Best Brake Tools
European Power Bleeder Power Bleeder- pressure brake bleeder, 2 quart capacity, with 45mm threaded adapter (1100) for most European cars including Audi, BMW, Mercedes, Porsche, Saab, Volvo, VW and others. Motive POWER BLEEDER hand pump works anywhere - great for the home, shop, or track.
Reviews
Find Best Price at Amazon"I happened to mess up on the initial purchase, se la vi, but the second item, I didn't know about until mine started spraying and every time I cut an inch off to get past a crack in the line, a new one appeared."
"Took me longer to fill it with brake fluid and pump it up than it did to actually bleed my clutch!"
"Works excellent, turns bleeding the brakes or clutch into a one man job, very well constructed nice thick tubing and tank material."
"My car required 2 bar (30 PSI) to bleed the brakes per the service manual and this worked fine at that high a pressure."
"Best work around to get the black model effect is to hold the cap that goes on brake fluid reservoir tightly and rotate empty brake pump bottle (I think it's clockwise) to two turns holding the bottle tight, put the cap on the reservoir holding the bottle tight after the turn, the pipe will unwind as the cap is rotated on the reservoir."
"I filled up the bleeder with 5 cans and screwed the adapter onto the master cylinder -- perfect fit. I don't think the Black Label bleeder is necessary as the plastic adapter on this one that screws onto the master cylinder seems sturdy enough."
"Update : Solved the kinky hose problem by adapting the 1/4" quick disconnect adapter from Harbor Freight. Its a pity that the bleeder cap already has the threading for it and all it needs is the disconnect adapter which the bleeder does not have, which when using it resulted in a big frustration with the kinky hose. I should further mention that for those bleeder without the air release valve, it is prudent to loosen the cap a bit to let the air out before disconnecting from the quick-disconnect."
Brake Bleeder and Vacuum Pump Tester 2 in 1 Tool Kit. Bleed your brakes yourself without the mess, works with all vehicle and models. NOTE: This product cannot achieve a full vacuum of -30"Hg though the gauge does show to that level. Includes pump w/ vac gauge, two 2 ft. tubes, vacuum & brake bleeder adapters, brake fluid reservoir.
Reviews
Find Best Price at Amazon"I was planning on needing teflon tape to create a decent vacuum between the nipples and fitments, but one of the fitments worked perfectly on all three calipers with no tape needed."
"i was able to do what i needed to with it but the gauge arrived and was already showing a 6 on the vacuum scale so its obviously going to be in accurate."
"i may have been using it improperly, but it wasnt strong enough to pull fluid from my clutch system on its own."
"It more less does what it says, but it could use are much larger reservoir and longer hoses."
"Used this to prime a Jetta TDI after a fuel filter change."
"Good solid product other than the hoses it comes with."
"The fittings for the bleeder screws on my 2004 Silverado did not stay in place."
"seemed well except when you quit pumping it would leak back down, I see it has a release button on it and Would think it would hold that vacuum until you pressed that button which is what I want, am I correct?"
Lincoln Lubrication Industrial Vacuum Brake Bleed Kit is designed to operate with compressed air to bleed up to 2 quarts per minute. Maintains desired flow rate and contains include 6 feet bleed hose, master cylinder evacuation hose, hanging hook and bleed adapters.
Reviews
Find Best Price at Amazon"(Fyi you can get a small cheapie @ Wmart for $50). I bled my brakes, but the gravity fluid feeder did not fit my master cylinder (2007 Milan Premier) correctly. The bleeder is like a Vac, it sucks out the fluid coming out the bleeder screws while the brake is being pumped. The tube is clear, so you judge how much air vs fluid is coming out of the brake bleeders. Also, when it comes time to empty out the fluid, it's VERY hard to open the plastic jar where the fluid is collected."
"I purchased another brand power bleeder but the brake pedal always felt squishy and there was still air in the lines. Used to to bleed and flush the bake fluid All I can say is Hallelujah, my BMW brakes are now back."
"The rubber on the house makes a good seal to suck brake fluid and not leak all over the floor. Update: 13 months and the the bottle you put on the master cylinder reservoir to hold extra brake fluid now sucks in air and then dumps all the brake fluid into the master cylinder reservoir and then overflows out onto the floor."
