Koncocoo

Best Solid Surface Router Bits

CMT 851.502.11B Bowl & Tray Bit With Bearing, 1/2-Inch Shank, 1-1/4-Inch Diameter, Carbide-Tipped
The CMT Bowl and Tray Bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. Create bowl and trays, rout grooves or sign lettering, unique boxes or more craft items.
Reviews
"This is my first foray into bowl and tray cutting so I wasn't sure what to expect."
"It was obvious the bit was just thrown in the shipping box along with the product box as separate entities."
"I bought this bowl bit for a hall bench project with a dished seat."
"Cmt bits are noticeably better than anything I can get at the local big box store."
"Perfect with the collet extension."
"The router bit is fine."
"This does all that it says with excellence!"
"Another great CMT product."
Find Best Price at Amazon
KSEIBI 103119 1/4 Inch Shank Tungsten Carbide Router Bit Set Woodworking (12Pack)
■ 1Pcs Roman Ogee Bit: Perhaps the most popular of all edge-shaping bits, Roman ogee router bits have a distinctive profile for cutting classical decorative detailing into the edges of tabletops, picture frames, vertical stiles, and horizontal rails. ■ 2Pcs Rounding-Over Bit: Use this edge-shaping bit on the edges of shelves, tabletops, chair arms, and other places where you'd like to round over a sharp edge. ■ 1Pcs 45-Degree Chamfer Bit: This edge-shaping router bit cuts a 45-degree angle, called a chamfer, into the edge of a board or panel. ■ Made of durable 45# High-Carbon-Steel and carbide-tipped tungsten carbide tip that stay sharp and are long lasting, perfect for making controlled, safe cuts for your cabinet-making, home restoration or other woodworking project.
Reviews
"A great bit set, bought this because I needed a new set after losing my last set a job site."
"Definitely reccommended buying if you need router it's for wood work."
"This company uses the good steel for this parts!"
"I needed something cheaper then $20/bit for my hobby work with my router."
"These bits are really nice and have held up really well to quite a bit of use."
"Awesome router blades."
"The problem is about half of the shanks are to large to fit in the router collet, thus they are unusable."
Find Best Price at Amazon
MLCS 9177 Brass Router Inlay Kit with Router Bit
This solid brass inlay kit will fit your Porter Cable®, Black & Decker or any router with a manufacturer supplied adaptor for Porter Cable® bushings. This solid brass inlay kit will fit your porter cable, black & decker, or any router with a manufacturer supplied adaptor for porter cable bushings. Enter your model number to make sure this fits.
Reviews
"Looking at the kit, I was quite confused, because I couldn't see a bit, at first. The bit, which in the description of the product is described as a 1/8" bit (1/4" Shank), is not a 1/4" shanked bit. The new bit chucks fine in my 1/4" reducing collet, so if you'd rather have a 1/4" shanked bit, they have one available for the kit. The 1/8" shanked bit with the 1/4" reducing collet, should work fine in a 1/4" router. The standard centering pin not working issue seems to be common with these inlay kits. I've read of other kits not being able to use standard centering pins and during the time I was exchanging emails with MLCS, I obtained a Freud inlay kit."
"Takea all the work out of doing inlays."
"The product picture clearly shows a template -- do not be fooled, it is not included."
"My kits came with everything but the bit itself broke within 10 minutes of using it."
"FYI...you only get the router bit and bushing."
"I, too, was disappointed to not receive the butterfly inlay included in the sales picture."
"When I ordered this "Inlay" kit it was supposed to have a template for making the bow-ties; but what I got was just the 1/8th cutter and the brass Router plate fitting."
Find Best Price at Amazon

