Best Power Tool Saw Blades
The Blademedic Knife Sharpener is the first Responder for Field Repairs on all types of Knife Blades. Tungsten Carbide-Three Or Four Strokes Will Restore Your Blade.
Reviews
Find Best Price at Amazon"As with the Smith, the tapered diamond rod can be pulled from its stay and rotated 180 degrees to a locked open position for use as a diamond file (sharpening hard to reach items, serrations, etc.). Caution using these Vee's - the body is metal versus the Smith's plastic, so take care not to press downward strongly when using a Vee; these are meant to be drawn through, not sawn through. All in all, The Lansky Blade Medic is a more useful field sharpener than the Smith Pocket Pal, and would serve well; but it would likely ride in pack or kit, not in pocket due to weight and size (as would the Smith, too, for that matter)."
"was I expecting a razor sharp hair popping edge? this tool is simple in the fact that you run your blade through it enough to be able to get the job done until you get time to sit down and properly sharpen your gear."
"I initially thought it would be nice to have this as a good field repair tool for when I'm out hiking in the wilderness, but it's actually very heavy at ~100 grams (heavy for that world, anyway). So just depends on your use: if you're thru-hiking and want a field repair tool?"
"This wonderful tool is an all in one sharpening tool for specialty knives."
"This tool is an all in one sharpening tool for specialty knives."
"This is my second one and I keep it in my backpack for sharpening pocket knives, tactical knives, paring knives, etc."
Use the DEWALT DW4856 reciprocating saw blade set as the perfect addition to your cutting needs, featuring compatibility with all reciprocating saw brands. Set includes six (6) reciprocating saw blades.
Reviews
Find Best Price at Amazon"It's not a bad starter set, but be warned - this nearly 6 inch blade can only cut through 3 inches of material."
"I was able to use the wood ones to cut a whole mess of overgrown trees."
"i bought a ryobi tool set with reciprocating saw."
"I used the 5/8 TPI blade to cut through old fence planks."
"Love these blades I use them for a variety of uses with my saw."
"This is a great general purpose set of wood and metal saw blades for your reciprocating saw!"
"A must have set for anyone using a saw zaw."
"Cut through steel (car frame) with relative ease."
The 18 and 32-teeth per inch blades are 3-inches long and made with Bi-Metal material. T-shank design fits all Bosch and DEWALT jig saws.
Reviews
Find Best Price at Amazon"The one fast clean cut does a good job and cuts really well and easy to hold a line."
"works perfect, Mine had a bad slider that lock the case so it kept opening and spilling the blades everywhere."
"I'm ready for anything now."
"I've used one for cutting a very solid wood door for doggie door installation."
"Works great last a long time and a good price."
"Ran out of wood blades so I decided to try the T shank blades."
"Very good set there is a good verity of blades to use depending what you need them for."
"Keep all your blades in one place. I added a Diamond abrasive tile blade as well."
Best Band Saw Blades
FEATURES: Matrix II High Speed Steel Edge for Heat and Wear Resistance 8% Cobalt Content For Added Durability Wear Rc 65-67 Tooth Hardness For Increased Wear Resistance Alloy Steel Backer for Fatigue Resistance SPECIFICATIONS: Size: 32-7/8" x 0.020" 24 TPI. Matrix II High Speed Steel Edge for Heat and Wear Resistance.
Reviews
Find Best Price at Amazon"The band is weak at the seam not an unusual problem for fine tooth cutting."
"My local tool shop sells the same ones for $40.00 a box of 3."
"I cut a lot of metal and no issues."
"Super value on this 3 pack."
"After a few cuts the blade snaps."
Best Circular Saw Blades
Set includes two outer blades and 3 two wing chippers (3- 1/8" chippers & 3- 1/16" spacers).
Reviews
Find Best Price at Amazon"Following the guide on the case insert, I stacked the left outside blade, a 1/16" spacer, a 1/8" chipper, the .020" & .012 shims and the right outside blade. The dado width was spot on and the 15/32" plywood fit into the dado beautifully."
"I do have slight scoring in the flat side of the cut, but nothing a quick run with sandpaper doesn't get rid of."
"This is a great Dado Set!"
"It's just a hair wider as listed so any groove you're trying to cut for 3/4 inch ply will still work but it will be just an Nth looser than some people will prefer (I know many folks want those joints tight enough to have to bang the piece into place."
"These are very high quality blades & the only reason I gave it for stars is because of my fitment issues."
"Excellent dado set at a great prize , offering smooth dado."