"If there were less plastic I'd say it's a pro tool, but even with the plastic a pro could benefit from this."
"I made the mistake of raising car, taking off wheels, pouring in new brake fluid etc. I did and as soon as I attached the clear bleeder hose (#2 in diagram) it pressurized (not suction) and shot the wad of grease across the room onto the wall. I couldn't believe it it happened so fast so I unplugged and did again and this time the whole brass fitting with "bleeding adapter" shot off and I did not find for a few days. That above is more usage. The big problem I had is that there is a thumb controlled on/off toggle and whether on or off-as soon as I plugged it into compressor air leaked by on the screws that hold that switch on."
Best Brake Lathes
Dimensions: -Overall Height - Top to Bottom:2 -Overall Width - Side to Side:3 -Overall Depth - Front to Back:10 -Overall Product Weight:1.05. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Great item and fast delivery!"
"Good quality at a fair price."
"Good like the one that come with the lathe."
"The product meets my expectations."
"Not much to say about an anti-chatter strap now is there."
"it looks ok did not try it yet."
Best Brake Repair Tools
Made in the USA, Lang Tools (279) Brake Caliper Press allows you to work on various single, dual and quad piston calipers. Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons.
Reviews
Find Best Price at Amazon"It's way easier than using the old pad and a pair of channel locks, and is the proper type of tool to use for compressing the piston anyway."
"It makes resetting the piston so easy, much better than a block of wood and a C clamp."
"Works great."
"Such a simple tool and a great idea!...arrived yesterday and I was using it today."
"Works like it is supposed to."
"Cheap alternative to the tool trucks tool that's the same thing."
"Works great to press in caliper pistons."
"I wish I had this tool years ago."
Best Hand Tools
Drive Click Torque Wrench lets you work with confidence, eliminating guessing and the common tendency to overtighten fasteners. Simple and easy to use, this wrench has a reversible ratcheting head that drives fasteners in both directions and measures torque in the clockwise direction. drive torque wrench (1) Storage case (1) Operator's manual with torque conversion chart. Wrench emits a click that can be heard and felt when the preset value is reached.
Reviews
Find Best Price at Amazon"Update 9/18/2015. I got my replacement yesterday and I'm really satisfied on how Russ from Tekton took care of this, I asked how to return the other original item and instead let me hang on to it."
"I asked a local mechanic to verify that the tool was working - he said it seemed fine, but I cannot get it to click at all when using it set to 108 ft-lb (well within it's specified range) to torque the axel nut on my motorcycle. When talking with them on the phone, the manufacturer admitted that this type of torque wrench has a design flaw which makes it easy to inadvertently break the tool: The instructions are clear that the tool must be stored at it's lowest setting. But if you loosen the tool to just BELOW it's lowest setting, (which the design of the tool makes far too easy to do), it is permanently damaged."
"This 1/2 inch drive socket torque wrench is ideal for that 13 to almost 203 Newton Meters (Nm) range that applies to larger fasteners on a mountain bike (such as the bottom bracket and freewheel), and to make sure undue stress is not being applied to the carbon fiber frame or components. (you have to consider dynamic versus static loading when conducting testing) Still, a deviance of only 0.8% is well within the 4% Tekton claims and is very accurate for a torque wrench in this price range. Also, the feel of the Tekton 24335 is much more intuitive during dynamic loading and when you reach the limit in torque you set, the click and swivel of the head is sharp, loud and easy to notice due to the roller pin rolling over the roller bearing. That is simply a huge amount of difference and when you combine that with the fact that the Tekton 24335 is so accurate, it makes choosing the Tekton easy. So far, I have had my Tekton 24335 for about seven months and have used it not only on my bikes but also with some light auto work, and the wrench has been both accurate and performed superbly."
"The adjusting mechanism was very rough, and when adjusting to the upper end of the range, difficult."
"Broke after just a few uses.Weird grinding noises when changing torque setting, and no longer clicks when torque setting is reached."
Best Body Repair Tools
Good for 40 hours of light solvent filtering work and 8 hours of concentrated solvent filtering.
Reviews
Find Best Price at Amazon"Used this for 10+ hours while painting a car."
