Best Casters
Simply push down on the foot pedals to elevate your workbench off the floor (3/4-Inch), move to preferred location, then lift up foot pedal to lower table firmly back onto the floor. Easily move heavy workbench to desired location.
Reviews
Find Best Price at Amazon"Since I needed three sets of casters for different power tools, I decided to buy both a Powertec and a Rockler caster set and compare them to find out which one is the best. There are three main steel sections which can be seen in the picture titled "Part Names" with the three labels “Mounting Bracket”, “Pivot Arm”, and “Tilting Plate”. Notice that the Powertec has a much more rounded surface where it contacts the tilting plate, making it easier to slide and decreasing the wear on both this part and the tilting plate. Tilting Plate. Look at the picture with the caption “Tilting Plate Comparison”. Note that the Powertec plate is slightly flared at the top of the picture whereas the Rockler plate is straight. The Rockler also tilts down 1.8 degrees, much less than the Powertec. My guess is that the Rockler’s tilting plate will be more horizontal under load than the Powertec, although this is really conjecture on my part. Mounting Bracket. One minor issue is that the Rockler mounting plate has two sides and a center section that should be bent 90 degrees from each other. Material Thickness. The pivot arm, tilting plate, and mounting bracket on the Powertec are fabricated from steel that is 1/8” thick, or .125”. Finally, when mounting casters on my really heavy table saw, I will relocate the mounting hole on the tilting plate closer to the pivot point (where the 1/4" bolt is located) to put less stress on the plate when raising and lowering."
"I built an 8' long workbench and wanted to be able to move it on occasion or at will for various reasons (working on large objects, working on the wall behind the bench, cleaning...) so at first I was just looking for regular wheels - then I found these."
"These leg levelers allowed me to adjust the table height precisely to match the table saw's height and to assure the outfeed table was in plane with the top of the saw."
"Simply drill two pilot holes for each caster - one at 4 3/4 inches and one at 2 inches from the floor, screw in the mounts, add the casters and tighten the caster bolts. I mounted them on the inside length of the bench - mounting the shelf 10 inches high to allow for the caster levers - and this way the casters are not in my way when I have the work table on all fours. Highly recommend these casters for any work table or work bench where you need the flexibility to move it."
"I added these to a Harbor Freight Windsor work bench and they work great."
1'' Low Profile Casters - Color: Gray, Total Capacity for Set of 4: 100 LB. 2'' Heavy Duty Casters - Color: Black, Total Capacity for Set of 4: 220 LB. 3'' Heavy Duty Casters - Color: Red, Total Capacity for Set of 4: 500 LB. Enter your model number to make sure this fits. Caster axle bolt size: 6mm(diameter) x 45mm(length) /0.24'' x 1.77''. Perfect casters for small equipment and small space furniture including ottoman, coffee table, plant stands, bookshelves, shoe bins, toy bins, shopping carts, workbench, underbed storage...
Reviews
Find Best Price at Amazon"very good castors all turn smooth, wheels are great and dont scratch my wood floor with good bearings, pushing my large heavy amp is effortless and can be done with my pinky it rolls so smooth."
"I can move it easily and the breaks are great so it doesn’t move when I’m eating at it!"
"I will be purchasing another set for the other closetmaid cabinet I put them on so it is easy to pull out from the bathroom to clean. Only complaint is the screws are not very pointy at all, and it was a struggle by the 2nd wheel to install by hand with a screwdriver, even into composite board."
"While the two brakes lock the two wheels the wood planer still moves."
"They roll smoothly, lock and unlock with a touch of the toe, and do not diminish the stability of the stands that I mount them on."
"I put on my butcher block and they roll smoothly across my tile floors with little effort."
"I was going to bolt these to 1/2 " plywood to make a big cart for parts, lumber, tools."
"The bearings may be OK, but the wheels are garbage."
Online Best Service™ items includes A 90 Days Warranty. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Mine arrived as a deeper red than I expected from the pictures however I suspected as much as I read other reviews first so there were no surprises."
"Needed to build a dolly in order to raise my new 200lb washing machine up over the baseboard moulding to fit it into a tight alcove."
