Best Sharpening Stones
✅ SUPERIOR BUNDLE : Your complete knife sharpening kit comes with double sided (#1000/ #6000) premium quality whetstone, bamboo base for holding the stone, knife sharpening angle guide, a simple instruction manual & detailed eBOOK with lots of TIPS & TRICKS which will appeal at every skill level. ✅ SAFETY : We understand the importance of safety when dealing with sharpening tools, your purchase comes with Silicone base for holding the stone inside Non Slip Bamboo base, this setup will ensure the stone is FIXED IN ONE PLACE while sharpening.
Reviews
Find Best Price at Amazon"It slides off the stone on longer blades and you could end up changing your angle if you are not keeping an eye on it."
"I've wanted to have an actual whetstone for some time."
"The seller also sent a PDF "how to" guide which included the steps on how to sharpen and a quick start guide."
"This stone is great I can sharpen my large kitchen knives and my pocket knifes."
"If you are looking a great sharpening stone, look no further."
"The product came before I expected, excellent quality, great material and very well madel, good decision to buy this one."
"Nicely made and words as advertised."
"Great product arrived on time the base held the stones perfectly while I sharpened my knives to a razor's edge."
Carbides provide quick edge setting, and the specially shaped ceramic stones are designed to give you a razor sharp edge on either standard or serrated edges. Ceramic stones provide a smooth, polished edge for already sharp knives and can be used on serrated or standard blades and are reversible and replaceable. Reversible and Replaceable Carbide and Ceramic Stones for Extended Sharpening.
Reviews
Find Best Price at Amazon"It wasn't that it didn't look impressive or that it was too expensive but in the past I would just get out a few stones and oil to spend some time sharpening knives while camping. After a minute, I decided that this Pocket Pal would still be worth it so I ripped it open, read the brief instructions, and grabbed a relatively dull pocket knife of mine. It doesn't feel cheap and doesn't seem like it will randomly fall apart (I'm big into high quality / durability products and expect any item I purchase to be such no matter the price point) yet it is very light weight."
"I'm a bit of a pocket knife junkie, and am constantly pulling one out to open boxes, packaging, strip a wire, cut tags, you name it."
"I will not use it on my more expensive knives, but cheaper ones, machetes, and older blades work extremely well with this device."
"This little sharpener is the best tool of them all for maintaining the edge on a knife."
"After it arrived, just for S&Gs I decided to try it on a kitchen knife that was so dull, it had been relegated to letter opening and within, no lie, 5 minutes this bad boy had put a paper slicing edge back on it."
"Very well built and capable to provide a service for all types of knives and scissors."
"The edge is a bit shallow but nothing less than what you'd expect from a small sharpening device."
"From kitchen knives, to pocket knives and even a couple of large Bowie knives."
Safe, easy and convenient to use. Features a patented, precision engineered, multi-angle, flip-over knife clamp.
Reviews
Find Best Price at Amazon"I have tried many different knife sharpening products but for some reason my knives did not get sharp enough."
"First time using it takes some getting use to."
"I find myself using my old clamp with these stones."
"Jig was tapped all the way for adjustment screw to make knife tight so I sent it back but the system is awesome for sharpening a consistent angle."
"I’ve been sharpening all of our knives since receiving this, and it works great!"
"This is great for putting the perfect edge on your pocket knife/paring knife."
"Outstanding way to sharpen your knifes."
"It allows multiple angles to allow you to sharpen different types of knives, for anything from an X-acto knife razor edge, to a utility knife edge, or anything in between, like your kitchen knives."
Best Abrasive & Finishing Products
✅ SUPERIOR BUNDLE : Your complete knife sharpening kit comes with double sided (#1000/ #6000) premium quality whetstone, bamboo base for holding the stone, knife sharpening angle guide, a simple instruction manual & detailed eBOOK with lots of TIPS & TRICKS which will appeal at every skill level. ✅ SAFETY : We understand the importance of safety when dealing with sharpening tools, your purchase comes with Silicone base for holding the stone inside Non Slip Bamboo base, this setup will ensure the stone is FIXED IN ONE PLACE while sharpening.