"Used when I was installing fiberglass insulation in my basement."
"Used these when sealing my deck."
"Simply great for home use."
"Overall good but I wish the head straps where better quality."
"It is a useful tool when around toxic vapors."
"Works great and price is a bargain."
"I noticed it stopped filtering extremely quickly though."
Best Measuring Tools
Correctly tightening fasteners to a vehicle or equipment manufacturer's torque specifications ensures parts are properly secured without being damaged. When the preset torque value is reached, a reliable mechanical operation inside the handle produces a click you can hear and feel, alerting you to stop applying force. Built for consistent performance and years of dependable service, the mechanical design doesn't need batteries, and the allsteel construction has no plastic parts to break or wear out. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Now, that may be great for lugs and such but there are some really hard to get to spots on my car that require greater than 100lb torque specks (one I know off the top of my head is 146 ft lbs)."
"Only used it for a little while but so far so good."
"I regularly use it at the higher torque settings and it works great and is easy to use, see, and adjust."
"This is a really good wrench. I just did the job this week and used this to tighten the axle bolt to 140 lbs."
"One of the two retaining bolts at the head of the wrench fell out the first time I used it."
"This thing is one serious wrench."
"Good enough for what I need it for, which is primarily torquing lugnuts."
"LOVE this thing!!!"
Best Tool Trays
Are all your sockets in one spot but unorganized therefore wasting your valuable time searching for the right one? The spring loaded ball bearing clips hold the sockets tightly in place and will keep them on holder even in upside down applications. Keyhole slot makes it easy to install the socket rail to the wall or workbench. Click the "Add to Cart" button now to get your BLUE Olsa Tools 3 Pcs Kit Aluminum Socket Organizer. ★ SPRING loaded ball bearings on each clip hold socket FIRM and SECURE.
Reviews
Find Best Price at Amazon"Purchased 5 sets and to extra 3/8'' rails and mounted them to plywood so the don't move."
"In the past I've tried the plated steel version of a strip socket holders & found them to be a waste of money They would end up rusting and the sockets were so hard to put on & take off that I ended up bending them all up. I thought these were a bit pricey but that changed when I started snapping on my sockets. "EDIT" I wrote this review a year ago and never hit the "Submit" button."
"My only suggestion would be to have Osla tools label each individual place with the socket size that should go in order...other than that it is great."
"The sockets slide perfectly,Not sloppy or hard to slide. If your wondering if you can use your previous plastic socket adapters from another socket holder you really can't."
"I bought a large socket set years ago from a big box retailer. These Olsa socket holders are a very high quality set. If I had to find something to constructively criticize, it might be simply that the rubber end pieces might eventually crack and not stay on."
"I came across this on Amazon and seen it held up to sixteen sockets and i gave them a try' love them they work great."
"I was able to eliminate the plastic suitcase style clamshell that my 25 year old Craftsman socket set came with - it took up the entire top drawer of my tool chest."
"I just received these a week ago (2 - 3 size sets) to attempt to get my years of socket accumulation organized."
Best Tool Sets
What's in the Box Tap and Die ratcheting "T" wrench; small tap adapter; medium tap adapter; die adapter; sliding "T" for adapters; 34 taps; 34 dies, SAE and metric screw pitch gauge; #5 screwdriver; blow mold case. Enter your model number to make sure this fits.
Reviews
Find Best Price at Amazon"Numbered coarse sizes are: 4x40, 6x32, 8x32, 10x24, 12x24, Numbered fine size is: 10x32, Inch coarse sizes are: 1/4x20, 5/16x18, 3/8x16, 7/16x14, 1/2x13. Inch fine sizes are: 1/4x28, 5/16x24, 3/8x24, 7/16x20, 1/2x20. Metric coarse sizes are: 3x0.5, 3x0.6, 4x0.7, 4x0.75, 5x0.8, 5x0.9, 6x1, 7x1, 8x1.25, 9x1.25, 10x1.5, 11x1.5, 12x1.75. Metric fine sizes are: 9x1, 10x1.25, 12x1.5. Pipe coarse size is: 1/8x27 NPT. Pipe fine size is: 1/8x28 BSP."