Best Joinery Router Bits

Freud 1-3/4" (Dia.) Adjustable Tongue & Groove Bit Set with 1/2" Shank (99-036)
Style: Adjustable Tongue and Groove Router Bit Set, 1/2-Inch Shank. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. Freud router bits feature TiCo Hi-Density Carbide for maximum cutting life and are individually balanced; providing a cut above the rest. About this Adjustable Tongue and Groove Bit Set Freud's adjustable tongue and groove bit set is ideal for producing perfectly fitted tongue and groove joints. Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and groove widths of 7/32" to 3/8".
Reviews
"At the narrowest setting (no spacers), the panels fit perfectly without binding. The bits handled the hickory well but not sure how many more stiles I can cut without burning."
"This cutter is not exactly the profile of the story bought window stools, but close enough, provided you don't cut into the leading edge of the store bought stool."
"I was confused because aligning a straight edge against the cutting edges under a certain angle gives the impression that the teeth edges are not parallel and might slant inward, which might be desirable for flooring parquet where you need a really tight fit, but in fact, careful alignment of the straight edge clears that false impression: the teeth are perfectly aligned vertically, although they do have each a slight slant forward and backward (what Freud describes as "Freud's exclusive design features a tongue cutter with opposing shear angles to ensure a flawless finish") and my next experiment is to use them for edge-joionting."
"In addition, when you want to do the copes, all you have to do is raise the bit in your router table or shaper table to put the cope profile at the right height. The picture that is shown for this bit is actually upside down as it would be deployed in a router or shaper table, the profile at the top of the picture is the stile moulding profile, and the profile shown at the bottom of the bit does the copes in the rails."
"If I didn't want the thin edge to be there I had to raise up the bit, and then my detail was too deep for my liking, so this one is better for me. When you have to drill a hinge cup hole into the back of a door, you don't want it to pierce through the front side of this detail after you are all done with the door. Having the option of keeping the bit a little lower creates more of a safety buffer, and is more attractive to my clients when you view the door from the front."
"There are NO instructions either with the bits (other than a little chart to show you what thickness spacer to use for various thicknesses of stock), on the Freud website or on the web."
Find Best Price at Amazon

Best Router Door & Window Bits

A.G.E. Series by Amana Tool MD502 Raised Panel Door Making Carbide Tipped Router Bit Set with Back Cutter with 1/2-Inch Shank, 3-Piece
This 3-piece set combines the 2-piece Stile & Rail cutters with one Horizontal Raised Panel bit with back cutter. Enter your model number to make sure this fits.
Reviews
"I bought these to build raised panel doors for the back bar cabinet I built over the winter."
"My husband was making door fronts to match existing cabinets."
"This was my first time making raised panels and I have to say this is a great cabinet bit set."
"After just a couple of practice runs, I was able to make my first set of raised panels that looked terrific."
"Excellent set."
"Great set of router bits that perform as expected."
"Used them to make six doors...it worked great."
"I am new to Woodworking, and making doors are very important, these cutters make life simple and easy for me, right fit, no complaints at all..."
Find Best Price at Amazon

Best Edge Treatment & Grooving Router Bits

Ohuhu Professional 13 Piece Watch Press Set/ Watch Case Closer with 12 Dies
Step two: Choose another die smaller than the rear cover, install on the bottom of press machine. Comes with 12 assorted dies: 24, 26, 28, 30, 31, 32, 33, 34, 36, 38, 40 & 42.
Reviews
"A thought on dies: some presses have machined metal dies and some have plastic ones. I think metal dies are probably intended for much higher-end watches (the kind I'd take to a professional to service) and in the hands of an experienced watchmaker the metal dies probably perform better than the plastic ones. The experienced watchmaker doubtless has techniques to ensure the finish on your $1500 watch is not damaged by metal dies."
"Absolutely thrilled with this watch press!"
"It took about all of my weight to get it to work, but the press snapped it back in place with out any damage to the watch."
"One of my watches was a bit challenging and it took several tries with different dies, but eventually I got the back on."
"It has a solid, substantial feel to it and the provide disks work for fairly large diameter watches down to pretty small ones."
"I'd go after them with pliers covered with a towel to keep from scratching the surface, but I knew one day I'd crack the crystal and I'd wind up with a pricey repair bill."
"It's simply a must have tool for replacing watch batteries. You put pressure on the watch crystal in any way and game over."
Find Best Price at Amazon