Reviews
Find Best Price at Amazon"Second, the sharpening stone did a terrific job restoring the edge on my kitchen knives that had been woefully neglected. While the stone includes a useful angle guide that can be attached to a blade and the guide gives clear steps on prepping the stone and how to hold the blade when sharpening, it does not illustrate the manner in which the blade needs to be moved across the stone."
"the knife guide helps me a lot in keeping the knife at the proper angle."
"it takes some learning curves but works pretty good."
"I've never used a sharpening stone before, so am still practicing."
"After a while, I'll not need it as I'll get a good feeling of the angle."
"I am very impressed with the level of customer service I received with the purchase of the Premium Knife Sharpening Stone."
"If you are looking a great sharpening stone, look no further."
"The product came before I expected, excellent quality, great material and very well madel, good decision to buy this one."
Best Magnetic Sweepers
SE is proud to bring you this 30” Telescoping Magnetic Pick-Up Tool with 15-lb. This telescoping magnetic pick-up tool has a collapsed length of 7 inches and an extended length of 30 inches, giving this item the benefit of being both compact and extendable. You will enjoy the quality, function and usefulness this 30” Telescoping Magnetic Pick-Up Tool with 15-lb. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"If I had occasionally wiped a bit of WD-40 or some persistent lubricant like Break Free CLP on the wand, no doubt it would still be working fine. I kept the head of the old tool, still with plenty of magnetism, to hold small parts while working on this or that. That has an advantage of slightly magnetizing the parts, and then they will then hold on the end of a screwdriver making them easier to work with."
"It picked up a 25" Snap-on ratchet and a 2' crowbar with ease. The ratchet weighs in at a little over 5 lbs and the crowbar probably weighs a little more then that. If you need to pick up something bigger/heavier then a 25" ratchet, you might want to look into an alternative (mechanical claw) solution."
"This item however does not hold up to its claims. However rolling weight was a little more, I was able to roll a item that weighed 18 pounds. However the end with the magnet is a little large so it might not fit into every nook and cranny on my cars motor."
"The handle is a bit larger than expected and the telescoping bit sturdier than I imagined. It would likely be able to pull something 15 lbs across the ground, but not lift it off the ground."
"I dropped a couple metallic pieces into the disposal and didn't know it until I started it the next day."
"The magnet is so powerful that if you are trying to pick up a bolt, for example, that you dropped under the hood of a car, you only need to position the magnet in the general vicinity of the bolt to pick it up."
"(2) Retrieve them easily from a carpeted floor where tiny pieces are difficult to find."
"When bolts or washers or toold drop somewhere inside the engine compartment or wherever my hands cant reach, this can."
Best Hand Punches
Our rotary hole punch tool will create precise and professional round holes in plastic, vinyl, leather, paper, fabric, cardboard, canvas, cardboard, polyurethane, fabrics, silk, and even rubber. It punches sharp, precise round holes of 2mm, 2.5mm, 3mm, 3.5mm, 4mm and 4.5mm. The extra large punch plate enables better stability and more control when punching through leather, plastic, canvas, cardboard, rubber, polyurethane, fabrics, silk and many other materials. Even if you have arthritis in your hands you'll be able to grip it and squeeze hard enough to punch holes with no problem. Included: 2 extra large punch plates with a screwdriver, eyelet setting pliers with 100 pc eyelets, FREE punch plates if you ever need them plus an EBOOK with tips and tricks on how to get the best results using your new hole punch.
Reviews
Find Best Price at Amazon"By simply placing cardboard beneath the fabric, the punch worked perfectly, even on such a thin material."
"Leather, plastic, foam you name it this baby will punch right through!"
"I've been trying to buy a hole punch for a long time, when I saw the Pro-Master I wanted to give it a try and I was pleasantly surprised."
"Banner says it !"
"For the price, it did a great job of punching relatively clean holes in my old leather belts."