"We ordered this set as a gift for our son who works on cars a lot and mentioned needing something like this."
"Used on brake system of my car,To clean up treads.Handle works great and makes it real easy to thread and Other things."
"Tapped the steel cradle frame in my car for 2 bolts."
"Great tool specially the handle, it's a wratchet very clever."
"I have never had luck getting the taps I wanted and the quality I was looking for in a set until now."
"Great product - as is the case with all GearWrench tools."
"The best kit I have been exposed to."
Best Applicator Tools
The minus (-) sign indicates less water (so more foam is produced), and the (+) indicates more water (so less foam is produced). ☆Variable, adjustable spray nozzle for accurate mixing and foam generation.Turn the top knob right / closed to get the thickest mixture, adjust the nozzle to get a proper spray pattern, and let it loose.
Reviews
Find Best Price at Amazon"Pink for car soap and only need to fill this about 3/4 of the way with water to wash my large SUV and even less if I'm doing a sedan."
"Don't waste your money on any of those name brand foamers."
"Great product for cost, easy to use."
"This is a great addition to the truck cleaning tools I have and I may even bring this to the fire station from time to time."
"Car wash can be expensive sometimes, especially if you ran into those ones that cost you 15 dollars and the car came out just like you can even do it yourself."
"If my cars are not that dirty it will wash 2 with one fill or wash my dirt bike 2 times."
"I dropped it a few times bc I’m clumsy and it didn’t break or chip or anything, so definitely quality."
"I would recommend this to anybody who washes their own car and has a small pressure washer."
Best Fuel System Tools
With this amazing inflator,you won't need to spend any more money at the air pump at a service station!The pump is rechargeable so it is always ready when you need it,if it is depleted you can plug it in and use it too.It comes with an internal battery for use on the go and it has AC/DC adapter,charging cord as well for when you are at home or in the car. ●Pls connect the inflator with car charger instead of connecting with the wall socket while pumping something,because the output of wall socket can't reach the current required when the inflator works. The output airflow volume is about 12LPM, if tire is big, the working time will be longer. ●Flat tire emergency inflator-rechargeable lithium battery,can be charged with 12V car charger or 110V home charger.The inflator can fully pump a car tire in 15 minutes when you have a flat tire.
Reviews
Find Best Price at Amazon"The first time, I was concerned with the display showing a rapid climb in numbers. Turns out the display during that phase is counting seconds - how long it takes to complete, and not air pressure. Update: The numbers can be cycled to show elapsed time or current inflation reading. I inflated two tires on a hand truck / dolly and two bicycles which were completely flat. The charge gave up the ghost on the fourth bicycle tire. So much easier than carting stuff to a gas station or pumping by hand."
"I thought about using this "portable" device to inflate my motorbike too, but the extra step of bringing my bike to my car, and see ^^ above ^^ dissuaded me. I considered getting an AC to DC power supply, then I could just bring the "portable" inflator to the house and use an outlet. A decent AC to DC power supply capable of outputting 15A would have cost at least $50. I guess I could have used my bicycle floor pump, but the sweat effort I once exerted trying to top off a single car tire quickly dissuaded me. This can be fixed by purchasing a Topeak Pressure-Rite adapter, which has a check valve built in. I also bought a 6 foot air hose extension, because I don't like squatting by each tire as it's filling. The buttons are small, spaced closely, and have a long throw. This made it a little difficult to press, so I resorted to using my finger nails to get the proper reach I am sure the plastic will wear out with my hard finger nails pressing into it."
"I love the portability and for quick inflation needs."
"Takes getting used to but when you do."
"Very good support when contacted through email."
"Works great..took about one charge to inflate a car tire...but it worked."
"I recently purchased bikes for the family, and also had a slow leak in a car tire (not to mention having pool floats), so it seemed like a good time to buy some sort of air compressor to help solve current and future problems."
"Only good for occasional use."
