Post 6 Pcs/Set for #100 AXA, #0251-0111
Reviews
"All of the tool holders but one had been opened from the plastic, and most of the adjustment nuts and set screws were gone. All the machining seems pretty decent, but the "wedge" mechanism isn't very smooth...have to cam over the release and come back to get the tool holder off. The cut off tool did not come with a blade, but that may have been taken when someone robbed the adjustment nuts and set screws."
"Be aware that you may need to replace the set screws if you use them frequently, they're made from butter-steel but won't cause issues if you set up once and forget."
"Release handle impedes mounting of tool holder. Excessive backlash."
"The tool post has a nice finish to it and mating surfaces look pretty good. Speaking of, I purchased this over the other similar unit on Amazon partly because "CHINA" was not printed in bold all over it. On my 10" swing lathe the holders need 0.050" removed from the bottom to allow 1/2" tools to get on-center before landing on the top of the compound."
"This appears to be the same wedge type QCTP offered by other sellers (250-1XX series) and available through several machine tool suppliers."
"Strong, well made, you cannot go wrong if you have a 9x20 or larger lathe."
"Note center post bolt is 9/16 NF threads if you're to mount it to your lathe, you'll either have to machine the base plate that's pre threaded and provided or drill tap your mounting plate to 9/16 NF."
"Out of the box, tightening lever was did not tight the wedge "all the way", in addition when in the "almost tight position", the handle was pointed to the lathe jaw and would not tighten fully."
Find Best Price at Amazon

Best Grooving Holders

HHIP 2304-1500 MTVOR 08-3B RIGHT HAND INDEXABLE THREADED HOLDER
MTVOR 08-3B Right Hand Indexable Threading & Grooving Holder ~ For OD threading and grooving. ~ Takes TNMA-32NV, TNMC-32NC, & TPMC-32NV style inserts.
Reviews
"very fast ship and high quality!"
"ad shows with insert, arrived with no insert."
Find Best Price at Amazon

Best Threading Holders


Best Coolant Hole Turning Holders

uxcell 1/4PT Thread 6mm Nozzle Flexible Water Oil Coolant Tube w Valve
Coolant Pipe used for lathe, milling, CNC machine, hydraulic machinery and water cooling system, flexible body make it easy to change the direction and angle to meet your need.
Reviews
"If it slips from your grasp, it boings-up and will squirt solvent over the edge of the washer and makes a horrible mess. When you point it at something to play cleaner on a part while you attend top other things it stays put."
"This hose holds its position fine and so far there are no leaks."
"I use this flexible tube for water when I am grinding glass for my dichroic glass jewelry business and it is just as described!"
"handy , just what i needed for air or liquid."
"Water leaks thru valve when I have it hooked to a faucet."
"Exactly what I wanted and expected."
Find Best Price at Amazon

Best Spade Blade Holders

60Pcs Quick Splice Electrical Wire Terminals and T-Tap Nylon Fully Insulated Male Spade Connectors Set by Baleauty (Only for Flexible Wire))
60Pcs Quick Splice Wire Terminal and Female Spade Connector Set. Insulated wire terrminal connector combo set. We guarantees all buyers 100% satisfaction, once you find any problem of the product please feel free to contact us, we will solve it as soon as we can.
Reviews
"Note: make sure you match your connectors to the correct wire gauge... 14, 16, 18, etc. I stripped a small sample wire first, and then viewed how each of the three crimp-on sizes interfaced with the crimp slot inside the crimp-on."
"Used to make a "chandelier" with an old ladder sand Edison bulbs."
"These work great!"
"These t taps worked great for an automotive wiring project I was doing."
"I wish I had discovered these years ago."
"This product is exactly what I needed."
"Good products!"
"Great connectors."
Find Best Price at Amazon