"Punched a hole in a new belt that is pretty thick."
"Best Leather Hole Punch is well made, the instructions are clear and concise and best of all... easily punches a neat hole in my leather belt."
"As a result my belts, which I purchased from Bullhide Belts, no longer fit me. I was a little worried about the hole punch being able to cut through them."
Best Sockets & Socket Sets
The Stanley 92-824 Black Chrome and Laser Etched Socket Set includes 69 pieces that meet or exceed the American National Standards Institute (ANSI) specifications for combination wrenches, sockets, and ratchets. The laser etched sockets provide hi-visibility markings, making it easier to read compared to standard marked sockets. What's in the Box 30 1/4-inch sockets, 33 3/8-inch sockets, 1 3/8-drive pear head ratchet arm, 1 1/4-inch pear head ratchet arm, 1 3/8-inch spark plug socket (5/8-inch), 1 3/8-inch spark plug socket (13/16-inch), 1 1/4-inch extension bar (3-inch), 1 3/8-inch extension bar (6-inch), blow molded case, and color graphic sleeve. About Stanley Sockets and Ratchets Stanley sockets feature the proprietary Max-Drive design, a unique radius corner design which provides 15 percent more torque, making it easy to tighten fasteners and simplifies the turning of rounded corners. 69-piece black chrome and laser etched socket set meets or exceeds ANSI standards for sockets and ratchets.
Reviews
Find Best Price at Amazon"Both sets have a few sizes the other does not have but are very similar (the Stanley has a few smaller sockets and a ¼” wrench, the Crescent has a few larger sockets). The case supplied with the Stanley set is very poor, the sockets can be almost impossible to remove without breaking your nails. Although this is a pretty nice set for the money but I found a much better set for about the same amount of money: Crescent CSWS10 3/8-Inch Drive Socket Wrench Set, 52-Piece. The case for these sockets is much better, everything fits nicely and sockets are easily removed as they are not ‘clamped in’ as with the Stanley sockets."
"The black chrome look is nice, not that looks are important when using a ratchet set, but they do look nicer than the usual chrome socket sets I have seen. The black chrome does make it very easy to see what the socket size is so you don't have to search or squint for sizes like you might on a chrome set."
"The case is awful and frankly black was a bad idea as if a socket is dropped inside of a work area it becomes a pain to locate."
"The tools come packaged in such a way to where the lid of the case is actually not attached to the bottom and is behind it, to display the sockets sitting inside the case. After this, every single socket had to come out of the case to remove stips of foam padding from between each socket, and the plastic of the case. The "snapping" mechanism that holds the sockets in the case make removing the sockets difficult, and putting them back in, as equally difficult, most times using a screwdriver to "pry" each socket out of its correct place in the case."
Best Masonry Tools
SOLID RUBBER SEAM ROLLER Medium firm rubber roller is versatile and rugged Use on string, grass cloth and expanded vinyl and embossed wall covering Set laminates, decals, non-slip strips, appliques Resilient Dura Soft handle provides soft feel- reduces fatigue and offers excellent durability E54D 2 IN. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"EDIT: I just received the new roller today, and the rolling mechanism has been redesigned. I'm updating my review to 5 stars, as this company obviously pays attention to user feedback and improves any weak points in their products."
"72 sq ft and I've been very rough on the roller and it hasn't wavered at all."
"It's not problematic to clean, but expect to do so if the materials you are working have dust or debris on them."
"Applying the pressure evenly on the seems to ensure that nice tight water tight seal."
"I bought this to aid me in laminating the covers of my softcover books and it works perfectly for that purpose."
"I bought this to work with EternaBond roof seal, but would not recommend it for that application."
"Great for laying down vinyl graphics that can't be done with a squeegee!"
"I bought my Marshalltown roller to go with my Eternabond RoofSeal Black 4"x50' tape."