Best Diagnostic & Test Tools
is left behind by the other wireless and handheld code readers. All GM brands, including Chevrolet, GMC, Cadillac, Buick, Saab, Saturn, Pontiac, Oldsmobile, & Hummer All Ford brands , including Ford, Lincoln, & Mercury All Chrysler brands , including Chrysler, Dodge, Jeep, Ram, Plymouth, Fiat, & Alfa Romeo All Toyota brands , including Toyota, Lexus, & Scion All Nissan brands , including Nissan, Infiniti, & Renault All BMW brands sold in North America , including BMW, Mini & Rolls Royce All Honda brands sold in North America , including Honda & Acura (2003 models and newer) All Volkswagen brands sold in North America , including Volkswagen, Audi, Lamborghini & Bentley. As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data).
Reviews
Find Best Price at Amazon"This app imo is awesome 1st I am a used car dealer I need a fast OBII that is accurate and that can do a basic scan of all vehicle to make sure the car can pass emissions and to check for trouble codes or pending codes when a check engine is not on. Except I noticed on this bad boy I can see when the last codes where erased on a vehicle so I can weed out those dealer cars that clear codes on their problem child cars as they enter the auction. It goes to auctions 4 auctions a week and probably scans at least 50 cars per auction. I can scan vehicle almost on the auction block if need be for those cars that just appear that you never saw parked in the sale lot.. Also for kicks i scanned a Maserati and it worked..Scans Mercedes c class to."
"Personally I do not like this it seems that now you are forced to buy all the extras in the app since you are paying $99 for the Adapter, I have 4 other OBD2 Bluetooth adapters that work with torque and other apps and provide very similar information, BlueDriver is more advanced being able to Read/Clear Enhanced Codes (e.g. ABS, Airbag, Transmission, etc.)."
"I leave the module plugged into the OBD2 port on my 2011 Mercedes GL350 (Diesel) constantly since I purchased the BlueDriver in June, 2017. I am towing the trailer again this week with the real-time logging running, when yesterday, on hwy 93 in Idaho, the middle of nowhere, the engine dies! We miraculously find a place to safely pull off the 2-lane (no shoulder) highway and my wife starts calling our subscription towing service, I look at the BlueDriver app now that we are stopped, and I can now see a warning that the fuel pressure is low. My wife re-starts the car, no leak, so we put on the pretty cover, cleaned up with simple green and a paper towel, and head down the road."
Best Pullers
The OTC 9-way slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
Reviews
Find Best Price at Amazon"This was Ideal for what I needed, Had a stubborn wheel bearing and worked our great."
"Well made quality product."
"This presses out the bearing and allows you to press in the new bearing without ever removing the steering knuckle form the car."
"This is one fantastic tool !"
"This was purchased to use in an automotive shop."
"Nice set......fixed my broken front wheel lug studs the right way on my 08 Honda odyssey after One of the big tire chain shops ran them on with an impact gun instead of using a torque wrench like an experienced tech would."
"great set, worked perfect for pulling the hub assembly off my wifes van."
"Pretty nice kit, well built."
Best Spark Plug & Ignition Tools
The set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder. This provides space for the left hand thread remover to bite into the stainless steel plug tip so it can then be pulled.
Reviews
Find Best Price at Amazon"I gave 4 stars because the manufacturer explains how to push the ceramic down so the tool can 'bite' into the metal portion of the spark plug."
"needless to say, the truck ran like complete crap and required the infamous plug change. One bit of advice, be sure to coat the extractor end (left-handed threaded part that goes into the plug) with anti-seize first. once you remove the first broken plug with ease, ignore that uncomfortable feeling in the front of your pants. that's just the raging excitement you got from realizing that you don't have to go through the terrible task of pulling the cylinder heads."
"I am starting to think it is quicker to snap the plugs and use this tool to remove them, just make sure you have some big deep sockets, long extensions, and universal joints first."
"the products with two or less rings had issues of breaking this one had four which indicated it was the newest to date and did remove all the broken plugs."
"After doing research and calling (for laughs mind you) to dealers and repair shops to get quotes for changing out 8 plugs - which pricing was coming back at a range of '$300 IF no plugs break, but they break so it is $50 per plug which could be $700 total', to a rate of '$400 for the plugs and $100 a shop hour for any plug that breaks, and they all break', I decided that it was time to invest the $60 for this tool. So the $$$ I saved from the average $600-700 it would have cost for a shop to do it, I got this tool, plugs, an air compressor, 50' air hose, air tools and several new sockets and hand tools."