Best Router Bearings & Bit-Repair Parts

Zacro Watch Band Strap Link Pin Remover Repair Tool Kit for Watchmakers with Pack of 3 Extra Pins
Quickly and easily remove or add links to make your watch or bracelet fit your wrist. * With this small tool, you can get a suitable watch or bracelet without going to a repair store. * Suitable for : Tool adjust bands width up to size 30mm. * Size:(approximately 7.0 x 2.5 x 2.5cm). Turn the side wheel to move the needle and push out the pin Package included: Durable: Sturdy all-metal watch band link remover.
Reviews
"Adjustable for height as well is very helpful; the push pin only needs to come out about 1/8 inch and simply pulls out from there. If the pin is stubborn to reinsert and lock, give it a *tiny* push with this tool after making sure the direction and pin orientation is correct."
"As I aligned the first of 5 pins I ended up removing, even though the push rod remained level, I could see the tip of the pin wasn't staying level and had a slight "out of round" movement where it would go off axis. I didn't notice it until it neared the tip of the bracelet pin, at which time it became very evident. I thought if I took the time to micro-adjust the bracelet so the tool's pin hit the bracelet's pin, the act of it entering the bracelet's pin hole might keep it on track, however within a millimeter or two of it entering the hole the tool's pin bent, making it unuseable. I also used the tool to finish pushing the pins into place to join the bracelet after inserting them as far as I could by hand."
"However-do yourself a favor and go on youtube; do a search on DIY methods, plenty of videos showing how to perform this task with items you may find in your junk drawer."
"This thing was the best cheap buy I have had in a while."
"This is a wonderful product for those watch band fixes from home."
"Works well."
"The product came damaged and was unusable but once I stated my concern to Zacros they then seeked me out to make good on the refund- I appreciate their level of customer service- Things happen that is understandable but without me even asking they made good on the purchase and refunded it."
"This absolutely takes all the work out of repairing those bands that have the long pins that need to be pushed out."
Find Best Price at Amazon

Best Straight, Spiral & Trim Bits

Dremel 231 Shaper/Router Table
INCLUDES:• Table • Adjustable fence for versatile performance• Slot, groove, shape, sand and trim edges• Large, 8" x 6" worktable• Attaches directly to workbench SPECIFICATIONS:• Fits Tool Model: 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200. For use with rotary tool models 100, 200, 275, 285, 300, 395, 398, 400, 3000, 4000, 4200, 8200 and 8220.
Reviews
"While the unit generally is pretty well designed, the access hole for the spindle lock is too small for only but the tiniest of thumbs or fingers."
"Well made, but it's a little hard to figure out how to keep it still until you put that non-slip fabric between the Router table and the regular table. If you're going to attach it permanently, no worries except to be sure not to tighten the bolts to the point that the plastic base splits."
"For small and detailed work, this is a must have!!!"
"Then hardly used top of the line Dremel, the lock started slipping."
"Anyhow as far as the table goes, it's easy enough to operate, has simple, readable instructions in several common languages and may require a bit of reading and/or watching YouTube videos for those, less familiar with these types of miniaturized tools, or power tools in general. I.e: Safety Glasses, finger guards and make adjustments with the tool UNPLUGGED. The only real drawback is, mounting your Dremel tool in this decice takes a few minutes, and of course, that tool can not be used for any other purpose while mounted."
"Creates a beautiful router bench for the dremel and is nice-looking in the garage."
"If you raise the bit, find you overshot the intended height, turn the adjustment screw the other direction to lower the bit, nothing happens. And if you loosen the clamp knob, raise the vertical, tighten the clamp knob a different amount than before, the bit might actually be lower than before."
"Love this thing, easy to mount and I've done a bunch of routing on 1/4" plastic sheet now and it is great."
Find Best Price at Amazon