"I built a custom frame that fits perfectly under my generator, and these casters allow me to move it effortlessly."
"I have used my dolly with the old wheels on several occasions and run into trouble with employees at the front desk due to how much noise they made, as they thought the wheels were damaging the tiled floor."
"My Grandfathers desk chair, which I inherited way too soon, had an issue with its original wheels and all the replacements I tried were just too cheap. I filled in the original post holes with epoxy, let that set up and smoothed it out real nice. And they are not too hard, so they don't hurt the wood floors or chew up the carpet."
"- High quality, easy roll and spin. Took an old eBay desk with cheap plastic wheels and replaced them with these."
"I mounted these wheels on the bottom of my Maccaw cage and I have to roll this thing around every day."
"The cases weigh well under the listed capacity of 880lbs and only get rolled more than 10 feet a few times a year so I figured something cheap compared to the high end Penn Elcoms would be fine but they failed us right from the start."
Best Ball Casters
Universal 5/16 x 1-1/2 mounting stem with metal mounting socket included (3/8" x 1-5/8" hole in wood required for socket). Model number 8BB50GB0GS04- 4-Pack Caster Classics® 2-inch Antique Gold Ball Caster with Wood Stem & Socket contains four (4) casters four (4) mounting sockets. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Pick up a corner, and the casters fall out and it takes 2 people to reinsert them and put the ottoman back flat on the floor so the weight of the furniture keeps them in place."
"Just what I was hoping for in spiffing up a traditional solid wood chair."
"Nice casters for my kid's art desk I slapped together from scrap plywood."
"As advertised."
"Excellent Product, Great Price, Fast Delivery!"
"Used on the legs of a bench/coffee table in front of couc... perfect- rolls smoothly, easy to install."
"Bought these to go on my accent chair for my desk at home!"
"It would be better if they had breaks!"
Best Plate Casters
Simply push down on the foot pedals to elevate your workbench off the floor (3/4-Inch), move to preferred location, then lift up foot pedal to lower table firmly back onto the floor. Easily move heavy workbench to desired location.
Reviews
Find Best Price at Amazon"Since I needed three sets of casters for different power tools, I decided to buy both a Powertec and a Rockler caster set and compare them to find out which one is the best. There are three main steel sections which can be seen in the picture titled "Part Names" with the three labels “Mounting Bracket”, “Pivot Arm”, and “Tilting Plate”. Notice that the Powertec has a much more rounded surface where it contacts the tilting plate, making it easier to slide and decreasing the wear on both this part and the tilting plate. Tilting Plate. Look at the picture with the caption “Tilting Plate Comparison”. Note that the Powertec plate is slightly flared at the top of the picture whereas the Rockler plate is straight. The Rockler also tilts down 1.8 degrees, much less than the Powertec. My guess is that the Rockler’s tilting plate will be more horizontal under load than the Powertec, although this is really conjecture on my part. Mounting Bracket. One minor issue is that the Rockler mounting plate has two sides and a center section that should be bent 90 degrees from each other. Material Thickness. The pivot arm, tilting plate, and mounting bracket on the Powertec are fabricated from steel that is 1/8” thick, or .125”. Finally, when mounting casters on my really heavy table saw, I will relocate the mounting hole on the tilting plate closer to the pivot point (where the 1/4" bolt is located) to put less stress on the plate when raising and lowering."
"I built an 8' long workbench and wanted to be able to move it on occasion or at will for various reasons (working on large objects, working on the wall behind the bench, cleaning...) so at first I was just looking for regular wheels - then I found these."
"These leg levelers allowed me to adjust the table height precisely to match the table saw's height and to assure the outfeed table was in plane with the top of the saw."
"They shipped rattling around in a big box as others have mentioned, which was somewhat disconcerting, but they were not hurt."
"I can move the table full of tools with a single finger and often have to grab the table to stop it because it will roll on it's own once in motion."
"These casters have no problem lifting the bench and it moves very smoothly across the concrete floor."
"Did follow someone else's recommendation to install slightly (0.5-1 inch) - higher placement of unit resulting in lesser clearance."
"I would highly recommend them if your project needs mobility though keeping in mind as stated that each wheel is rated for one hundred pounds."