Best Nail Pullers
The Crescent NP11 11-inch nail pulling pliers are designed to pull finishing nails, floor staples, wire and coaxial staples, headed nails, brads, damaged fasteners, and pin nails. NP11 11-Inch Nail Pulling Pliers At a Glance Dual handles make it quick and easy to grip, roll, and remove nails or staples Easily remove nails from the front or back ot the wood Extract nails regardless of size or if head of nail is damaged or removed Forged steel head and handles Rubber grips for comfort and control. Simply grasp the (nail, staple, tack, etc) with the pliers and roll the head of the pliers to quickly and easily remove the fasteners. Dual handles make it quick and easy to grip, roll, and remove nails or staples.
Reviews
Find Best Price at Amazon"The day the tool arrived I was repairing a hole in a drywall ceiling in which the drywall was nailed up instead of using screws. Granted, pulling three drywall nails is a weak test case but the tool pulled them effortlessly."
"I ordered this to pull old rusty and often headless nails out of pallets that we recycle for crafts."
"Pulling all this covering out left hundreds if not a thousand small nails and staples in the wood ceiling and walls studs."
"This tool is just about perfect."
"However, they're great for pulling non pallet nails."
"Thought that this was the cat's meow but found that there is another nail puller that clamps on the nail as you pull."
"If your doing a demo job consider the following: Crescent CODE RED DB24, 24-Inch Adjustable Pry Bar, Nail Puller. Crescent CODE RED DB18X, 18-Inch Indexing Flat Pry bar. Crescent CODE RED NP11 11-Inch Nail Pulling Pliers. Zenith Industries ZN700001 Trim Puller (Use this to get the trim off the wall, for me there is less damage and time)."
"Using a flathead screwdriver is easier and quicker."
Best Tool Sets
VARIABLE SPEED MOTOR - handle every sharpening task, from grinding to honing. MULTI-POSITION SHARPENING MODULE - for precision knife sharpening or various positions for a wide array of tool sharpening or detail shop grinding tasks.
Reviews
Find Best Price at Amazon"The construction is very solid and can turn the most novice knife sharpener into a pro if judging the blade edge. However, I would add a razor sharp blade is not as forgiving as a sharpened blade. Practice With a Cheap Knife: The real skill is when to let go of the trigger so that is does not grind more on the tip of the blade than the recommended "1 inch per second" and following the contour of the knife edge while maintaining proper contact with the belt. It Can Make a Mess: After sharpening 8 or so blades I noticed my dining table (live in an studio so no man cave garage here) covered in shavings and whatnot. I also wished I had a face mask for the first marathon since you will be looking and making excuses to sharpen every blade in the house to make it pass the paper test. Master the Marathon: I noticed that the main difference between say a kitchen knife and pocket knife is the angle since they both use the same main 3 belt grits (coarse, medium and fine). If I’m going to have a sharpening marathon I separate my kitchen and pocket knifes yet use the same belts instead changing the belts per group of knives."
"The Worksharp Knife & Tool Sharpener Ken Onion edition...For 7 months I debated w/ myself over and over about "biting the bullet" and getting a power tool to help me sharpen knives more efficently. If the weight of the knife is all the pressure you use, the blade can easily be "leaned back" and hovered past the belt and the sharpness you seek comes faster. Set the knife into the sharpener, and REST it on the angle guide, using JUST enough pressure to keep it sliding against the guide. This is a great tool for beginners, and a Godsend for experienced sharpeners, but it doesn't possess the power of an angle or bench grinder. Remember that sharpening isn't a race, and if you don't feed your family doing it, its far better to proceed SLOWLY and watch what youre doing. NEVER drag the tip of any knife blade more than 1/2 way off the belt. Start w/ tool OFF, set blade into the angle guide, and using the weight of the blade, and GENTLE guidance, manuver the blade toward the tip, following the shape of the blade. If you are using the "crossbar" blade guide, DO NOT press the knife edge into it, that will dull your knife, defeating the purpose. The coarser belts will produce loads of fragments that can gum up the sharpening guide, cassette workings etc. I sharpened a RUSTY old HC steel butcher's knife, started w/ the coarsest belt I could find, established a "working edge", and went from there. All belted abrasive tools need time/patience to get good, but it'll be less time than with stones!! The "medium grit" belt is normally used for sharpening a well-cared for blade on occasion as needed, the fine grit for semi-regular honing, where you want something more aggressive than a steel, but less than attempting to adjust a primary grind to facilitate sharpness. Also, if you have a combo edge knife, each portion of the edge must be sharpened INDEPENDENTLY. Sharpen the plain edge parts as normally done and then follow the directions for sharpening the serrated parts the way you would a fully serrated blade."