Best Steering & Suspension Tools
In. POWERMODE. (L configuration), LUGSTRONG. gives you 200% more torque than any other lug wrench tire iron on the market! GUARANTEED FOR LIFE- We designed LugStrong to be the last wheel lug wrench you ever need to own.
Reviews
Find Best Price at Amazon"Very flexible with different lug options, and if you need it, it has a 1/2" drive socket for any other socket."
"Bought to go into a 1966 Ford Galaxie with new tires and custom lug nuts, so required thin walled wrench."
"The way this lug wrench folds down is awesome."
"The 1/2" socket adapter stores on the end of the silver crossbar, so make sure it doesn't drop unseen to the ground when assembling the wrench at night."
"I'd like to counter one piece of feedback another reviewer made about the leverage you can attain with this device as the product picture is deceiving (in this case in your favor)."
"I think it is a very useful tool and have ordered two more units to give as gifts this Christmas."
"definitely better than the one the came with the car - fit lugs perfectly."
"I bought this lug wrench for my wife when I was deployed and she had to use our tools to remove a trailer tire because the lug wrench from our truck did not fit the trailer lugs."
Best Riveters
Patented structure increases power and reduces shock Shorter handle with double compound hinges that maximize leverage Includes Hand Nut/Thread Setting Riveter 6 interchangeable mandrel/nosepiece sets in Metric M5, M6, & M8 and in SAE 10-24, 1/4-20, & 5/16-18 Includes 10 pieces of each of the following rivet nuts: M5, M6, M8,10-24, 1/4-20 and 5/16-18 Versatile and powerful hand nut/thread setting riveter, takes the hard work out of setting rivet nuts Ideal for working in hard-to-reach area Ergonomic grip for easy operation. Includes 10 pieces of each of the following rivet nuts: M5, M6, M8,10-24, 1/4-20 and 5/16-18.
Reviews
Find Best Price at Amazon"I finally decided to give the Astro kit a try, recognizing that it's Chinese made and might have some issues. A drop of heavy oil at each pivot point, and a little light grease on the sliding quill that holds the mandrels makes all the difference in the world. This is due to the fact that the bore through the tool body is at least 1/16 larger diameter than the "pulling bar" that slides through it."
"There were open holes that were missing the flush mount rivets so by using this tool we were able to use the proper insert and install it with this riveter and then install the screw in bolt as needed. Then open your tool so the arms are wide and insert that end into the hole and compress the tool using equal strength and straight on, do not try and insert at an angle."
"Make sure you press evenly and you can compensate one side to the other need be. Adapters switch out VERY easily which is great."
"When installing the rivet just start out by only partially threading on the rivet for the first crimp then adjust how far the threads are in the rivet for the final crimp."
"I recommend before using this for the first time thread up some sacrificial rivet nuts and squeeze the tool to watch and get used to what happens when you operate the tool."
"Wish it had additional fittings for smaller riv/pim nuts, but it has performed well thus far (at least 50 times)."
"Tool worked great - take care to read the instructions and oil the tool before use."
"Get about 5 inserts each."
Best Parts Washers
This 20 gallon parts washer with a 12 gallon solvent capacity can clean small to medium size parts quickly. Max pump output: 192 gph flow rate (w/ flexible pipe); max pump output: 318 gph flow rate (w/o flexible pipe); recirculates 2.6-3.2 gpm of solvent.
Reviews
Find Best Price at Amazon"The under tray is a great place to set a part for draining, and the catch basin makes draining the main basin a snap (but be aware the catch basin only holds about a gallon of liquid at once) and the drain plug is a serious metal piece."
"The product's instructions limit the unit's use to water based cleaner and, even then, non-chloride based. The unit I received has numerous missed spots, large run areas and paint flaked off when tightening bolts on assembly. If you're mechanically inclined, the unit has few parts and goes together quite easily."
"This is a nice little wash tank for the price."
"We use this device in a fire station where we have to constantly clean and maintain our chainsaws."
"easy setup ."
"Very nice addition to my shop ...I love that it is on casters ...very solid and moves easily..works very well..very happy!"
"Very good quality and worked as stated."