"A very nice, heavy duty set of blades."
"I made a 200% enlargement of the set up directions, but you still need to check out thickness before you mount up the dado to avoid a reset up."
Best Diamond Saw Blades
The Black Widow Diamond blades are designed for quick cutting of hard tile including porcelain, ceramic, granite and marble, without wobble or chipping. 7mm rim height for a longer life and for increased cutting contact with the blade.
Reviews
Find Best Price at Amazon"According the tile guys, this is much better."
"I found the blade to dull fairly quickly when cutting hard stone, plus I broke it ."
"however, it does break down faster doing so after 10 big cuts."
"Tried 3 cuts with the new blade and it cuts no where near as nice as the Black Widow."
"Can't necessarily say it cut better than the blade that was included with my QEP wetsaw.... but I am glad to have another blade in any case."
"But by the fire I finished I quit using the water bottle and just cut the tiles slowly and every thing work fine."
"As good if not better than the "big names" saw blades out there."
"Balance did not improve after at least a hundred feet of porcelain cut as others have claimed."
Best Jig Saw Blades
The JS470EB's multidirectional blade clamp delivers superior grip of T-shank blades (but it does not accept U-shank blades). Its toolless blade-change system offers fast insertion, and it has a blade ejection lever that eliminates the need to touch the hot blade. Its multi-directional blade clamp provides superior grip of T-shank blades while the adjustable dust blower keeps the cutting line clear. Internal precision control precision-machined plunging system and low-vibration design for enhanced accuracy and extremely smooth operation.
Reviews
Find Best Price at Amazon"Also, when sitting down to write the review, I see the priced dropped $8.00 since a week or so ago Oh well. Tight curves, very large range of speeds and the oscillating feature really cuts."
"It came with a good case and it also came with one blade and a plastic protector for the base plate when cutting on a finished product."
"Bosch makes the best jig saws and the barrel grip works really great at cutting complex shspes, odd angles, becels, etc."
"More could have been spent to upgrade this model to the one with a built in LED light and the superior case system but again, pricey and I don't plan on investing in Bosch's stackable case system; this jig saw is the only Bosch tool I own. The Bosch are the best jig saw blades ever, particularly the Progressor blades."
"The variable speed is great, and a very handy feature. Personally, I don't mind this as I don't consider jigsaws precision tools. For what I use this saw for, which is making templates and installing things, the blade canting forward isn't an issue. For precision cuts I'd use a band saw, but because I don't have that yet, I use a jigsaw and clean up with other tools. The tool is a little loud, but that's a result of the very powerful motor, which has NO trouble chewing through two inch thick, extremely hard woods. I haven't used it to cut metal yet, but with good blades and reasonable feed rates I have no doubt it'd do a fine job. The case is excellent and has room for blades to be stored which is great."
"The first one I ordered came with a broken ON/OFF switch."
"After reading the reviews I decided to give this jig saw a try."
"I have owned many top handle jig saws and in my opinion the barrel grip can not even be compared to the top handle."
Best Jointer Knives
Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. About these Replacement Knives These Freud 6-inch replacement planer knives are pre-ground to a razor sharp edge in order to produce the smoothest cut possible. Premium high speed steel stock for the keenest edge and longest life.
Reviews
Find Best Price at Amazon"In the past I’ve always had my jointer blades resharpened but decided to buy these new from Frued since I’ve been happy with everything else I’ve bought from them."
"These are high quality knives but they don't fit my machine."
"If you need to do the same my advice is as follows: - Use a rotary grinding wheel and go SLOW. - Every 5-8 seconds dip the hot end of the knives in USED motor oil for a ten-count. - Grind from only one end, and make sure it's the end you plan to use LEAST since it will loose some of its temper."
"Please ignore the previous comments about long shipping delays, that's not really fair to rate a product low because of Amazon's service."
"They'll serve as replacements until I buy a new jointer with a helical cutter head."
"I was let down by these jointer knives for two reasons: 1) There is a healthy burr on them which required honing, 2) worse yet the blades have a bow in them, which then require firm pressure to the honing plate to knock down the burr."