Best Stem Casters
Includes sleeves.Technical Details:1-1/4" diameter swiveling hardwood caster wheels.Stem measures 1-1/2" long.Inside diameter of sleeve is 5/16".Wooden caster wheels are 5/8" thick.Zinc-plated steel sleeves.
Reviews
Find Best Price at Amazon"These were perfect for restoring an 80 year old dresser we had inherited."
"Replaced from an old chopping block that they were removed before it came to me."
"I was concerned that these casters wouldn't hae the vintage look I needed."
"Perfect for the little antique dresser I was refurbishing."
"worked perfectly on kitchen table."
"Worked out great for replacing the casters on an old table."
"exactly what my antique table needed."
Best Furniture Sliders
Make moving furniture the easiest part of your move or remodel with these reusable SuperSliders Furniture movers. Made of hard plastic and durable rubber foam, these oval-shaped furniture sliders provide proper weight distribution and a secure grip, making it easy to move furniture into just the right place…or maybe just a little more to the left. PERFECT FOR ALL FURNITURE - There is no piece of furniture too large or heavy for these furniture sliders.
Reviews
Find Best Price at Amazon"Works great."
"I was able to move, on semi thick carpet, a solid wood bed with the boxspring and mattress on it by myself as well as two solid wood highboy dressers."
"I was surprised at how easy these slider mats made it to slide a piece of heavy furniture (in my case a powertec leg sled) around, albeit, sitting on carpet."
"I bought a portable desk that I move back and forth daily across carpet in our small house since I have no extra room for an office. Anyway, I had the smaller round version of these, which are great btw, but just were constantly coming out when I moved the desk."
"It always used to be such a hassle, and I could barely muster enough strength to move my living room sectional. The scratches on the plastic side are small for now, and most of them were incurred when sliding furniture from carpet to wood flooring."
"These things worked so well that I can't believe I'd never bought a set before."
"These don't work quite as well as carpet sliders, but that's the nature of the beast."
"We got these just in the nick of time so we could move some heavy furniture over carpet, I only wish I had ordered more, We live in a retirement community and young men with good backs are in short supply."
Best Furniture Pads
Dual Technology - Anti Slip Rubber with 3/8" Solid Felt Core. Includes Adhesive Strips to secure pad to leg bottom to TEMPORARILY SECURE while placing other pads (only use if needed to help align grippers). Pre-Scored Allows you to make almost Any Size -- Saves you Money. Prevents heavy and sharp furniture legs from penetrating through to damage to any type of floor surface. Protects floors. Anti Slip rubber grabs leg and floor. Includes 4 pads that are 4"x 4" - non adhesive.
Reviews
Find Best Price at Amazon"I bought these because my sofa kept sliding all over my tile floor."
"After reading the reviews from other people about how the rubber and felt can separate so the adhesive can get on the floor, I only put these under things we will not be sitting on or will potentially be moved around - dresser night stands, etc."
"My new apartment has new hardwood floors that would've been ruined if I hadn't gotten some kind of pad underneath the legs of my huge chair-and-a-half."
"I used the adhesive to attach the pads to the feet of the couch and wa-la!"
"She had been jumping and moving the couch each time and it was driving me crazy."
"I did 4 and tried to move the couch a little from the opposite end, and it won't budge! Have half the couch done and waiting on my girlfriend to get here to see the difference."
"I bought them for a modular sectional with 5 pieces to keep it from sliding on my wood floors."
"It still amazes me every time I sit on my couch!"
Best Furniture Legs
We finish each leg by grinding off any steel burrs on both sides of the plate so the end product is free of sharp edges and will sit flush with your tabletop. The purpose of Industrial By Design is to provide customers with premium quality table legs accompanied by unmatched service to ensure the best experience possible. Our 16” height legs are made of solid 3/8 inch thick cold rolled steel rod to provide a minimalistic appearance with uncompromised strength. MONEY BACK GUARANTEE: 100% money back guarantee if you are not satisfied with this product.
Reviews
Find Best Price at Amazon"I made a desk out of an IKEA butcher block countertop section and these legs, it came out perfectly and the legs are fantastic."
"We received our set of 4 - 16" hairpin legs in only 24 hours!"
