Best Brake System Bleeding Tools
European Power Bleeder Power Bleeder- pressure brake bleeder, 2 quart capacity, with 45mm threaded adapter (1100) for most European cars including Audi, BMW, Mercedes, Porsche, Saab, Volvo, VW and others. Motive POWER BLEEDER hand pump works anywhere - great for the home, shop, or track.
Reviews
Find Best Price at Amazon"I happened to mess up on the initial purchase, se la vi, but the second item, I didn't know about until mine started spraying and every time I cut an inch off to get past a crack in the line, a new one appeared."
"Took me longer to fill it with brake fluid and pump it up than it did to actually bleed my clutch!"
"Works excellent, turns bleeding the brakes or clutch into a one man job, very well constructed nice thick tubing and tank material."
"My car required 2 bar (30 PSI) to bleed the brakes per the service manual and this worked fine at that high a pressure."
"Best work around to get the black model effect is to hold the cap that goes on brake fluid reservoir tightly and rotate empty brake pump bottle (I think it's clockwise) to two turns holding the bottle tight, put the cap on the reservoir holding the bottle tight after the turn, the pipe will unwind as the cap is rotated on the reservoir."
"Update : Solved the kinky hose problem by adapting the 1/4" quick disconnect adapter from Harbor Freight. Its a pity that the bleeder cap already has the threading for it and all it needs is the disconnect adapter which the bleeder does not have, which when using it resulted in a big frustration with the kinky hose. I should further mention that for those bleeder without the air release valve, it is prudent to loosen the cap a bit to let the air out before disconnecting from the quick-disconnect."
"The unit works fine, the situation with this item 0100 is that according to the mfg website this unit FITS the Land Rover Master Cylinder reservoir with a 42mm cap, well that is the problem it DOES NOT the cap supplied is not the problem size it is too small and the thread dimensions are not that which the mfg states fits the reservoir it is intended to be used with."
Brake Bleeder and Vacuum Pump Tester 2 in 1 Tool Kit. Bleed your brakes yourself without the mess, works with all vehicle and models. NOTE: This product cannot achieve a full vacuum of -30"Hg though the gauge does show to that level. Includes pump w/ vac gauge, two 2 ft. tubes, vacuum & brake bleeder adapters, brake fluid reservoir.
Reviews
Find Best Price at Amazon"I was planning on needing teflon tape to create a decent vacuum between the nipples and fitments, but one of the fitments worked perfectly on all three calipers with no tape needed."
"this is a very basic brake bleeder kit but it worked very well."
"i was able to do what i needed to with it but the gauge arrived and was already showing a 6 on the vacuum scale so its obviously going to be in accurate."
"i may have been using it improperly, but it wasnt strong enough to pull fluid from my clutch system on its own."
"I ordered this to bleed the brakes on my boat trailer with hydraulic brakes, This little tool worked like a charm as I could bleed the brakes all by myself."
"Used this to prime a Jetta TDI after a fuel filter change."
"seemed well except when you quit pumping it would leak back down, I see it has a release button on it and Would think it would hold that vacuum until you pressed that button which is what I want, am I correct?"
"Never got it to work and when i did i accidentally overflowed the tank and went into the pump."
The Cable Mount Bottle features a stainless steel lanyard that is perfect for hanging the bottle from the bleeder screw or a lug stud. Stainless steel lanyard cable mount on bottle for bleeding without any assistance.
Reviews
Find Best Price at Amazon"When under vacuum the bottle does want to collapse but its not much of an issue since the vacuum isn't that great."
"It need's to be longer.. And the hose that come's with this, Could use 2 to 3 more foot added, At the very minimum."
"Cap center tube is molded into cap for better air protection with removalable inner tube for cleaning."
"I've used this MANY times for bleeding brakes."
"The cable around the bottle will let you hang it while you pump the brakes."
"3) The ascending tube is better quality (smaller diameter) quality than the center tube (thin wall). 4) Bottle thickness is slightly light weight."
"I was using this in conjunction with a Motive Power Bleeder which I bought at the same time, and together it made this the easiest, cleanest and probably best brake fluid flush I have done, and with one person."
"Works great."
Best Brake Line Tools
Brake bleeder works by using compressed air for the built-in venturi system and produces a vacuum to bleed and flush the hydraulic brakes and clutches. Set includes 1 piece of 40-inch silicon hose with universal rubber adapter.
Reviews
Find Best Price at Amazon"The hose coupling that fits onto the brake bleed was slightly to large for our 2011 BMW x5 so it pulled a lot of air in."
"Connect an air supply, connect the clear hose to the adapter, connect the adapter to the bleeder valve."
"Love this item."
"Excellent build quality, looks and feels the same as the mightyvac."
"Very well made and produces a decent amount of vacuum."
"Be sure you're working with a good compressor that will get the unit up to pressure."
"Works as described."
"Used a big 150 psi compressor, 1 gallon of brake fluid, and many attempts at bleeding in the proper sequence according to shop manual. Tried holding the hose on the bleeder valve with my fingers during entire bleed."
Best Brake Lathes
Dimensions: -Overall Height - Top to Bottom:2 -Overall Width - Side to Side:3 -Overall Depth - Front to Back:10 -Overall Product Weight:1.05. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Great item and fast delivery!"
"Good quality at a fair price."
"Good like the one that come with the lathe."
"The product meets my expectations."
"Not much to say about an anti-chatter strap now is there."
"it looks ok did not try it yet."