Best Miter Saw Blades
LU87R010 Thin Kerf Rip Saw Blade. At a Glance: Ideal for ripping hard- or softwood that's 3/4 to 2-3/4 inches thick Thick, heavy-duty plate and anti-vibration design Tough Perma-SHIELD coating reduces friction and heat buildup. Technical Specs: Coating. Perma-SHIELD. Diameter. 10". Teeth. 24 FLAT. Arbor. 5/8". Kerf (K). .94. Plate (P). .71" Depth of Cut. Thin Kerf allows for faster feed rate and reduced waste Positive Hook Angle for fast cutting and easy feeding in ripping applications Large-Tooth, Thin-Kerf Blade Ideal for Low-Horsepower Saws This rip saw blade is ideally suited to ripping hard- and softwoods, and it also delivers strong results when crosscutting wood or working with plywood. In addition to offering faster cuts through tough materials, its large tooth design allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. High-Density Carbide for Maximum Cutting Performance This thin-kerf rip saw blade's 24 teeth are finished with tips made from an application-specific TiCo high-density carbide "ripping blend" that offers improved density, hardness, corrosion resistance, and heat resistance. Perma-SHIELD Coating Reduces Friction and Heat Buildup Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp. 10" Blade Diameter, 24 Teeth, FLAT Grind, 5/8" Arbor, .094" Kerf, 20° Hook Angle.
Reviews
Find Best Price at Amazon"If I need anabsolutely perfect cut, I would cut with this first and then follow up with a second cut slightly inside using a finishing blade."
"I normally run a Forrest Woodworker II combination blade but if there is a lot of ripping to be done its worth the time to change out to this blade."
"Generally plenty of power but adding this blade was like upgrading to double the HP. I had a couple other Freud blades that I knew were awesome but rarely use them in those machines."
"I use it to cut hardwoods such as maple, walnut, cherry, and purple heart."
"Although probably not recommended, I've had the same Diablo blade on my chop saw for the past 5 years, and it still makes clean, precise cuts after frequent use."
"Cut isn't glass-smooth like from my freud premier-fusion, but that's to be expected from a low tooth-count rip blade."
"Though I expected to buy a blade for around $25, when I saw the Freud thin-kerf ripping blade on Amazon, I knew darn well the extra expense would be worth it to get Freud quality. It came as no surprise to me that when I looked to see where the blade was manufactured, it was made in Italy. And hey...once you buyFreud LU87R009 9-Inch 22 Tooth ATB Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating this incredible blade, make sure there are no nails in the wood you are about to cut."
"Now I'm using this blade for my rips and it is a world of difference over the combo blade."
Best Reciprocating Saw Blades
The included case expands to hold 9-inch blades and is designed to fit in DEWALT power tool kit boxes for easy blade storage. Case fits in DEWALT power tool kit boxes for easy blade storage.
Reviews
Find Best Price at Amazon"The blade case fits blades up to 9 inches."
"Pretty good blades and a variety of each, and that rescue blade in there is a monster!"
"They work just fine in my. PORTER CABLE PCC670B 20-volt MAX Lithium Bare Reciprocating Tigersaw, and since the selection of blades Porter cable offers was severely lacking, these were a life saver."
"Great blades."
"He was working on sections of my wood deck that needed replacing and it has made his life and the project wonderful."
"Not the best blades but ok for the money."
"Basically, it's a dewalt plastic case with tons of saws (ones for food, metal, demolition, etc...). It's better to have everything organized, in a nice case, then it is to have them all over your saw case, or all over the truck floor, etc.. Customers love to see contractors organized."
"They seemed to be well made and when the proper blade is used, cuts quite well; and they held up as well as any other blades I've tried. The metal cutting blades cut through electrical conduits and metal studs quite well. I would definitely recommend Dewalt recip saw blades, and if you can find this package with the case you will appreciate its added convenience."
Best Scroll Saw Blades
Color: 18 Pack |. Size: Blade. The product is Easy installation and easy handling.
Reviews
Find Best Price at Amazon"Excellent product, excellent price, excellent shippiong!"
"Olson makes a great blade, and these cut well."
"I’ve done a few projects with them now and they cut straight and work great with radius’s and tight turns."
"Great selection of blades."
"Good price and nice to have a ready assortment."
"good value pack with good variety of pin end blade for different wood."
"Great blades that came with another order."
"The blades fit my saw perfectly and cut with no problem."
Best Table Saw Blades
DeWALT 8" 24T DADO - DW7670. Heavy duty storage case protects blades against chipped teeth and damage.
Reviews
Find Best Price at Amazon"Great quality at a great price."
"Does the job."
"I haven't needed to have them sharpened, but when I do I know I will enjoy sending them off in such a nice case."
"Good dado set."
"Works pretty well for the price."
"These are a good value relative to their performance, I am pleased (and only an occasional wood worker)."
"I love this set."