"I made my own table and wanted to give it a nicer, industrial look."
"I wish I could post a pic of the table I made from your product, a live edge white pine desk with clear acrylic risers for a shelf."
"We drilled pilot holes through our wood table, but we still had a little trouble drilling the screws into the table with the legs in place because it's such a tight space for a drill gun."
"very well made and are very sturdy."
"I definitely would recommend this product, the welds looked and seemed secure and I liked how the legs attach via 4 holes instead of 3 (which I have gotten with another brand)."
"SOLID."
Best Furniture Cups
Slipstick CB840 3-1/4 Inch Bed Roller / Furniture Wheel Gripper Caster Cups (Set of 4) Caramel Color
Our patented design cup locks furniture and caster wheels in place without any slipping or sliding on hard surface flooring. Simply slide under bed wheel or furniture leg and instantly protect your floors and keep furniture still.
Reviews
Find Best Price at Amazon"SEX WITHOUT SAILING AROUND THE BEDROOM LIKE A PIRATE SHIP ADRIFT!"
"After some thought and measuring I also got the "Slipstick CB885 3-1/2" Large Non-Slip Rubber Floor Surface Protector" and put those those UNDER these Slipstick Bed Roller cups. I took a pic so you can see the rubber floor protector under these bed roller cups. Now instead of the weight of the entire bed being on a thin ring, it is on the whole flat rubber protector under each leg."
"However, a few days later, the head of the bed started sliding further away from the wall. We are going to be taking them off for now because at least it's easier to wheel the head of the bed back against the wall without the slipsticks."
"Just what we needed for our bed frame on wheels."
"I actually ordered two packages because I have a king size bed and it was short 2 for the other legs on frame but it doesn’t make any difference the bed still does not move at all."
"I bought these after switching to a bed frame with wheels."
"I had a rug under the bed to keep it from moving and to protect the laminate flooring but it was hard to clean under there so I found these and they do work great."
"My girls newly painted bedroom walls should be thanking me!!"
Best Moving Blankets
Made out of thick, padded, heavy-duty material that protects items from being scratched during a move or while in storage. Qty: 12 Pro Blankets Size: 72" x 80" Color: Blue/Black Weight: 35 lbs/dozen.
Reviews
Find Best Price at Amazon"I didn't read the description to notice they were non-woven fabric, but the description lists that clearly enough. Outer box, 3 plastic bands, inner cardboard wrap, a half-dozen more plastic bands, woven plastic bag that is sewn shut, inner clear plastic bag."
"Purchased these for a cross country move and they were perfect!"
"No smell other than what you would expect from new fabric smell."
"You get what you pay for."
"While it not as god as pro quality it's fine for me."
"Does exactly what they're designed to do."
"Good quality stitching but a bit thin."
"These moving blankets are bound with nylon tape with RAZOR SHARP metal fasteners."
Best Furniture Corner & Edge Safety Bumpers
GENUINE ROVING COVE® PRODUCT: All of our product reviews are authentic. LONGEST: Jumbo Pack™ covers 20.4 feet (245 inches) of surface area: 18 feet (5.5 meters) edge cushion + 8 corner cushions -- making this the most surface area covered by any product anywhere. SECURE ADHESION: Includes authentic easy-to-peel 3M double-sided tape (36 feet of tape for the 18 ft. edge cushion and PRE-TAPED CORNERS).
Reviews
Find Best Price at Amazon"The adhesive strips stick to the foam and to brick."
"To install is comes with a sort of high powered double tape strips. They give extra strips of tape somif you mess up you can remove and start over."
"I needed to put some padding on the corners and sides of a steel platform bed (Full Size) and this fit perfectly, with only the slightest amount of stretch necessary to wrap both sides and the foot of the bed."
"With the large roll, you can really customize how much protection you want on a piece of furniture."
"Daughter can easily rip the whole thing off if she REALLY wanted to, but she's done a very good job of leaving them alone."
"Impressed by the adhesive power."
"Cleaning. It, adding adhesive, letting it stick before removing the other end etc."
"Serves its purpose in that he doesn't bump his head on the sharp edges, but it doesn't hold up well, and I find myself constantly reinforcing it."