Best Brake Line Tools
Brake bleeder works by using compressed air for the built-in venturi system and produces a vacuum to bleed and flush the hydraulic brakes and clutches. Set includes 1 piece of 40-inch silicon hose with universal rubber adapter.
Reviews
Find Best Price at Amazon"The hose coupling that fits onto the brake bleed was slightly to large for our 2011 BMW x5 so it pulled a lot of air in."
"Connect an air supply, connect the clear hose to the adapter, connect the adapter to the bleeder valve."
"Love this item."
"Excellent build quality, looks and feels the same as the mightyvac."
"Very well made and produces a decent amount of vacuum."
"Be sure you're working with a good compressor that will get the unit up to pressure."
"Works as described."
"Used a big 150 psi compressor, 1 gallon of brake fluid, and many attempts at bleeding in the proper sequence according to shop manual. Tried holding the hose on the bleeder valve with my fingers during entire bleed."
Designed for use on 3/16” and 1/4" brake lines, fuel lines, and A/C lines. For use aligning, bending, and adjusting brake and fuel lines, fitting new hard lines, and changing the bend of existing lines.
Reviews
Find Best Price at Amazon"Hard to use but helps once you figure it out."
"There is a learning curve to using this tool well."
"Great, works well very good."
"Tool works ok was able to make close bends with it."
"Used it and it did well on the 3/16 steel tubing."
"puts some creases in softer copper nickel lines in the couple of tight spots I used them , maybe I didn't use them properly but seems like poor design to me."
1.Check vacuum operated components on cars and trucks, including distributor advance mechanisms, heater and air conditioning baffles, PCV & EGR valves, headlight cover doors, and transmission modulators. Multifunctional: The Vacuum Pump/Brake Bleeder is a multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations.
Reviews
Find Best Price at Amazon"it was very easy to use did the job."
"I liked the design and accessories of the pump/gauge set."
"My husband said he needed me to find a brake bleeder kit and this seemed to have everything in it that was needed."
Best Brake Lathes
Dimensions: -Overall Height - Top to Bottom:2 -Overall Width - Side to Side:3 -Overall Depth - Front to Back:10 -Overall Product Weight:1.05. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Great item and fast delivery!"
"Good quality at a fair price."
"Good like the one that come with the lathe."
"The product meets my expectations."
"Not much to say about an anti-chatter strap now is there."
"it looks ok did not try it yet."
Best Brake System Bleeding Tools
European Power Bleeder Power Bleeder- pressure brake bleeder, 2 quart capacity, with 45mm threaded adapter (1100) for most European cars including Audi, BMW, Mercedes, Porsche, Saab, Volvo, VW and others. Motive POWER BLEEDER hand pump works anywhere - great for the home, shop, or track.
Reviews
Find Best Price at Amazon"I happened to mess up on the initial purchase, se la vi, but the second item, I didn't know about until mine started spraying and every time I cut an inch off to get past a crack in the line, a new one appeared."
"Took me longer to fill it with brake fluid and pump it up than it did to actually bleed my clutch!"
"Works excellent, turns bleeding the brakes or clutch into a one man job, very well constructed nice thick tubing and tank material."
"My car required 2 bar (30 PSI) to bleed the brakes per the service manual and this worked fine at that high a pressure."
"Best work around to get the black model effect is to hold the cap that goes on brake fluid reservoir tightly and rotate empty brake pump bottle (I think it's clockwise) to two turns holding the bottle tight, put the cap on the reservoir holding the bottle tight after the turn, the pipe will unwind as the cap is rotated on the reservoir."
"Update : Solved the kinky hose problem by adapting the 1/4" quick disconnect adapter from Harbor Freight. Its a pity that the bleeder cap already has the threading for it and all it needs is the disconnect adapter which the bleeder does not have, which when using it resulted in a big frustration with the kinky hose. I should further mention that for those bleeder without the air release valve, it is prudent to loosen the cap a bit to let the air out before disconnecting from the quick-disconnect."
"The unit works fine, the situation with this item 0100 is that according to the mfg website this unit FITS the Land Rover Master Cylinder reservoir with a 42mm cap, well that is the problem it DOES NOT the cap supplied is not the problem size it is too small and the thread dimensions are not that which the mfg states fits the reservoir it is intended to be used with."