"Aslong as you FOLLOW THE DIRECTIONS you will get great results.keep the edge perpendicular to the belt and stop the tip in the middle of the belt and kill the power you won't get rounded tips.also place the knife in position before turning it on, otherwise you'll end up making you knife a recurve."
"Also, I ordered several additional 3/4 x 12 inch belts in varying grits from Econaway Abrasives (I don't work for them) so I am set for years. If you are looking for the perfect gift for a hunter, fisherman, or knife enthusiast, then this is it!"
Best Hammers
Rock Hammer—created especially with prospectors, rock hounds, contractors, and the everyday user in mind. SE products are quality items for extremely reasonable prices. Head length: 7 inches.
Reviews
Find Best Price at Amazon"Ok, I've broken more axes, mauls, hammers, hatchets and other hand tools than most will ever own in their life. I've used them, abused them, and feel I can honestly say that I know a well-made tool when I see one; whether it is a true Ames shovel or an Estwing hatchet. To the reviewer that said his 11-year old daughter broke it on the first day, got news for him, I'm 6'5", almost 300 pounds, can probably lift my weight plus some, and I am NOT going to break this hammer this year. Considering that I gem-hunt and gold prospect dry placers, that amounts to thousands of blows by a gorilla that knows how to break a tool. Yes, the handle is rubber (overcoating the single forged piece of steel underneath), and yes, it is a hammer. It is a rather BIG rock hammer, the sticker on it said it was 20-ounces, and I didn't weigh it when I got it, but I'm guessing closer to 26-ounces, by the feel of it compared to my ripping hammer (again, I'm stuck on a 11-year old girl breaking this beast...it's like saying, 'and yes, my daughter just came out of diapers yesterday and she threw my 20-pound sledge out in the yard and broke it, right there, on the spot!)."
"I metal detect and I was running into problems where I wanted to metal detect gravel parkinglots. Only a minor con which isn't really a con but sometimes I smash the #*#*#* out of the coins trying to dig them out."
"OIt makes the swing part of the job so much easier on the muscles, it gives the right amount of impact on the target, in the case, rocks."
"I used this for a 6 week field camp as a geology major in college so it's gotten a lot of use in the short amount of time I had it."
"My Grandkids needed some expanding of their outlooks."
"Purchased this as a gift for a fellow rock hound and she absolutely loved it."
"Holy cow this thing is a substantial rock hammer!"
"Hammer works well and feels very good to hold and swing."
Best Hand Staplers & Tackers
Enter your model number to make sure this fits. Flush-nose design solves the problem of stapling in tight spots.
Reviews
Find Best Price at Amazon"But this manual version will drive the longer 1/2 inch T-50 staples all the way in. And it is the longer staples that I use the most of."
"Anyway, I have had this thing for several months and I have used it to help build a turtle trap for my fish pond, several smaller cages for chicks, a chicken house/lay house, and, more recently, I boxed in one end of a three-sided cattle shed to make a larger chicken roost area. It can get frustrating when you have sunk hundreds of staples while wrestling with chicken wire that wants nothing more than to wrap itself back into a roll while you are on top of a ladder."
"Love my easy to use remodeling helper !"
"I use this to attch my watercolor paper with gator foamboard together."
"great tool for our DIY projects, which right now is building a greenhouse."
"Very handy, should have bought it long time ago."
"Really gotta get your grip on to punch this thing."
"Got this and worked great for a few hours of stapling insulation paper to 2x4."
Best Handsaws
This high quality Japanese pull saw from Gyokucho does it all with less effort that a traditional western style saw. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"The cross grain cut picture despite it looks like planed it is not, it is just right after cut, just incredible."
"The first one I bought was a Dozuki dovetail saw when I first started learning hand-tool woodworking. I can honestly say I may not have persevered to this point in my hand-tool woodworking education if I was unable to use a sharp saw. And when you don't have a hands-on teacher, i think it can be a slower learning experience, but it is totally possible to do if you have the passion, determination, and some decent tools. I would advise anyone inexperienced with japanese saws to take a few moments to watch some you-tube videos demonstrating how to properly use this tool. Sometimes this is less painful for my back because I'm standing straight up instead of bent over a saw bench with a western hand-saw. If you are planing on making any type of joints please do yourself a favor and get a Dozuki style saw as well as this one. The stiff back plate on the dozuki (just like the back on a western-style dovetail, tenon, or miter saw) keeps the thin japanese saw plate stiff so that your cuts come out perfectly straight. The bottom line is this: If you use this Ryoba saw for the tasks it was intended for, it produces great results."
"Apparently, it makes a long job short!"
"I'm somewhat new to hand saws and I feel like these are easier to control than the traditional "english" saws which cut on the push stroke as opposed to the pull stroke with this saw."
"This saw is big enough to tackle a big job, but small enough to get into small or tight spaces."
"Super useful for switching between cross-cutting and rip cutting."
"I'm moving to this Japanese hand saw after using an American Shark saw for a while...What a worthy choice!"
"used once so far and bumped the back of my hand on the teeth."
Best Hand Tool Cutters
Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.
Reviews
Find Best Price at Amazon"The handles protect your palm when cutting, softening the feel when applying cutting pressure. Warnings on handles reminds you to ALWAYS WEAR EYE PROTECTION and CUT WIRE MAX THICKNESS 1.3 mm. Spring back handles feel firm and just right for repeated cuts."
"I guess it can't be helped, since the sharp points have to be thin for the cutter to cut. Ah well because of the blades that goes misaligned when you squeeze it hard, this doesnt cut female fan header pins off a strip well."
"These wire cutters have worked well for me so far."
"I generally use these to clean up small wiring like telecom or when i am doing small board mount soldering and i need to clean up some jacket issues or even small overflows of solder."
"I tend to grab these cutters as opposed to a small cuticle scissors or nail clipper as the black tips show exactly where you are cutting when faced with shiny wire and shiny atty posts."
"I literally keep one of these about every two feet on my twelve foot bench so I'm never more than arms reach away from one."
"I tried to cut ducting wire which is really thin but very springy and it managed to chip the cutter."
"I've used it just a couple of times at this point so I can't speak to it's ultimate longevity but it works well. The cutter I was using before I got these was just tool large for the task and I couldn't seem to get flush enough to the board."
Best Pliers
With the Knipex Cobra water pump pliers, you can simply position the upper jaw to the workpiece, push the button, and close the lower jaw. A simple push of the patented push button adjustment maintains jaw size setting and gives you the correct size opening every time. Just position the upper jaw to the workpiece, push the button, adjust the opening, and close the lower jaw. Cobra water pump pliers are constructed from chrome vanadium electric steel, an innovative high alloy, oil tempered steel that ensures longevity. About Knipex Headquartered in Wuppertal, Germany, Knipex is an independently-owned family enterprise steeped in tradition and specializing in the manufacturing of high-quality pliers. 00 20 06 US1 Cobra Pliers, 3-Piece Set At a Glance Adjustment at the touch of a button directly on the workpiece Fast, firm adjustment directly on the workpiece Self-locking on pipes and nuts: no slipping on the workpiece and low hand force required Gripping surfaces with special hardened teeth Pinch guard prevents operators' fingers from being pinched Chrome vanadium heavy-duty steel, forged and oil-hardened. Fast Adjustment Directly on the Work Piece, Just Position the Upper Jaw to the Work Piece, Push Button and Move Close the Lower Jaw.
Reviews
Find Best Price at Amazon"When I hand someone else my Kinipex cobra pliers, it makes them feel like they just had there first kiss, but know every move after that."
"If you want quality, you go with Knipex."
"These pliers are great."
"perfect set, just what a true journeyman needs, very nicely engineered tools."
"The narrow head helps reach in tighter places and there is no sacrifice in grip strength or applicable torque."
"I have had them for a couple years now, I always put one of these in my tool bag for road trips because they are so reliable and can be used in place of standard wrenches in a pinch."
"Throw out your vice grips!"
"I am an electrician and work with conduit frequently."
Best Industrial Tweezers
ESD-10 fine tip, straight (110mm). 1 pc. ESD-11: fine tip, straight (140mm). 1 pc. A full set of seven different high-quality precision tweezers for all types of fine, detailed work.
Reviews
Find Best Price at Amazon"Buying tweezers online was a bit odd, however, I did read up on the reviews to see what others thought. They are super sharp and accurate, which, I have very fine blonde hair, making that a MUST."
"The day after I bought these I was walking in my house barefoot per usual something lodged in my foot."
"These work great they feel like a descent pair that might actually hold up over time."
"If you're looking for tweezers these are great and you get two kinds at a great price."
"It’s also a nice design, they feel good in my hands."
"Awesome tweezer set."
"I was looking for craft tweezers and saw all the good reviews on these, so I tried it."
"These tweezers worked very well when I first received them."
Best Hacksaw Blades
Product Description. A general purpose folding saw for cutting both green and dry wood, plastic, bone etc. From the Manufacturer. The Bahco 9-inch Laplander folding saw has seven teeth per inch and is a general-purpose folding saw for cutting both green and dry wood, plastic, or bone. The Bahco 9-inch Laplander folding saw has seven teeth per inch and is a general-purpose folding saw for cutting both green and dry wood, plastic, or bone. General purpose folding saw with an 7-1/2 -inch blade, 7 teeth per inch, for cutting both green and dry wood, plastic, or bone.
Reviews
Find Best Price at Amazon"I can't speak about the Silky's, I'm sure they are great... but I do own the Corona and find the Bahco to be a much better saw. I find the cutting of the Bahco to be superior and have a more natural 'feel' to it (may be something with the push/pull of the 2 saws, I will have to read up on that a little, don't quite get it). But I don't like the cutting action of the Corona at all, it sometimes tries to bend, drag, and just feels 'dull' even tho it cuts."
"I've cut down small trees with this thing one handed it's great to use it does not leave my side on any hiking or camping trip I take. Knife came very sharp. Cons. 1.)."
"I tested it in the back yard pruning some smallish 1-2" limbs from a pine tree and live oak. This is staying under the back seat of my truck and will be handy for camping or just general use around the house."
"Ideally I'd prefer something a bit smaller with finer teeth like a hacksaw blade, but I had trouble finding such a product on Amazon."
"After throwing a solid sharp on it with my WSKO (22.5 degrees) I processed 51lb of pork for sausage using only that knife...undersized and outmatched and it worked th rough it all."
"Really a very good product, can recommend in good confidence."
"It's located where you would want to grip the handle while in use so I kept hitting the button in the middle of cutting causing the blade to almost close up on me."
Best Hand Files & Rasps
Our Shinto Saw Rasp is a 9” flat rasp made from 10 hardened teeth saw blades held together by rivets and features both coarse and fine sides with the teeth oriented to cut on the push stroke. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"I bought based on the reviews of many wood workers that I follow via YouTube/blogs/forums."
"I use this tool to remove excess dried glue on wood and it seems to work well for that."
"This stuff is amazing."
"Definitely recommend this tool for anyone working with wood."
"Awesome for shaping wood."
"This is a tool that I am loving, so good for shaping wood."
"A tool every woodworker must have."
"Excellent rasp, no clog, quicly cleans out the area."